I installed ubuntu 10.10 on a machine that had windows 7 x64. itts installed on a seperate HD, but now when I boot to the harddrive with windows 7 all i get is "verifying DMI pool data" how do I fix this so I can get back to windows 7 as well?
View 9 RepliesI had Fedora11 (default layout) running on a separate hard drive (winXP on the other drive). After the FC drive failure I replaced the drive and did a fresh install again. This time I tried a custom layout to keep the /home on a separate partition. The installation went without a hitch, but on first boot the system hangs with "Verifying DMI Pool Data......"
XP boots fine though. Looks like grub doesn't get loaded. I can boot with the installation cd and get into recovery mode, everything seems fine on the fedora disk. Fdisk result:
Grub.conf:
I was dual-booting Windows 7 and Ubuntu 10.10 till recently. Then I had to reinstall Windows. After re-installation of Windows I did not try to restore Grub and deleted Ubuntu partitions on disk thinking that I'll install newer Natty version. But now when I try to install Ubuntu 11.04 using pen drive it gets stuck in bios showing message "Verifying DMI pool data ....". I also tried to boot GParted, memtest and Windows 7 with the same pen drive. Same thing occurred with GParted and memtest but Windows 7 installation did not stuck and went as usual. So I guess it's not hardware.
View 5 Replies View RelatedI was a windows XP user and one fine day my windows crashed and blue screen of death appeared. I have downloaded Ubuntu and created an ISO image on my pendrive with the help of the another computer as per the steps mentioned on the linux website. Now when am tryin to boot my corrupt PC with pendrive i cannot move beyond the comment " verifying DMI pool data" nothing happens later.
View 3 Replies View RelatedI've recently tried to do a full install to a USB stick using a 10.04 cd.
2 things happen as I boot:
1. if Hdds are attached, boot hangs on "checking dmi pool data..."
2. if hdds not attached, "hdd error" scrolls across screen
boots normally w/o the usb stick. I've set up my partitions on usb stick as
1: fat32 2gb <<windows/storage
2: fat32 1.5gb << future persistent install
3: ext4 4gb << hoped-for full install
1 is the first partition so windows finds it nicely. Before install, i unplugged my hdds so that grub wouldn't get confused. I told the installer to put the full install on sda3 with no swap space. I checked (advanced button on summary page) that bootloader is being installed to the usb on dev/sda (sda since no other drives attached). This should put it in the MBR (i think?)
Seems like I pressed all the right buttons huh? Is there a way to diagnose grub and see what's wrong? is there a reason grub may not initialize properly from a usb drive?
I have a laptop dual booted with windows vista and ubuntu.I downloaded certain movies and music files while using windows vista,which are there in my hard disk,My question is can i access these music and video files when i boot into ubuntu,and can i play them?
View 5 Replies View Relatedi want to know how i can use data which is situated in windows hard disks on linux red hat 5 operting system. i m using dual boot concept and i have installed both windows and linux properly. 3 partition of hard disks are used in windows and one in linux. my data like songs are situated in one of the windows partition. now i want to know how i can use that data when i m working on linux.
View 1 Replies View RelatedI recently removed windows 7 from my computer and am now only using ubuntu. I used a live cd to grow the partition to use the new available space, but now the system just hangs at the Verifying DMI pool data section of bios. This is usually the first thing before grub loads.
View 1 Replies View RelatedGenerally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
View 2 Replies View RelatedI am installing a custom 8.04 live disk (basically, a mirror of my whole system with user data intact, sans all non-OS files) from a USB key with remastersys for the .iso creation, and UNetbootin for the bootable USB on a brand new 120GB PATA WD HDD. Both do nicely so far, so I have a working livedisk to use until I need to install Ubuntu to the drive.
I had a pure linux box, but I need to add XP with dual booting now- I have to use Autodesk Inventor 2010 software for my college class on my laptop, so I don't drive 30 miles to use the 1 computer lab equipped with that software. I'm not new to Linux, but I am new to more in-depth partitioning. I've taken the lead and looked into things- read this good guide, among others:
HTML Code:
http://www.psychocats.net/ubuntu/partitioning and noticed that there is a way to more deftly use partitions so that personal files can be shared access and write between Windows and Linux partitions- with this:
HTML Code:
http://www.fs-driver.org/ Ubuntu is still my main OS, but being able to access all my media/data files between the 2 systems would be nice. Problem is, until now, I've put everything on a single partition because I didn't know better. Now I do, but am a bit confused with all the guides as to what's most efficient, especially in my case where full RAM speed is crucial to running a single program.
Here's what I know I need to do: 1. The Windows XP install I know needs from 20-30GB for Inventor 2010 LT to work well. I don't need anything else in XP spacewise- it's just being added for Inventor. 2. I'd like to create a separate /home partition for Ubuntu this time to save my user data, making future upgrades much more painless (I will be getting Lucid soon). How that works when upgrading, though, I don't know yet..
3. I'd like both OSes to share all my personal files (docs, pics, music, Inventor design files) if it is an efficient choice that works without problems.
4. Finally, because 2GB is minimum for Inventor to run decently, I need to maximize the speed of my RAM for it- from my reading, these so-called "swap" partitions can somehow be added for buffering this- people seem to sugguest the swap be half the size of the RAM for fastest speed, and some say add separate /usr or other partitions. I'm not clear on what would be most efficient for me.
I have limited HDD space- because of my laptop's BIOS, this single 120GB drive is the biggest I can get on my laptop, so efficient partitioning would make a huge difference for me. Before this, a 60GB HDD was in this. I'd like to see some added space for my data storage, but still keep things as fast as possible for Inventor when I use it, and Ubuntu.
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I created my data pool using /dev/disk/by-id and things went well. a recent view of zpool status however showed /dev/sdb and /dev/sdc being used instead. how can I be sure a rearrangement of my disks wont cause error?
View 2 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies View RelatedI am newbie to linux os.I want to dual boot ubuntu 9.04 with windows 7 which is already running on my pc.When i tried to do it with live cd i am getting an error message "Permission denied" while extracting files from cd drive.The log file shows the information given below.My system specifications are code...
How to do proceed with it?Any body know about the error in the log file?
For a couple of years I have wanted to use a version of Linux rather than Windows. I currently use XP and regard myself as a reasonably experienced Windows user. My current system has two SATA HDDs - roughly 500Gb, the 'D' drive, and 140Gb, the 'C' drive, and I have 1Gb RAM. So I decided to try Ubuntu 9.10. I downloaded the installation file, created the disk and ran it live for a time. Then I decided to take the plunge and install properly.
I created free space on the C drive, around 17 Gb, in which to install ubuntu. The installation into 'the highest amount of free space' seemed to go well but when I rebooted I was given no opportunity to select Ubuntu - it booted straight into XP. So I tried again. This time I chose to 'install them side by side'. Again the installation went well but again, on the reboot, the system went straight into XP. I guess I must be missing something - can anyone tell me how to install so that I can boot to either XP or Ubuntu?