I am installing Ubuntu 11.04 dual boot along with Windows 7. But I am unable to see already installed windows partitions.
During installation it shows hard disk as a whole. Does failure of CMOS battery has something to do with this?
I've been using Ubuntu since 2009, but recently I had to reinstall Windows (and Ubuntu.)The problem is that ever since I reinstalled Windows the Ubuntu installation doesn't recognize the Windows partition. I've got a 500GB HDD, and the installation says there's 500GB of free space.Is there any way to make Ubuntu recognize the Windows partition while installing, or is the only solution reinstalling Windows?
View 6 Replies View Relatedi tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
I have installed windows xp (service pack 2) on my pc. later i formatted a partition (drive E and installed ubuntu linux 8.04. I have provided 2gb space for SWAP partition and remaining for root (/). I have done this manually. Installation was completed, and ubuntu asked me to reboot the system. I did so.
Now comes my problem.......I am getting some DHCP connection or some thing weird.......after that i am getting a message ......and with a message asking me to press any key.....the same thing is coming even after restarting the system....i am unable to see both windows and linux now!
I have windows machine and installed ubuntu in one of my partition, So i was able to select any of these OS's while booting the machine, But recently I've formatted Windows partition after this am unable to reach this ubuntu. i.e., While booting the machine no options are listing out it directly went to Windows OS.
View 3 Replies View RelatedI have a 6TB external eSata bay (Lacie BigQuadra). I made a GPT table with only one big ext4 partition. All was ok. I resized the ext4 partition and I created a 1TB NTFS partition. I can use it on Kubuntu but Windows 7 tell me the partition is not formated. When I go back to Kubuntu, parted tell me that the secondary GPT table is not at the end of the disk and tell me it's probably an other OS that thinks the disk is smaller that its real size. It seems Windows 7 thinks the disk size is 2 TB (and modify automaticaly the GPT table and create a secondary GPT table on the middle of the disk).
What can I do to make my NTFS partition visible in Windows 7? What can I do to prevent Windows 7 to move the secondary partition table on the middle of the disk and to modify the primary GPT table ?
gdisk informations
------------------
$ sudo gdisk -l /dev/sd
sda sda1 sda2 sda3 sdb sdb1 sdb2 sdb3 sdb5 sdb6 sdc sdd sdd1
[code]...
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I am using Ubuntu 10.04 and i want to install windows into another partition in order to play some games. I created a partition (GParted live) 80GB in ext2 and later i convert it to NTFS ( I didnt know what the ext2 was) after that i run the windows live cd but i occured an error that windows can not be installed in none of my partitions because my partitions are unrecognizable.I think that has to do with my file stystem.. but i convert in ntfs...
View 9 Replies View RelatedTwo days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I have an old linux partition (fedora 10) that used to start from the MBR. Now I've installed windows 7 on a new drive (overwritning the MBR, autostarting windows). Is there a neat program availible that somehow enables me to choose to boot back into linux?
View 2 Replies View RelatedI am unable to mount my Windows 7 partition. I receive the following error:
Error mounting: mount exited with exit code 1: helper failed with:
[mntent]: line 14 in /etc/fstab is bad
[mntent]: line 16 in /etc/fstab is bad
mount: can't find /dev/sda2 in /etc/fstab or /etc/mtab
I am dual booting XP and Kubuntu 10.10 from separate hard drives and I can't execute .exe files from my XP drive. I also have an internal data drive that I can execute .exe files from fine. When I try to go into the properties for the file to mark it executable I am unable to do so. I have ran "sudo nautilus" to mark the files executable and that doesn't work either. I even changed /dev/sdb1 to be owned by myself instead of root, and that doesn't help. When I used "sudo nautilus" I also got error messages in my terminal when I tried to do anything (which I copied and attached to this post).
View 3 Replies View RelatedDoes Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
1.After I install fedora14, I can not start window7,It shows only a transverse line shining .
2.when I comes into inux , execute "fdisk-l " ,it shows 'no invalid partition table' this two points have relationship?
Upon trying to boot Windows I got through the GRUB startup selections and then i get stuck at a black screen displaying "Starting Up. . ." That would be no problem, I just boot ubuntu instead and mount the partition to access the programs I'm looking for. Now I get an interesting error message:
"Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup: magic: 0x00150000 size: 4096 usa_ofs: 0 usa_count: 1040: Invalid argument Actual VCN (0x15000011d92501) of index buffer is different from expected VCN (0x1). Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details."
I would run chkdsk in windows if I could, but that's my problem in the first place.
I have partioned my harddrive when I installed ubuntu 10.10 Desktop edition, 32-bit. But, after I installed it I can no longer access the Windows partition. I have never played with Linux OS before. I will provide a screen-shot of the partition. [URL]
View 14 Replies View RelatedI am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
i was using win xp sp2. i just installed red hat linux by making one of the windows drive as unpartitioned space . i kept windows as my default os .my linux is working properly , but when i goes to start windows , it shows error " windows unable to start , hal.dll file is missing or corrupt".so to solve this problem , i decided to repair windows , but when i isert win xp bootable cd , cd starts booting , after showing messege " setup is inspecting your hard ware " , black screen appears , nd nothing happens after that.what should i do ? i want keep linux as it is and also want to start my windows again . tell me how to repair windows . what should i do to boot win xp bootable cd properly.
View 12 Replies View RelatedI installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
View 3 Replies View RelatedI have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
View 1 Replies View RelatedI have mounted window shared partition to my RHEL 5.4 server through following command
Quote:
But I'm unable to mount the same via fstab.172.20.x.x is my windows server download is my shared folder name.
Suggest me correct fstab entries
My current fstab entry is as follows
Quote:
I want to install ubuntu in another partition. I have C: which contains Windows 7 Ultimate and i have D: for files. D: was pre-configured with my desktop. I wonder how to install Ubuntu in D: .
View 1 Replies View RelatedI want to install Ubuntu on a 30 Gb partition. I attached the structure of hard drive under Win 7 and under Ubuntu instalation program. Why the 30 Gb partition in invisible under Ubuntu instalation program, and how could I install Ubuntu on it?
View 6 Replies View RelatedLast week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.