General :: Unable To Migrate Fedora 10 To Another Computer?
Feb 4, 2010
I've been running Fedora 10 in a computer with Asus motherboard,M2V, but I want to move the hard drive with Fedora 10 installed on to another computer with Asus motherboard,M2NPV. The reason I mention both motherboards by their name is because both of them are almost identical except for the boards.
When I try to boot Fedora 10 in the one with M2NPV, the boot process complains that it can't find the root file system.
The Fedora OS was installed on one hard drive with the following partitions:/boot partition LVM Volgroup partition swap partition.
It appears to me that the boot loader can't find /boot partition and thereby the initrd.img.
I tried to rebuild initrd.img, but the rescue disk could not find the installed OS.
View 6 Replies
ADVERTISEMENT
Feb 13, 2011
I want to do an apparently simple task but since I migrated to Opensuse I found no way to do it. I have an enhanced install of Opensuse 11.3, where I added softwares from different sources according to my needs. Now that it's working fine I would like to make the same kind of install for two friends of mine and for a virtual machine on Virtualbox. In Ubuntu I used remastersys and in few minutes it created a live DVD with all the content of my system, and all of this offline, without downloading anything else. In Opensuse the only resources that most resemble that are Kiwi and Suse Studio.
But it seems that in both the softwares must be downloaded from repositories online. That would not work for me because it would take a very long time to find out all the packages I installed, from what repositories and my internet connection is very slow so I could not do it all at once. I tried Clonezilla but I was not able to restore the content of my Opensuse partition to a different machine. It gave me error messages, didn't make the restore and I didn't find a solution anywhere online. How can I transfer the content of my Opensuse installation to another computer without having to use online resources?
View 9 Replies
View Related
Oct 4, 2010
I want to change my partition configuration, and migrate my install to a drive I haven't used in a while.I've followed the steps which I have seen in several locations, but for some reason I can't boot into it (hopefully it's something simple )Here's what I've done so far:Deleted all of the partitions on the drivecreated a new EXT4 and swap partition on the drive (and others that are currently unused)mounted the new drive, and rsynced the old drive with this command:
Code:
sudo rsync -va --exclude=/media --exclude=/proc --exclude=/lost+found --exclude=/mnt --exclude=/sys --progress / /media/ubuntu
[code]....
View 4 Replies
View Related
Jan 13, 2010
I have just had an auto-update, and the process has stopped with the warning above. The full error message is given below. I had already had problems (not sure if they're somehow resolved or related to this) with updating [URL]. Tests have determined that problems in the boot system exist which prevent migration to dependency-based boot sequencing:
package virtualbox-ose removed but not purged, insserv: warning: script 'K20acpi-support' missing LSB tags and overrides, insserv: warning: script 'usplash' missing LSB tags and overrides, insserv: warning: script 'hwclock-save' missing LSB tags and overrides, insserv: warning: script 'acpid' missing LSB tags and overrides, insserv: warning: script 'gdm' missing LSB tags and overrides, insserv: warning: script 'failsafe-x' missing LSB tags and overrides, insserv: warning: script 'acpi-support' missing LSB tags and overrides, insserv: warning: script 'udevmonitor' missing LSB tags and overrides, insserv: warning: script 'hwclock' missing LSB tags and overrides, insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides, insserv: script virtualbox-ose: service vboxdrv already provided!, insserv: script virtualbox-ose: service virtualbox-ose already provided!, insserv: warning: script 'dmesg' missing LSB tags and overrides, insserv: warning: script 'procps' missing LSB tags and overrides, insserv: warning: script 'atd' missing LSB tags and overrides, insserv: warning: script 'avahi-daemon' missing LSB tags and overrides, insserv: warning: script 'udevtrigger' missing LSB tags and overrides, insserv: warning: script 'apport' missing LSB tags and overrides, insserv: warning: script 'udev' missing LSB tags and overrides, insserv: warning: script 'ufw' missing LSB tags and overrides, insserv: warning: script 'rsyslog' missing LSB tags and overrides, insserv: warning: script 'anacron' missing LSB tags and overrides, insserv: warning: script 'network-manager' missing LSB tags and overrides, insserv: warning: script 'dbus' missing LSB tags and overrides, insserv: warning: script 'udev-finish' missing LSB tags and overrides, insserv: warning: script 'module-init-tools' missing LSB tags and overrides, insserv: warning: script 'hal' missing LSB tags and overrides, insserv: warning: script 'cron' missing LSB tags and overrides,
To reattempt the migration process after the problems have been fixed, run "dpkg-reconfigure sysv-rc".
View 4 Replies
View Related
Oct 25, 2010
Done a fresh install of Fedora 13 - it's the only os on the computer. Everything appeared to go well, but I'm unable to restart the computer. It gets to a point where it says restarting and just hangs there. Had a bit of a search through the forums and I see this was a problem for some people with earlier versions but haven't seen much mention past Fedora 10, and there doesn't seem to be a universal fix that's worked for everyone so not sure what I should be doing. There was some mention of the problem being related to nvidia drivers, but my video card is an ATI 4850 so that seems to rule that out as a possible cause. I've had several years using Linux (mostly Ubuntu and openSUSE) but hardly any experience with Fedora.
View 1 Replies
View Related
Apr 1, 2010
I recently updated my software (on Fedora 13) and after the updates had finished installing, it said that the computer required a restart. I noticed that I could no longer type anything into the search bar on Firefox without an error message appearing. So I thought it best to restart the computer then. When restarting, the loading screens took much longer than usual. The guitar pick shape that fills with white was stalling around the top. (I know, I love my complete comprehension of the problem too.) I pressed escape, and was given this message on a black screen.
Welcome to Fedora
Press 'I' to enter interactive startup.
starting udev:udevd-work[517]: '/sbin/modprobe-b pci: v000014E4d0000170Csv00001028sd000001F1bc02sc00i00' unexpected exit with status 0x0009
[OK]
[OK]
setting hostname (my computers name):
This is as far as I can get. I press Esc again, and I see the completed fedora logo, but nothing else happens. I press Esc again, and I come back to the previous screen, and this time there are two of the above messages. My computer is fairly old (four years), so I understand if the hard drive is deteriorating. I would like to have use of my computer back, but at the very least I would like to recover some files that I have not backed up.
View 3 Replies
View Related
Jun 11, 2011
I cant get cups to open on my computer http://localhost:631/ wont open for me either.
View 2 Replies
View Related
Feb 17, 2010
I remember a friend of mine was able to get my computer to boot under CUI, and the command 'start x' started the GUI. with booting up my computer through CUI.
View 3 Replies
View Related
Jun 11, 2009
Is there any means of converting a VMware VM into a KVM VM? If there is no direct way is there a KVM tool that will convert a running system into a KVM VM like VMware has? If that exists it would be possible to run it on a VMware VM to produce a KVM VM?
View 14 Replies
View Related
Jul 24, 2010
I have Fedora on SATA HDD 80Gb.Now I want to move all partitions to the 500Gb one.Some of partitions will remain the same size, some will increase. I tried that with Paragon Hard Disk Manager,but after it was done I found a problem, that they can't pass fsck checkup.It says something about cross linked files and on the root partition it failed at all with warning something about bad superblock.what is the easiest way to move to the big HDD? What soft should I use? Maybe it's sufficient to boot from CD, create new partitions and copy all files from source partitions to destination ones?
View 3 Replies
View Related
Mar 1, 2011
I have created some new weblogic domains in linux machines and I migrated the related scripts. All works ok but the following.
In stop script it seems that after the execution reaches the following command (which performs the actual shutdown of the server) the script lets say that it pauses(?) its execution. The server is actually stopped, but I found that to continue to execution of the script I need to hit Ctrl+C or Enter. I seems that some sort of user interaction is required.
The command is the following:
Code: ${JAVA_HOME}/bin/java -cp ${CLASSPATH} weblogic.Admin FORCESHUTDOWN -url ${URL} ${UIDPWD} ${SERVER_NAME} 2>&1 I am positive that all parameters are defined correctly. After all the script works. The only thing that comes to mind is the 2>&1 for redirection of the output. Could this need different syntax?
View 1 Replies
View Related
Nov 17, 2010
I have used Ubuntu for 4 years. I'm thinking of trying Fedora. I have a 1TG HD with three partitions(/,/ home, swap).Any suggestions about how to migrate? Do I clean /home of programs files? Just my personal files? Etc.
View 4 Replies
View Related
Apr 12, 2010
I have Win XP SP2 installed on my machine. I wanted to try Ubuntu and i created a CD an and wanted to install the OS. The CD booted and i selected the option of "using The OS together and selecting which one to boot" or something similar to that. Ubuntu and changed MBR and installed itself. However on restarting I am getting Error 18. Now i am unable to use my computer at all.
In recover my XP at the moment and how to install Linux so that it does not mess around with any other OS?
View 5 Replies
View Related
Jul 11, 2011
I am relatively new to Fedora 15, but used 13 for a while with no issues. Yesterday a windows user put a flash drive into my computer for me to copy something on to. (This may be conincidental.) I then put the computer into suspend or hibernate or whatever and now it won't start up. At all. And I'm stuck as 'everything' I need is on that computer.
View 1 Replies
View Related
Jul 11, 2009
I have a working system running some older fedora, and new hardware running a fresh, new fedora install. I want to basically transfer my computer's "soul" into the new system ( user's stuff, firewall configuration, the various server & security configurations, etc.) and basically any customizations and non-hardware related packages installed that weren't part of the standard fedora install process. I'm looking for a magical easy button I can push to do all this (pause for laughter). Essentially, I want to "upgrade", but starting with a clean install on a different computer with different hardware. I have a vague idea of what needs to happen, like copying the /etc/*.conf files, /home directory, etc. but this seems very tedious, and the likelihood of me forgetting or overlooking something is 100%, and copying over entire disks or partitions wholesale is not necessary, and does not work for this scenario. I need to place/merge just the right files/directories in just the right places with surgical precision. Is there a utility for this? Maybe a way to diff the packages of the 2 computers and install the difference? Or at the very least some sort of checklist that could be scripted for my system? I'm desperately trying to avoid the pain, human misery & suffering encountered getting everything in the 1st system going.
View 3 Replies
View Related
Mar 29, 2011
Can we migrate to make version 3.81 in Fedora 14? make 3.82 is made available in make Fedora 14 which has compatibility issues with make files of 3.81 version.
View 3 Replies
View Related
Mar 31, 2011
I have a 389-ds with a large user base. All passwords are stored plaintext. I would like to convert all these stored passwords to a hash, say SHA-1.
View 2 Replies
View Related
Feb 2, 2009
i am planning on installing virtualbox on a fedora 9 machine and would like to know if it is possible to migrate another fedora 9 (totally seperate) machine to a virtualbox as a guest OS.
View 1 Replies
View Related
Sep 29, 2010
Ubuntu 10.04 64 bit I ran following command to change username; # usermod -c "Real name" -l new_username old_username but forgot adding -m option to move the contents of the old home directory to the new home directory. Therefore; # ls /home old_user_directory
View 4 Replies
View Related
Apr 21, 2010
I found 2 previous posts, one from 2005 and one from 2006. The 2005 post was not very helpful and the 2006 threads are not exactly what I was expecting. So I wanted to ask the question to be sure. I have already stood up the new fedora 12 server. The old server is also fedora 12. I need to migrate local users and sendmail mailboxes. In the past couple of years the environment was small enough to create a copy of the users and then have the users mail themselves, but I want to start migrating users/mailboxes properly.
On a unix level I am a jr admin, but I have extensive senior level experience as a windows engineer and network engineer. I do feel comfortable with using the unix command line, but usually operate the unix systems thru webmin because I am not familular with more complex commands. Ideally a software solution to migrate users and/or mailboxes from one server to another is what I am looking for, but in leiu of a software solution I still need to migrate user accounts and their mailboxes. LDAP is not in place, but if the process becomes easier with LDAP I am willing to do what is needed to set up LDAP. (I have no previous experience setting up LDAP)
I do not want to change my mail server from sendmail to different software. At least right now. Both systems are up and running. They can connect to each other via public ipv4 address' only. The new server has already been installed and configured with all the software to match the old server. How do I migrate users and sendmail mailboxes from one fedora 12 server to another fedora 12 server?
View 3 Replies
View Related
Mar 7, 2011
I am trying to migrate my existing system with one IDE disk , tools installation already done... without loosing informations and having to install once again every things, to RAID1 (soft) with a second IDE disk I tried to do this using somme informations given on forums but i always have a kernel Panic at the end of boot What I did:
The system is going down for system halt NOW!
login as: root
root's password:
/usr/bin/xauth: creating new authority file /root/.Xauthority
[code]....
View 8 Replies
View Related
Feb 19, 2011
I have an ext2 formatted disk (linux) and I need to reformat it to NTFS (windows). Problem is, I have to retain the 750 GB of data that's on the disk. What's the quickest (least number of steps) way to accomplish this? I do have a spare 1TB disk now to help with the transfer.
Background.I've been using XBMC Live for a couple of years, but with all the problems I've been having lately, I'm moving over to the Windows version. Unfortunately all of my media is stored on an ext2 formatted disk (not the same disk as the OS disk).I was thinking of loading up an Ubuntu live disk, and installing ntfs-config. Mount my secondary disk (already formatted NTFS), transfer the files, reformat the original drive, load windows and transfer the files back.
View 3 Replies
View Related
Jun 20, 2011
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
View 3 Replies
View Related
Jan 5, 2010
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies
View Related
Jun 17, 2011
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
View 1 Replies
View Related
Apr 17, 2009
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
View 3 Replies
View Related
Apr 3, 2010
It's happened twice. I've come back to my computer after a couple of hours and the screen is black, but it responds to nothing, so I just power it off.
View 1 Replies
View Related
Jan 17, 2010
I'm trying to connect my fedora core pc to my windows 7 network.
View 4 Replies
View Related
Jun 29, 2011
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies
View Related
Jun 28, 2011
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies
View Related
