I was using openSUSE, then went to Mint. Before I had to tinker with all sorts of settings, and things to get wireless internet to work. Ubuntu just detected what drivers I needed & its simply got my wireless to work all on its' own.
Is 11.3 similar? I want to move back to openSUSE, but I don't want to tinker with this. I want to use my time on the computer for more productive things.
Howto secure a productive opensuse workstation? Have you virus scanner, for example clamav and rootkit scanner like rkhunter installed on a produktive opensuse workstation in your company?
View 1 Replies View Relatedthe section where the wireless signal and sound control is?To the left of the time/date in this picture:
View 2 Replies View RelatedHow do I make imagemagick convert things one at a time? I know how to make imaggemagick convert all pages of a pdf into individual jpeg files by storing it all in the RAM at once but if there isn't enough RAM, this will use swap like crazy and be suuuuuuuper slow.
Here is the command for the "crazy swap-using" way:
convert --units PixelsPerInch -density 150x150 filename.pdf filename.jpg
I am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies View RelatedI install Opensuse 11.4 on KDE environment then I changed to XFCE. I don't know how to configure for computer auto shutdown after a period of time don't use it.
View 6 Replies View RelatedI have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies View Relatedive got a windows partition and a ubuntu-10.10 partition. i just tried to reinstall windows on the first one - but things didn't work out properly. after the first restart the pc just hung in the first boot screen - it wouldn't boot from the windows cd or the harddrive. every time i restart the computer it just hangs in that screen. i can't even choose to boot from cd/usb to use a livecd and rescue my files on the ubuntu partition. its like the keyboard doesn't work anymore. ive tried both a usb keyboard and one of the old kind with the prongs. so i cant get into ubuntu.
here's the screen, it pops up a second after i restart. usually the pc just boots up a couple seconds later and i can choose beteen win/unbuntu; or i can just press 'esc' and choose to boot from usb. but now nothing is happening, the keyboard doesn't seem to work, and it wont go passed this screen.*edit* actually the keyboard is working, because ctrl-alt-del restarts the computer, but thats about it..
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies View RelatedFor like windows you can resore your os to a state of peace kind of. If you messed up your vital files you could go back in time and restore you computer to a selected time. I was wondering if you could do that for ubuntu
View 4 Replies View RelatedMy computer has different time when booting to linux or Windows.How to make the time the same?My computer time is 10:57pm Apr 14 when booting to linux.My computer time is 2:57am Apr 14 when booting to Windows Vista Home Premimum SP2.Both OS are set to the same time zone (GMT-5. Eastern Time US & Canada).
View 5 Replies View RelatedI'm working through some problems in a beginners programming book. The author mentions a formula for calculating the number of ways of picking out n things from a collection of m of them:
Code:
/ m m!
| | = -----------
n / n! (m-n)!
But he does not give a name for the formula. Does anyone happen to know what it is called? I need to do some related research.
I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
There is a computer in a home running opensuse into which I would like to login.
As usual, the computer is connected wirelessly to the home's router. I cannot control the router in order to direct incoming connections, say, on sshd port, to that computer.
Is there a way to log into that computer from outside?
The computer is fully under my control, as distinct from the home router. I know all relevant IP addresses. I can start any service on the computer, or start any command, or ask somebody to start a command while I am not at home.
I'm new to RDP. When I tried to log in to my account on my own PC using RDP, this is what I saw.
xrdp-sesman output:
starting sesman in foregroud...
sesman config:
ListenAddress: 127.0.0.1
ListenPort: 3350
EnableUserWindowManager: 1
[Code]...
What am I doing wrong? I'm pretty sure I'm able to type in my password correctly. Also, how do I prevent people from logging in as root? That sounds dangerous.
I have been running a dual boot system with Windows XP plus SUSE Linux 11.2 since january 2010. Now (2011-03-06) I downloaded Ubuntu 10,4 LTS, produced an installation CD, booted Windows XP and invoked the Wubi to instal Ubuntu under Windows. The good news is that it works! However, I would prefer a different setup.
Currently, when my PC boots, I can choose from the GRUB menu either SUSE Linux or Windows. When I select Windows, I see another menu where I can choose between Windows and my new Ubuntu Linux. I would like to install Ubuntu Linux such that my initial GRUB menu offers the choice between the three systems. From a few articles in the Ubuntu forums I conclude that it should be possible to do so. Is there an instruction on how to do it? I chose a headline that expresses my question in more general terms,
I have host server for xen (11.2 x86_64) and another server holding linux images. Those images are accesible via NFS.
When I am installing new machine on my xen host and using images on nfs share; whole host-machine freeze during installation (random time, random packages, but it freeze everytime). I had to hard rebooted. Machine do not respond to ping. Performing same installaltion from local copy of same image (copy is done through NFS !) is always vithout any problem.
Xen host machine is MSI Wind and it have gb ethernet. I had some problem with it on Windows XP (disconecting) but on Windows Vista it was ok. On Linux I also did not encounter any problem so far.
Strange thing is that after hang there is no error in /var/log/messages. I would like to investigate what`s going on, what cause this freeze.
I am thing about sysrq messages, but this machine do not have any com port.
Here is output of lspci just for info
lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
[Code].....
I am using openSUSE 11.2 and had the same issue once before in openSUSE 11.1 After some time, two domains I use very often can't be accessed any more, these are: Google and [URL]... (am doing some OO development recently). At the time where I write this post, only these two are "blocked".
When I try to access these two domains using Firefox, w3m or telnet, it tries to open the connection forever. Ping works fine. I tried opening the IP directly in the browser, but same problem, the connection never reaches. I know it's not a router issue, as the other computers can access these domains. Still, I tried to restart the router, but the issue persists. I tried restarting the network service (/etc/init.d/network stop + start), also nscd, without success. The only way I found to make it work again is to reboot. This problem reappears from time to time, after using the computer for a long time, and accessing these domains a lot of times. Note that I also use suspend to disk, so the "blocked" state is kept after resume. Only reboot "cures" it.
I'm trying to block a site for a certain time.How to Block(deny) perticuler website in certain times of the day , by using squid ? and it seemed promising.I added the lines to my squid.conf
acl office_time time MTWHF 3:00-21:00
acl bad url_regex "/etc/squid/block.acl
http_access deny bad !office_time
created a block.acl in the same directory and restarted it.
Firefox crashes each time I launch it under KDE. It does not crash under IceWM. Upstream Firefox binary does not crash, neither b13 nor RC1. GTK-QT Theme Engine is reported missing by GTK settings.
Name : MozillaFirefox Relocations: (not relocatable)
Version : 4.0b12 Vendor: openSUSE
Release : 1.2.1 Build Date: nie, 27 lut 2011, 15:19:51
Install Date: nie, 13 mar 2011, 21:29:21 Build Host: build21
[Code].....
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
I just started with my linux opensuse. I always used windows, but i changed to linux. With windows you always could easily connect with command promp to a shared file on a other intern computer. How can i do this with opensuse?
View 3 Replies View RelatedIs there a good way to set up internet tracking on an openSUSE 11.3 computer? I don't want users visiting porn sites or any other nonsense, and if they do, I want to know about it. Is there a good program that the administrator can set up to report this kind of thing or at least track it? Obviously, this would need to track all websites visited regardless of the application/browser used, and would need to be completely inaccessible to users. I don't want them having the ability to turn it off or circumvent it somehow.
View 8 Replies View RelatedWhen browsing in WinXP Windows Explorer to view an OpenSUSE computer, the displayed name is:
Samba 3.5.4-5.3.1-2489-SUSE-SL11.3 (*hostname*)
Other Windows computers display as:
[computer description]([hostname])
How can I change the "computer description" within OpenSUSE?
unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedI went into Yast and disabled the SYSLOG service, ignoring the warning of which services would be affected, I went ahead anyway and stopped it. Sure enough, a handful of other services stopped as well.Now I have almost recovered the PC from this foolish mistake of mine, the only problem I seem to be stuck with is I am now unable to locate the computer on my LAN by hostname ... does anyone know which service I should restart please (if it helps, the computer can resolve DNS names such as Google.com OK)?
View 3 Replies View RelatedI dug up an old pentium 3 computer to play with. I have it connected to my laptop with an ethernet cable. Now, how do I access the files, install new OS, etc, etc? If it helps any, I think it runs windows 2000 and I'm on opensuse 11.3.
View 9 Replies View RelatedI am having some trouble with my opensuse 11.3 internet connection for two weeks. After a certain period connection drops while using both NetworkManager and ifup. For info, I write the outputs of some codes.
[Code]...
I'm using Opensuse 11.4 updated from 11.3, update from 11.2 updated from. I'm mounting at boot time (in fstab) some shares from an opensuse 11.2 server. Mounting worked fine in 11.2, 11.3 and also in 11.4 but suddenly (maybe an automatic update?) It stopped working.... sometimes.
Sometimes they are mounted properly but sometimes they aren't. When mount fails I get a log error: "rpc.statd is not runninf but is required for remote locking. Either use '-o nolock' to keep locks local or start statd"
If I run manually (as root) mount -a the shares mount properly always, so I thought it was a problem of timing (the service starting late) so I tried to get a script to run after the network initialitation, the script does: "mount -a". But it doesn't work either.
Let me start by saying that with the previous kernel 2.6.31.5 when I opened network configuration, it didnt even recognize my card when i'd go to modules. After I updated to 2.6.31.8 it didnt recognize it until I installed the ralink-firmware 1.1.3.5. After that I could configure it using rt2870sta setting in modules. But once I restarted it would freeze after a few seconds after I could see the desktop on startup. I reconfigured the card to be 'manually' powered, but now it just freezes when I click on the access point I want to connect to. When it freezes the caps lock and scroll lock start blinking and the only way to turn off is holding the power
View 2 Replies View Related