General :: Where Is This Location On Ubuntu "/pool/main/b/b43-fwcutter/"?
Apr 9, 2011I have to install a package that is in this address "/pool/main/b/b43-fwcutter/"
where can I find it ??
ADVERTISEMENT
General :: Verifying The DMI Pool Data?
May 5, 2011I was a windows XP user and one fine day my windows crashed and blue screen of death appeared. I have downloaded Ubuntu and created an ISO image on my pendrive with the help of the another computer as per the steps mentioned on the linux website. Now when am tryin to boot my corrupt PC with pendrive i cannot move beyond the comment " verifying DMI pool data" nothing happens later.
View 3 Replies View RelatedCentOS 5 Networking :: Setup A Network To Network VPN Tunnel Between Our Main Office And A Temporary Location?
Aug 12, 2009I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.
Network A (Main Office) (OpenBSD using isakmpd)
Network: 172.16.8.0/24
External IP: 1.1.1.1 (obviously not the real IP)[code].....
General :: Delay Pool - Restrict User To Download Heavy Files
May 15, 2011I need to restrict users if their download file size exceeds xxx amount, set later download speed to "256kbps".
OS: Centos 5.5
Squid 3.1.8
Ubuntu Networking :: How To Install B43-fwcutter
Sep 1, 2011I have a compaq Presario C500 windows vista and I installed Ubuntu natty Ubuntu 11.04 by using Wubi.What I really need right now is an executable b43-fwcutter, and I don't know how to get it. When I boot up in Ubuntu, I've got no wireless. There's an access point I can connect to (if not using Ubuntu), but Ubuntu isn't activating the interface card. I've got no wired interface nor hope of one.
I slogged through countless webpages and came to the instruction [URL].. that I should install b43-fwcutter and use it on wl_apsta_mimo.o. It tells me to install using command `sudo apt-get install b43-fwcutter' (sorry if that's not the proper etiquette for posting a command) but I can't install with that command because apt-get wants to use the Internet. (err msg: "E: Unable to locate package b43-cutter") So, I have wl_apsta_mimo.o and the other files that come with it in directory broadcom-wl-4.150.10.5. But I don't have b43-fwcutter and I can't figure out how to get it.
[URL].....ernet%20access tells me "b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ " but I can't find that directory. Where is it?
Ubuntu Networking :: E: Couldn't Find Package B43-fwcutter
Mar 6, 2010I did a full install of 9.10 on my Dell Inspirion 1200 laptop & use a Dell 1350 card, after several posts and replies I went to [URL]and followed the instructions for Ubuntu/Debian. This is the result I get....
mike@mike-laptop:~$ sudo apt-get install b43-fwcutter
[sudo] password for mike:
Reading package lists... Done
Building dependency tree
[code]....
I followed this procedure before installation (live CD) and it successfully found and installed the firmware. Apparently it was saved in live CD. What do I need to do?
Ubuntu Networking :: Searched The Forums And Tried Several Things (b43-fwcutter, Among Others) And Cannot Get Anything To Work?
Feb 8, 2010I am having problems making wireless work on my pc. I have searched the forums and tried several things (b43-fwcutter, among others) and I cannot get anything to work. My computer is an HP ze4900, broadcom wireless Quote:
*-network:1 UNCLAIMED
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
[code]....
Networking :: B4312 Card Not Working With B43-fwcutter
May 17, 2010the title says it all really, i carn't get the wireless card to be recognised when using the b43-fwcutter firmware, it works ok using the bcmw-kernel-source (STA), but i don't want to use that one (if i can help it- even thow it is better)
the computer it's on is a DELL INSPIRON 1545, using karmic 9.10, ( it was the same under bt4 distro), iwconfig = eth0 no wireless extentions lo " no wireless extentions"....!
Debian Hardware :: Wireless Card - FWCutter Not Working?
May 15, 2010I am pretty new to Linux still. I have a desktop I'm trying to set up as a Linux machine. I'm apparently running a testing version of squeeze (I was running lenny I thought too many updates?). Anyway, I've been trying various things all night to try to get my wireless card to work. The system tells me I have a Broadcom BCM4318. When I run dmesg I get this:
[ 496.640869] b43-phy0 ERROR: You must go to [URL] and download the latest firmware (version 4).
[ 619.374662] input: b43-phy0 as /class/input/input25
[ 619.410838] firmware: requesting b43/ucode5.fw
[ 619.416638] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Over and over. When I head to the website, it tells me to run b43-fwcutter. I've tried installing that and it says it installs fine but nothing ever changes. Everything I've found says that should work so I can't really find any suggestions for what to do if it doesn't.
Ubuntu Networking :: B43-fwcutter And Can't Get Broadcom BCM4303 (rev.2) WiFi To Work On On HP Pavilion ZV5000
Feb 23, 2010Can't get my WiFi to work on my HP. My WiFi chip is bcm4303 (rev. 2) this is a new thread from http://ubuntuforums.org/showthread.php?t=1400427&page=4 ) So, I reinstalled Ubuntu (fresh install) Activated the Broadcom b43leagacy Wireless driver. When rebooting, the WiFi LED on the On/Off switch blinks.
[Code]...
Ubuntu :: Hangs At DMI Pool Data?
Nov 26, 2010I recently removed windows 7 from my computer and am now only using ubuntu. I used a live cd to grow the partition to use the new available space, but now the system just hangs at the Verifying DMI pool data section of bios. This is usually the first thing before grub loads.
View 1 Replies View RelatedUbuntu :: OpenMotif : Create Network Location Link As Local Filesystem Location?
Apr 26, 2011I'm working with a program that uses Open Motif to create all of the widgets, including the Open File dialog box (obviously). However, Open Motif being kinda old-timey, 80's vintage, and for the most part now an abandoned project, it is quite clunky. So, actually what I need to do is to open some files located on my work server. I have already successfully connected to the relevant server directories with Samba, and with programs built with GTK+ (such as GIMP) I can open files across the network because I have created a bookmark in Nautilus, and those bookmarks appear in the Open File dialog box created by GTK+. Now, Open Motif is different: it doesn't see network locations, orNautilus shortcuts. When I type "smb://serveripyadayada" in the search folder, it really doesn't like it and complains. So, what do I do? Can I get somehow Open Motif to open a network location? Or can I do a run-around and place a shortcut in the file system that points to the network location?
View 2 Replies View RelatedUbuntu :: Firefox Java With Playing Yahoo Pool
Sep 23, 2010I got this working before, but now I have a freshly installed Ubuntu 10.04 and I wanna play yahoo pool and I followed all those crazy insane commands they posted but they (java) didn't help at all, their support and help is really poor as I get errors like directory does not exist or no such file. I basically installed the jre-6u21-linux-i586.bin file in my home directory like and used all their commands like cd /home and all that. Here is my ls output they say always to check, but it seems like I installed it but I can't get it installed with firefox together.
[Code]....
Ubuntu :: Nautilus Location Bar: How To Write Manually Location
Oct 30, 2010I have been testing ubuntu 10.10 maverick, it has some nice features. Anyway I am missing the possibility of writing manually the folder you want to go on nautilus using the Location bar. It was used to have some kind of icon which you can click and it switched between graphich breadcrumbs or the location of the folder and you could changed it manually, you know what I mean?
View 2 Replies View RelatedUbuntu Installation :: Stuck In BIOS -Verifying DMI Pool Data
May 20, 2011I was dual-booting Windows 7 and Ubuntu 10.10 till recently. Then I had to reinstall Windows. After re-installation of Windows I did not try to restore Grub and deleted Ubuntu partitions on disk thinking that I'll install newer Natty version. But now when I try to install Ubuntu 11.04 using pen drive it gets stuck in bios showing message "Verifying DMI pool data ....". I also tried to boot GParted, memtest and Windows 7 with the same pen drive. Same thing occurred with GParted and memtest but Windows 7 installation did not stuck and went as usual. So I guess it's not hardware.
View 5 Replies View RelatedSoftware :: OpenVPN Address Pool - Know To Route
Aug 3, 2010I have a question regarding OpenVPN. I have configured my own vpn server. It is in a private network 192.168.0.0. The ip addresses I am using for the vpn connection are in the 10.9.1.0 network but I want to connect my ovpn clinets to the 192.168.0.0 network. I read the manuals and I think the "push route" command will work for me, but I cannot understand fully the description of the command "push route".
# Push routes to the client to allow it to reach other private subnets behind the server.
# Remember that these private subnets will also need to know to route the OpenVPN client
# Address pool (10.8.0.0/255.255.255.0) back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
So the questions:
1. These private subnets behind the server are routed from my vpn server or from another router
2. How these private subnets "know to route" the open vpn address pool, is this a configuration of the router for this networks (192.168.0.0)or ?
Ubuntu Installation :: Verifying DMI Pool Data - Windows 7 Dual Boot
Dec 24, 2010I installed ubuntu 10.10 on a machine that had windows 7 x64. itts installed on a seperate HD, but now when I boot to the harddrive with windows 7 all i get is "verifying DMI pool data" how do I fix this so I can get back to windows 7 as well?
View 9 Replies View RelatedDebian Configuration :: Data Pool - ZFS Disk Labeling
Jan 31, 2016I created my data pool using /dev/disk/by-id and things went well. a recent view of zpool status however showed /dev/sdb and /dev/sdc being used instead. how can I be sure a rearrangement of my disks wont cause error?
View 2 Replies View RelatedServer :: Configure Samba Share That Users From Ip Pool?
Aug 7, 2010how to configure samba share that users from ip pool (for example 192.168.1.200-210) have accest without login and rest users form ip pool (192.168.1.2-199 and 192.168.1.211-254) have to past autorization.
View 1 Replies View RelatedDebian :: Sometimes Boot Wait On Random - Nonblocking Pool Is Initialized
Dec 4, 2015Sometime system wait during boot a long time on
Code: Select allrandom: nonblocking pool is initialized and Code: Select allPM: Starting manual resume from disk etc.
When everything is ok boot took around 20seconds. But when this problem occur it can take around 5 minutes. It occure during normal boot, but there are some information about resume from hibernation in log. But I didn't hibernate it. And hibernation doesn't work reliably so I removed uswsusp because I tried to fix hibernation with installing uswsusp first.
My laptop: MSI EX600X-033Sk (C2D T5250, Nvidia 8400g, It has firewire, usb2.0, ...)
I tried to google stuff like "Jessie slow boot", "Stack on random: nonblocking pool is initialized" etc but I didn't found any solution.
Here is few parts of my kern.log:
Code: Select allDec 2 21:27:57 MSI-EX600X-033SK kernel: [  1.950232] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
Dec 2 21:27:57 MSI-EX600X-033SK kernel: [  1.952800] sd 0:0:0:0: [sda] Write Protect is off
Dec 2 21:27:57 MSI-EX600X-033SK kernel: [  1.955190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 2 21:27:57 MSI-EX600X-033SK kernel: [  1.955218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Code] ....
Networking :: Public Subnet Behind Router - Use IP Pool On LAN Side Interface?
Aug 5, 2010following are my Linux router information
eth1= WAN IP= 110.88.89.66/32
Gateway= 110.88.89.65
eth0= LAN IP= 192.168.1.1/24
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0
[Code]....
My ISP gave me IP Pool 110.88.90.68/29 to use this on my LAN. my question is how can I use this IP pool on LAN side interface. i think now its simple. 192.168.1.0 /24 is my LAN network and I can not change this, because i have near 180 PCs on my LAN.
Server :: Updating Time - Recommended Interval For Connecting To The Ntp Pool?
Apr 22, 2011I am managing a PBX which runs redhat enterprise linux. The time on it is always getting out of sync, which causes the time on the phones to display incorrectly. I can't figure out for the life of me why the time keeps changing. How can I set it to update it's time every day or two? I don't want to hit ntp.org every day, as is recommended. What's the recommended interval for connecting to the ntp pool? The kernel is Linux 2.6.9-67.0.4 (from uname -a)
View 1 Replies View RelatedUbuntu :: Edit Location At Location Bar?
Apr 30, 2010i found that 10.04 hasn't edit location icon at location bar of nautilus. how to get it?
View 2 Replies View RelatedGeneral :: Access To Squirrel Main Without A KDE Or General Account?
Jun 27, 2010A friend of mine helped me set up a server which includes Squirrel Mail.It?s CentOS 5.3.I have a person who would like to access Squirrel Mail at remote sites.My questions is, I can create an account on the server which has KDE and the usual general applications and he would have the remote access Squirrel Mail but he doesn?t need nor does he want to access KDE or anything else on my server. He just want an account so he can use Squirrel Mail.
View 1 Replies View RelatedUbuntu Installation :: Grub With Full USB Install 10.04 - If Hdds Are Attached, Boot Hangs On "checking Dmi Pool Data..."
Feb 18, 2011I've recently tried to do a full install to a USB stick using a 10.04 cd.
2 things happen as I boot:
1. if Hdds are attached, boot hangs on "checking dmi pool data..."
2. if hdds not attached, "hdd error" scrolls across screen
boots normally w/o the usb stick. I've set up my partitions on usb stick as
1: fat32 2gb <<windows/storage
2: fat32 1.5gb << future persistent install
3: ext4 4gb << hoped-for full install
1 is the first partition so windows finds it nicely. Before install, i unplugged my hdds so that grub wouldn't get confused. I told the installer to put the full install on sda3 with no swap space. I checked (advanced button on summary page) that bootloader is being installed to the usb on dev/sda (sda since no other drives attached). This should put it in the MBR (i think?)
Seems like I pressed all the right buttons huh? Is there a way to diagnose grub and see what's wrong? is there a reason grub may not initialize properly from a usb drive?
General :: Location Of MySQL Log Files On Ubuntu
May 11, 2011I would like to delete the MySQL ib_logfile but do not know where the files are located on my machine. I am running the latest version of Ubuntu.
View 1 Replies View RelatedFedora Installation :: Fc11 First Boot Hangs On "Verifying DMI Pool Data"
Oct 18, 2009I had Fedora11 (default layout) running on a separate hard drive (winXP on the other drive). After the FC drive failure I replaced the drive and did a fresh install again. This time I tried a custom layout to keep the /home on a separate partition. The installation went without a hitch, but on first boot the system hangs with "Verifying DMI Pool Data......"
XP boots fine though. Looks like grub doesn't get loaded. I can boot with the installation cd and get into recovery mode, everything seems fine on the fedora disk. Fdisk result:
Grub.conf:
General :: Get Main Board Product Name Without Sudo?
May 10, 2011I have found two ways to get the main board product name: [sudo lshw][sudo dmidecode] Is it the nature of this info that's making it protected or is it the source code of these tools?Is there any way to get main board product name without sudo? Shall I dig inside the source code of these tools?
View 2 Replies View RelatedGeneral :: Ssh From Virtual Machine To Main Host?
Mar 17, 2011ok how do you add a rule which allows a virtual machine to connectto ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedGeneral :: Cant Get Clear Mint Main Menu?
Jun 26, 2011i am dragged myself from windows to mint 10 julia..while downloading the screenshots is like <http://www.linuxmint.com/pictures/screenshots/julia/menu.png> but after installation i got only menu like the basic menulike in ubuntu.am new to minti installed inside windows.am i done anything wrong with installation
View 3 Replies View Related