I have recently downloaded ubuntu server and want to solve a scenario.I have 2 internet connections in my office and I am installing ubuntu on a machine with 3 lan cards now I want ubuntu server to distribute internet from both connections to my network.
View 9 Repliesi don't know the proper commands to list my system information. Up until recently, the internet worked fine, but suddenly stopped. I opened up YaST2 and found that the network device was set up to never turn on, and i switched it to "at boot time" but it still doesn't work.
View 9 Replies View RelatedI had a router crap out yesterday. I'd been testing out a new one for the last few days and just reconfigured it to be the main. Took the old one down and everything in my house (Windows 7 PC, XP Files server, Ubuntu PC , windows 7 laptop, android tablet, ps3, etc) seems to be working fine whether it be hard wired or wifi. All except my ubuntu 10.04 laptop. It worked fine before the swap so I can't figure out what's going on.
I'm able to connect to the new SSID without issue but I can't resolve any external names and when I try to ping the default gate way every other packet has (DUP!) behind it. If I'm hardwired I don't get the dup! when pinging the default gateway but I still can't resolve any external names. I have provided the results of an ifconfig and the results of a ping to the default gateway below.
cooley@Quigon:~$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=2.98 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=3.04 ms (DUP!)
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=3.50 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.72 ms (DUP!)
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=8.09 ms
[Code]...
I've got fedora 11 set up to use network time protocol to sync my laptop's date & time when I'm on-line. The question is simple really, I've added a local universality's time server (what is public) and it's live. but it's added to the end of the default time servers what come with fedora. How do I get fedora to just use the local time server, is it a case of removing the default time servers for fedora, but there is a box what says advanced options which are. sync system clock before starting service ???? & use Local time source (( is that the same as the local ntp server that I've got set up ))Hope some body can help me with the network time protocol part of Date/Time settings.
View 9 Replies View RelatedIn the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies View Relatedhow do you configure your network time protocol to use a specific time server ip address
View 2 Replies View RelatedI was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies View RelatedI've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
Under a Linux shell, how can I change the creation time of all a folder's files to the current time?
View 2 Replies View RelatedI have a linux (Slackware) machine and the time/date is like, June 23rd 2003, 10:00am (It's 11 here) and I am not able to set the time to have it correct. I change the timezome to Montreal but the time is still wrong.
Is there a way to force it to sync with my domain controler or even another online NTP server?
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
View 3 Replies View RelatedMy computer has different time when booting to linux or Windows.How to make the time the same?My computer time is 10:57pm Apr 14 when booting to linux.My computer time is 2:57am Apr 14 when booting to Windows Vista Home Premimum SP2.Both OS are set to the same time zone (GMT-5. Eastern Time US & Canada).
View 5 Replies View Relatedget the values for the user time and system time for a process.i have tried getrusage to get values of ru_utime and ru_stimebut these don't seem to be correct
View 3 Replies View RelatedI admit this has been a particularly bad year for me, but it isn't THAT unusual by my standards. I typically spend I would reckon quite honestly about 70-80% of my time with computers just fixing stuff up that either I broke or was broke in the first place. Usually it's the latter by some considerable margin. That's really inefficient, isn't it? I just wondered what others' experiences are of this phenomenon. Obviously I don't do computers for a living or I would have starved years ago. So what is the Panel's consensus view on the percentage of wasted time we should expect to spend, on average, "running just to stand still" on maintenance tasks?
View 5 Replies View RelatedI'm having problems connecting to our network time capsule the capsule appears in my network places and I can open it up but there are no files present. However when on my house mates Mac there are many different file types present. At first I thought it may be a formatting problem but the files can be accessed from a windows machine also.
View 1 Replies View RelatedI recently enabled autologin on my linux distro, now during login network manager needs to have a password entered before it will load. How do I set it so that I don't have to enter the password every time?
View 1 Replies View RelatedI have to manually enable the Network interface eth0 at boot time by running:
[code
sudo ifconfig eth0 up
[/code]
Any ideas how to enable it at startup.
Here is my /etc/network/interfaces file
[Code]...
I'm using Debian Squeeze. Just noticed that my system time has slipped back an hour and I can't adjust it because even though I give the root password, the buttons remain inactive.I checked a few other apps that need root authorization and found that - System --> Administration --> Network behaves in the same way.
View 8 Replies View RelatedI use centos 5.3, the problem is my network is not starting when the machine is restarted everytime, i checked everything in the network scripts, and logs which is indicating dat everything is initialising at boot time, wat and wer will b the problem.
View 2 Replies View RelatedI am using openSUSE 11.2 and had the same issue once before in openSUSE 11.1 After some time, two domains I use very often can't be accessed any more, these are: Google and [URL]... (am doing some OO development recently). At the time where I write this post, only these two are "blocked".
When I try to access these two domains using Firefox, w3m or telnet, it tries to open the connection forever. Ping works fine. I tried opening the IP directly in the browser, but same problem, the connection never reaches. I know it's not a router issue, as the other computers can access these domains. Still, I tried to restart the router, but the issue persists. I tried restarting the network service (/etc/init.d/network stop + start), also nscd, without success. The only way I found to make it work again is to reboot. This problem reappears from time to time, after using the computer for a long time, and accessing these domains a lot of times. Note that I also use suspend to disk, so the "blocked" state is kept after resume. Only reboot "cures" it.
I was using openSUSE, then went to Mint. Before I had to tinker with all sorts of settings, and things to get wireless internet to work. Ubuntu just detected what drivers I needed & its simply got my wireless to work all on its' own.
Is 11.3 similar? I want to move back to openSUSE, but I don't want to tinker with this. I want to use my time on the computer for more productive things.
I'm trying to block a site for a certain time.How to Block(deny) perticuler website in certain times of the day , by using squid ? and it seemed promising.I added the lines to my squid.conf
acl office_time time MTWHF 3:00-21:00
acl bad url_regex "/etc/squid/block.acl
http_access deny bad !office_time
created a block.acl in the same directory and restarted it.
Firefox crashes each time I launch it under KDE. It does not crash under IceWM. Upstream Firefox binary does not crash, neither b13 nor RC1. GTK-QT Theme Engine is reported missing by GTK settings.
Name : MozillaFirefox Relocations: (not relocatable)
Version : 4.0b12 Vendor: openSUSE
Release : 1.2.1 Build Date: nie, 27 lut 2011, 15:19:51
Install Date: nie, 13 mar 2011, 21:29:21 Build Host: build21
[Code].....
First: I have just recently upgraded to 10.04 and I just noticed that my network icon in the top right tool bar disappeared. The one that monitors your wireless signal for laptops. How do I make that appear again?
Second question: How do I change the time selection at the beginning when I first turn on my laptop to choose between Windows or Ubuntu? Better yet, is it possible to make it infinite?
I didn't quite know how to describe my problem in the title. I installed Lucid i386 on my wife's PC two days ago. I updated all programs from the update manager. This PC uses a usb Wifi adapter for internet. When I boot the PC, the internet works. But after one or two hours, the networking capabilities disappear. In the network list in the panel there are NO networks listed, and the only way that I have been able to restore the ethernet is to restart the PC. What can I do to correct this?
View 3 Replies View RelatedWhenever I reboot my server, it looses all network connectivity. It can't see the LAN nor the internet. I have to issue the following:
Code:
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth1 up
This will get the server talking to the LAN, but still not to the internet. To get that I have to do:
Code:
route add default gw 192.168.0.1
Then I'm up and running.
But why?
Granted I only have to reboot now and then (after a power failure, or, like last night where the server was actually heating the house too much on a hot August day) but why is this happening? It is like these settings are temporary and are lost on shutdown.
There is 2 networks that I would like to be part of
a) Through my wlan0 --> Internet DSL
and
b) Through my eth0 --> WUG - PTAWUG
I can only get one of the networks to work at 'n time. The wlan0 works fine when I start my PC, but when I want to access the WUG I need to do the following command:
Code:
sudo route add -net 172.16.0.0 netmask 255.240.0.0 gw 172.24.6.177 dev eth0
with the above command, I can then access the WUG but not the internet through my wlan anymore.all data goes to my wlan as standard unless its on the 172.16.0.0 network
I have installed conky from soft manager after knowing its power today. I'm using 10.10. I want to design a conky script which monitor the network traffic ie total upload + download on monthly basis as I'm on limited internet plan which is too common here. I have free usage from 2am to 8am in the morning and want to exclude this traffic. So I'm in search of a custom script which can accomplish this.
View 1 Replies View RelatedFor some reason whenever I'm torrenting after a certain amount of time my networking ability just stops. My network traffic shoots down to zero and I can't bring anything like the ability to request a website back until I restart.
View 9 Replies View Related