General :: Where To Get Device Drivers To Install Dell Optiplex 755?

Jan 28, 2010

Where can I find the device drivers so I can install RHLE v5.x on a Dell Optiplex 755?

View 5 Replies


ADVERTISEMENT

Hardware :: LAn Drivers Not Install Dell Optiplex 760?

Jan 22, 2010

i have installed windows as well as linux on my system(dell optiplex 760).i m trying to install lan card drivers but the following error occur."Error resolving dependencies "unable to resolve the dependencies for some packages selected for instalation.

View 1 Replies View Related

Fedora Installation :: Install F8 With DELL Optiplex 755?

Feb 7, 2009

I have a Fedora 6 in DELL Optiplex 755. When I installed Fedora 8, I got the following error message:

"An unhandled exception has occurred. This is most likely a bug. Please
save a copy of the detailed exception and file a bug report against
anaconda at http://bugzilla.redhat.com"

This error message is from action of screen: "Installation requires
partitioning of your hard drive. By default, a partitioning layout is
chosen which is reasonable for most users. You can either choose to use
this or create your own."

I chose: "Remove Linux partitions on selected drives and create default
layout" or

I chose other options, but I still got same error message.

Then I switched to a new HHD, but I still got the same error message.

View 2 Replies View Related

Ubuntu Installation :: No Sound In 10.4 LTS Fresh Install - Dell Optiplex 380MT

May 5, 2010

I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.

Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)

At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269

I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....

View 9 Replies View Related

Ubuntu Installation :: Lubuntu Install Fails On Dell Optiplex GX150?

Jun 4, 2011

I'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media

View 1 Replies View Related

Fedora Installation :: FC12 X86_64 Dell Optiplex 760 Install USB Keyboard Fail

Nov 18, 2009

When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.

View 13 Replies View Related

General :: GUI Not Working After Changing Resolution In Centos 5.4 On Dell Optiplex 280 / Fix It?

Mar 2, 2010

After installing a Dell Optilex 280 desktop with Centos 5.4, I configured sendamil, squid and all the extras I needed for a proxy and email server. All was fine until I switched the machine off. I had changed the resolution before and all was working fine. Now I have lost my gui , the system starts O.K but goes blank after "starting udev". I can use webmin to administer the server from a nother desktop/laptop but the monitor is totally blank. I tried most configurations on the /etc/X11/xorg.conf file even tried to create a new one using X -configure but still nothing changed. I cant afford to reinstall because of the time it takes to update the box, our broadband connections are so expensive this end of the world (Zimbabwe) and not so efficient. I have looked at the logs and tried to google but the solutions wont work for me? I suspect there could be an issue with the intel graphics adapter?

View 3 Replies View Related

General :: Cant Install NVidia Drivers On Dell Xps 15

Apr 14, 2011

I purchased Dell xps15 I got 1GB NVIDIA GeForce GT 525M graphics with Optimus I installed ubuntu 10.10 64bit and then installed the nVidia drivers by following procedure given as [URL] when rebooted I was dropped down to cmd prompt! then i reinstalled it and now want to install nVidia drivers so what should i do ?

View 2 Replies View Related

General :: How To Install Dell Wireless Car Drivers

May 4, 2011

m using a dell vostro 1510 and i want to install drivers for the wireless network adapter dell 1395 wlam minicard

m using Backtrack

View 2 Replies View Related

Debian Installation :: 6 On Dell Optiplex Gx 270 Computer

Jul 12, 2011

I try install debian 6 on my dell gx 270, but on some step of instalation I have error. I try other computer, also dell gx 270 but same problem. I try change cd rom, hard disc, ram .... but problem is still here. Is some chipset or something from dell is problem? I try install firmware-6.0.1a-i386-netinst.iso and debian-6.0.1a-i386-kde-CD-1.iso

View 3 Replies View Related

Ubuntu :: Using A Dell Optiplex 270 With A Penium 4 Processor 3 Ghz?

Nov 7, 2010

I have learned something that I wanted to share with everyone. I don't know if this has been posted before. I was using a Dell optiplex 270 with a penium 4 processor 3 ghz computer 4g RAM dual processor. I tried to put the new Ubuntu on it because everyone was raving about it. Everytime I put the 10.04 on it, it slowed down and became very sluggish. I then had to reformat it back to 9.10.

I had an extra computer here that I was not using. It was also a Dell but it was an Inspiron 530 with an Intel Celeron CPU 2 ghz and 2g RAM. Well, to my suprise, it works GREAT with Ubuntu 10.04. I have not had one issue with it since I installed the new Ubuntu. In my opinion, it is a processor issue. I don't think that Ubuntu 10.04 works with a Penium 4 processor. It does work GREAT with a Celeron CPU processor.

It has been my understanding that Ubuntu (Linux) was made and has been made for older and new computers. It does seem that the new releases have been made only for the newer computers. Has anyone ever had these types of issues or come to these types of conclusions?

View 9 Replies View Related

Hardware :: No Sound On Dell Optiplex 980 After Update

May 11, 2010

I recently switched my computer over to Fedora 12 from Win7. When I booted off the Live CD everything worked great, but after I installed and ran a yum update, I have no sound! The volume is not muted in any of the places I could find to look. I had the same problem in Ubuntu 10.04, which is why I decided to switch back to Fedora thinking I may not have the issue there ... but alas I was wrong. Here is some system info:

amixer output:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 57016 [87%] [on]
Front Right: Playback 57016 [87%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 48777 [74%] [on]
Front Right: Capture 48777 [74%] [on]

lspci output (relevant part)
00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 05)
dmseg | grep hda output
hda_codec: ALC269: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1288: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1368: realtek: Enable default setup for auto mode as fallback

View 4 Replies View Related

CentOS 5 Hardware :: No Graphics On Dell Optiplex 780?

Apr 2, 2010

I have a brand new OptiPlex 780 from Dell, I downloaded CentoOS x86_64 from [URL]. The installer runs the graphics mode OK, when I reboot into normal, the graphics doesn't work.

The last messages I see are:

Red Hat nash version 5.1.19.6 starting
starting clock,
starting UDev

then the display goes away, the montior says "Not Support" The monitor is 1 day old and supports VGA to 1680x1050.

I try pressing "I" (and/or "i") when Red Hat first starts, but the interactive menu doesn't show.

I have two idenical machines, the other is running XP (the CentOS was also before I loaded CentOS), WinXP is allowing screen resolutions of

- 800 x 600 @ 60Hz, 72Hz, or 75Hz
- 1024 x 768 @ 60Hz, 70Hz, or 75Hz
- 1280 x 1024 @ 60Hz or 75Hz
- 1680 x 1050 @ 60Hz
...all working on the same monitor.

During Bios boot, the monitor shows 600x800 @ 60Hz, during the text-only start of CentOS, it shows 720x400 70Hz. After CentOS boot shows starting udev, the montior breifly shows 720x400 70Hz, then "Not Support".

So....
Why isn't CentOS using the same graphics mode it used during installation (that worked fine)

View 1 Replies View Related

CentOS 5 Hardware :: Won't Boot On Dell Optiplex 320?

May 6, 2010

I'm trying to run CentOS 5.4 (downloaded yesterday - CentOS-5.4-i386-bin-DVD.iso). Install process run well Pick default options on install. On partitioning part I've pick "Remove all partitions on selected drives and create default layout"

It get stusk after grub loading at : root (hd0,0) Filesystem type is ext2fs, partition type 0x83 Kernel /vmlinuz-2.6.18-164.el5 ro root=/dev/VolGroup00/logVol00 rhgb quiet [linux-bzImage, setup=0x1e00, size=0x1b3634] stops there, and not load the operating system

System : Dell Optiplex 320
PROC : Interl pentium D 3.00 Ghz
Mem : 2 GO DDR2 Windows XP SP3 was installed previously on this machine.

View 1 Replies View Related

Ubuntu :: Kernel ACPI Bugs With Dell Optiplex 320

Dec 21, 2010

I'm trying to get WOL (Wake On Lan -suspend and hibernate don't work either) working in Ubuntu 10.10 amd64 on the above computer for a family member but seem to not be getting anywhere! WOL is enabled correctly I verified that after shutting down in windows XP that the computer came on with WOL. I have tried the following:

Enable wol
Code:
ethtool -s eth0 wol g

The computer shuts-down but won't wake up by WOL packet. Make sure the Ethernet (MAC0) can wake up PC
Code:
echo "MAC0" > /proc/acpi/wakeup
The computer shuts-down but won't wake up by WOL packet

Kernel parameters:
Code:
acpi=off
Code:
apm=power_off acpi=off
Code:
acpi=nopci

With all of the above, the computer doesn't not power down after shut down. The power button light is still on and has to be pressed to turn it off. Here is the strange thing: WOL works after manually tuning it off! I tried inserting apm module but it is not available.

View 3 Replies View Related

Ubuntu :: Graphics Very Slow On Dell Optiplex GX240

Feb 21, 2011

I installed Ubuntu 10.10 32-bit on a Dell Optiplex GX240, it has an ATI Rage 128 Pro Ultra TF (from lspci output) and all the graphics run very slow (I'm assuming because OpenGL and hardware acceleration are disabled). I Googled the issue and found several solutions but non of them worked. I tried installing the ATI Catalyst driver but it doesn't recognize the graphics card. I also tried to install the fglrx drivers but when I run fglrxinfo I get a segmentation fault. So the X server is running with the open source (r128) drivers and it's really slow.

View 2 Replies View Related

CentOS 5 Hardware :: Dell Optiplex 960 Screen Blanking ?

Sep 8, 2010

I've just installed 12 new Dell Optiplex 960 computers with Dell 2009W monitors. They are identical hardware and OS installs. Some of them are exhibiting a weird problem with their screens: They boot up and run just fine, but then the monitor goes black for 2 or 3 seconds, and comes back, with the small DVI icon popping up in the upper left corner to show which video connection is active. This repeats at random intervals continously; sometimes just a few seconds between, and sometimes many minutes.

The problem initially happened on just one machine so I had Dell swap the motherboard thinking it was a hardware issue. That did not fix it. Soon after that, I got reports from several users of the same problem on other of the new machines.

I've done a very basic install of CentOS 5.5, skipping all of my local configuration management stuff, and it still happens. Then I installed Ubuntu 10.04 and over the last few hours the machine has been rock solid. No video issues at all.

Here is the output of lspci:

View 10 Replies View Related

CentOS 5 Hardware :: Dell Optiplex 320 And Kernel-2.6.18-194.11.3.el5.i686.rpm Hang

Sep 17, 2010

I have read all of the articles I could find on the problems. I am using the lilo bootloader as grub doesn't work. I have also added pci=nomsi to my lilo.conf and ran lilo -v. I can get the system to boot with kernel-2.6.18-8.el5. However I can't get the system to boot with kernel-2.6.18-194.11.3.el5.i686.rpm. When I boot with kernel-2.6.18-194.11.3.el5.i686 the system hangs after it prints bios data check successful. I tried adding suppress-boot-time-BIOS-data to my lilo.conf (I ran lilo -v after the change) and the system still hangs. The Optiplex 320 is running bios 1.1.12

Why won't newer kernels work? Is there a way to get more information to print before the hang to aid in debugging?

View 16 Replies View Related

CentOS 5 :: Ver5 On Desktop (DEll OptiPlex), Power Cut Oops!?

Sep 10, 2011

I no expert and this was a bit of mucking around. Installed Version 5 dot something on a desktop (DELL OptiPLex) with a couple of extra HDDs, for a server to play with (samba to Windows). I used the drives as a single logical drive via LVM.

We had a power cut, now it doesn't work. In fact it's been hanging around for a couple of years and before I dump it I wonder if there is any chance of getting some of the wife's letters, pictures, etc that I promised I try and get off.

The /boot partition seems to be there and I've attached a photo of what happens at boot, and I admit....I haven't a clue what it all means. Also I did not think ahead and did not create a recovery disk. I know, I know heap damnation on me for being so reckless, but any chance I can get myself back in the wife's good books?

View 7 Replies View Related

Ubuntu Installation :: Dell Optiplex GX270 Boots To Blank Screen

Aug 16, 2010

My next door neighbor has a dell Optiplex gx270 and wanted Ubuntu installing.
Hardware:
1gb RAM
P4 2.4
Intel 82865g Onboard Graphics.
40gb HDD

I tried the live cd and it froze on bootup, so I thought it might not be enough ram as the case sticker said 512mb ram. So I booted the minimum install cd and installed ubuntu desktop on it and then rebooted, when it boots i get grub and then screen will either do 1 of 2 things.
1. I get another flashing cursor in top left corner and then cursor stops flashing and then nothing happens at all.
2. Then screen will go black and nothing will show at all.

I have tried updating the BIOS, adding i915.modeset=0 to grub, didn't work either. Also couldn't find the xorg.conf under /etc/X11 to change driver to vesa. After several reboots atleast 30 since the check disk think showed and then it froze again. it booted correctly so I tried the latest intel driver from xorg edgers ppa. Rebooted and still the same thing happens. tried 2 different installs now and get same results. I have had to put winxp on it so he can atleast use it, but this will run out in 30 days unless he decides to buy it.

View 6 Replies View Related

Ubuntu :: Dell Optiplex 960 With NVIDIA Quadro NVS 450 - Blank Screen With No Cursor??

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards.The problem is that, after that, all what you get is a blank screen, with not even a cursor.The same happens when you install Lucid: blank screen with no cursor.

Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset.In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

Ubuntu Installation :: Dell Optiplex GX60 And Getting A Black Screen With White Letters Of Errors?

Apr 8, 2011

I am trying to install Ubuntu on my Dell Optiplex GX60 and am getting a black screen with white letters of errors and other stuff.

For instance.bad_area_nosemaphore+0x90/0x130
do_page_fault+0x378/0x440
error_code+0x73/0x78
etc.

View 1 Replies View Related

OpenSUSE Hardware :: Dell 725 Printer Drivers / Drivers Not Seem To Be Available When Trying To Configure?

Sep 12, 2010

I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.

View 3 Replies View Related

OpenSUSE Hardware :: Install Drivers For Dell Wireless 1397 802.11b/g Half Mini Card?

Jan 7, 2010

How can i install drivers for Dell Wireless 1397 802.11b/g Half Mini Card.I'm using openSUSE x86_64 on my Dell Inspiron 1440.

View 6 Replies View Related

General :: Drivers For Dell I5 - Sound - Wifi - Ethernet

Apr 4, 2010

Have just got a Dell i5 and have installed Fedora 8, but I dont have any of the device drivers (sound, wifi, ethernet etc).

View 6 Replies View Related

Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"

Oct 28, 2010

I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.

The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:

1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??

View 9 Replies View Related

General :: Which UNIX Distribution Works On A Dell M5010 Without Having To Compile Any Drivers

Jul 22, 2011

I want to have UNIX or Linux on my laptop but I found that the wireless did not work on all the ones I tried. I have not tried again for over 6 months but don't have the time to experiment. It took me a week straight last time, I tried PCBSD (8.1), Ubuntu, OpenSUSE (11.3), and various others. The laptop was just released then, so I can understand why all the drivers might not have been compatible then.

I am hoping someone else has successfully added a distribution and can tell me which.

LAPTOP: Dell Inspiron M5010 (15R) [not to be confused with Dell N5010, which is the Intel version]

Here is my hardware (from Speccy):

View 1 Replies View Related

OpenSUSE Hardware :: Install Drivers For Easycap Dc60 USB Video Capture Device?

Jan 24, 2010

I'm making an attempt to install drivers for my easycap dc60 USB video capture device. Someone was good enough to make a driver project on sourceforge. Problem is I cannot get it compiled.

Code:
Building
make[1]: Entering directory `/home/jan-bart/Download/easycap_dc60.0.4/src'
make -C /usr/src/linux-headers-`uname -r` M=/home/jan-bart/Download/easycap_dc60.0.4/src modules
make: Entering an unknown directory
make: *** /usr/src/linux-headers-2.6.31.8-0.1-desktop: No such file or directory. Stop.
make: Leaving an unknown directory

[Code]...

View 5 Replies View Related

Installation :: Install Debian 5 On OptiPlex GX1?

Mar 1, 2010

I'm trying to install Debian 5 on OptiPlex GX1, how do I do it?

View 2 Replies View Related

General :: Drivers - Unable To Activate Wireless After Device Has Been Re-enabled

May 8, 2010

Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.

However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved