Ubuntu :: Unable To Migrate To New Partition?
Oct 4, 2010
I want to change my partition configuration, and migrate my install to a drive I haven't used in a while.I've followed the steps which I have seen in several locations, but for some reason I can't boot into it (hopefully it's something simple )Here's what I've done so far:Deleted all of the partitions on the drivecreated a new EXT4 and swap partition on the drive (and others that are currently unused)mounted the new drive, and rsynced the old drive with this command:
Code:
sudo rsync -va --exclude=/media --exclude=/proc --exclude=/lost+found --exclude=/mnt --exclude=/sys --progress / /media/ubuntu
[code]....
View 4 Replies
ADVERTISEMENT
Aug 11, 2010
It's me again, I wish to be a little more organized. I incidentally installed Ubuntu on the same partition as my main Windows 7.
Is there a possible way to "migrate" this Ubuntu OS to another partition, keeping all of the settings. Also, would "migrating" the OS interfere with GRUB2?
View 9 Replies
View Related
Feb 25, 2011
I'm running Ubuntu 10.10
I have been running a dual boot system for a while now and I haven't logged onto the Windows side for quite a while. I'm ready to whack it.
What I want to do is get rid of sda1, sda2, sda3 partitions(all Windows related) - migrate my Linux install(sda5) to a Primary partition, migrate the swap out of the extended partition, and then make everything else my "data"(ext4) partition...so basically go to 2 primary partitions and a swap.
I know how to ultimately get to my one big "data" partition, but the part I'm not so sure or comfortable with is whacking the current Primary partitions and migrating the Ubuntu install to the new primary partition.
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 de Dell Utility
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 13 1926 15360000 7 HPFS/NTFS
[Code]....
View 5 Replies
View Related
Feb 4, 2010
I've been running Fedora 10 in a computer with Asus motherboard,M2V, but I want to move the hard drive with Fedora 10 installed on to another computer with Asus motherboard,M2NPV. The reason I mention both motherboards by their name is because both of them are almost identical except for the boards.
When I try to boot Fedora 10 in the one with M2NPV, the boot process complains that it can't find the root file system.
The Fedora OS was installed on one hard drive with the following partitions:/boot partition LVM Volgroup partition swap partition.
It appears to me that the boot loader can't find /boot partition and thereby the initrd.img.
I tried to rebuild initrd.img, but the rescue disk could not find the installed OS.
View 6 Replies
View Related
Jan 13, 2010
I have just had an auto-update, and the process has stopped with the warning above. The full error message is given below. I had already had problems (not sure if they're somehow resolved or related to this) with updating [URL]. Tests have determined that problems in the boot system exist which prevent migration to dependency-based boot sequencing:
package virtualbox-ose removed but not purged, insserv: warning: script 'K20acpi-support' missing LSB tags and overrides, insserv: warning: script 'usplash' missing LSB tags and overrides, insserv: warning: script 'hwclock-save' missing LSB tags and overrides, insserv: warning: script 'acpid' missing LSB tags and overrides, insserv: warning: script 'gdm' missing LSB tags and overrides, insserv: warning: script 'failsafe-x' missing LSB tags and overrides, insserv: warning: script 'acpi-support' missing LSB tags and overrides, insserv: warning: script 'udevmonitor' missing LSB tags and overrides, insserv: warning: script 'hwclock' missing LSB tags and overrides, insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides, insserv: script virtualbox-ose: service vboxdrv already provided!, insserv: script virtualbox-ose: service virtualbox-ose already provided!, insserv: warning: script 'dmesg' missing LSB tags and overrides, insserv: warning: script 'procps' missing LSB tags and overrides, insserv: warning: script 'atd' missing LSB tags and overrides, insserv: warning: script 'avahi-daemon' missing LSB tags and overrides, insserv: warning: script 'udevtrigger' missing LSB tags and overrides, insserv: warning: script 'apport' missing LSB tags and overrides, insserv: warning: script 'udev' missing LSB tags and overrides, insserv: warning: script 'ufw' missing LSB tags and overrides, insserv: warning: script 'rsyslog' missing LSB tags and overrides, insserv: warning: script 'anacron' missing LSB tags and overrides, insserv: warning: script 'network-manager' missing LSB tags and overrides, insserv: warning: script 'dbus' missing LSB tags and overrides, insserv: warning: script 'udev-finish' missing LSB tags and overrides, insserv: warning: script 'module-init-tools' missing LSB tags and overrides, insserv: warning: script 'hal' missing LSB tags and overrides, insserv: warning: script 'cron' missing LSB tags and overrides,
To reattempt the migration process after the problems have been fixed, run "dpkg-reconfigure sysv-rc".
View 4 Replies
View Related
May 29, 2011
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
View 9 Replies
View Related
Apr 8, 2010
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
View 6 Replies
View Related
Dec 19, 2010
I'm running Ubuntu 10.10 x64 and have been using an encrypted ext3 setup (created with the alternative installer CD) ever since Hardy or so. Is it possible to migrate my partitions to ext4 without formatting/reinstalling ?
View 1 Replies
View Related
Nov 17, 2010
I have used Ubuntu for 4 years. I'm thinking of trying Fedora. I have a 1TG HD with three partitions(/,/ home, swap).Any suggestions about how to migrate? Do I clean /home of programs files? Just my personal files? Etc.
View 4 Replies
View Related
Jan 23, 2010
I was not sure if Desktop meant 'Desktop vs Server', or Desktop as in relation to Windows Managers.
I want to move a domain from one web host to another. I also want to preserve my email. Does anyone have a recommendation for software which will allow me to:
(1) Copy current web host email locally
(2) Switch web hosts
(3) Populate new web host with local copy
I've looked at imapcopy and imapsync. Unfortunately, both want Server -> Server. I briefly looked at setting up a local IMAP server (dovecot-imap), but it is clear that this is more ISP-grade. I did not see a quick example of user management in [URL], and I don't really want to spend days working on the configuration.
Any recommendations for software that allows me to 'backup' and 'restore' to/from a local file store?
View 5 Replies
View Related
Jun 2, 2010
I'm moving a user from an old 8.x Xubuntu install to a different machine with 10.04 installed. I want to migrate all the user's files and settings to the new machine. I see Ubuntu has a migration assistant, but the limited documentation I've found on it talks about using for in-place upgrades from older/other OSes.
Ideally, something like this would work like the Apple Migration Assistant or Windows Easy Transfer. If so, how do I access this? Anyone have a tutorial? If not, can someone point me to instructions to move the proper folders, create the user, assign permissions, etc.?
View 3 Replies
View Related
Jun 3, 2010
I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
View 6 Replies
View Related
Jun 9, 2011
I'm about to migrate from a single 1TB drive on my Mythbuntu system to a two-disk setup with a 500GB drive for boot, root, home, etc. and the entire 1TB drive reserved for MythTV and shared videos.
In addition to being on a different hard drive than now, the partition numbers are somewhat wonky currently; I originally dual-booted Windows on sda1, which will no longer be the case. sda2 is the current myth partition and is the back half of the drive for some reason I won't go into here. Partitions 3 through 7 work all right now as root, swap, home, and space reserved for a virtual machine, but I'd like them to be 1 through whatever just for keeping me sane.
Is there a good way to do this? I was going to use remastersys to install my current install there, but I'm not certain all the data I need for a seamless install will fit on the 4 GB jump drive I have. I can mount the old partitions and copy some stuff over afterwards, but it would be nice if there were a way to just dump it on and have it mostly work. I've had to jump through some hoops to get it working the way it is now (which is quite well) and I'd like to avoid doing that again. Plus, with MythTV, there's a lot of setup involved after installation which I'd like to avoid since it's correct now.
If there is a good way to clone the partitions to the new drive, a big thing would be that the boot sector has to come over too, or can be rebuilt without needing an install. I've had a situation where that didn't happen, and the result was a lot of wasted time and effort.
View 8 Replies
View Related
Jan 20, 2010
I'm trying to migrate my emails and (at least) account settings from Thunderbird 2 that is installed on my main machine here, and move them to another Windows-based installation of Thunderbird.
I tried searching here and Mozilla.org, but can find no answer. Since the source Thunderbird installation is the one installed on my Ubuntu machine, I thought I'd start here. (plus, I get better answers here)
View 2 Replies
View Related
Mar 4, 2010
How do I migrate a system from one machine to another. By this I mean install a new system on a new machine then have a copy of all the settings etc from the old one copied to the new one.
View 5 Replies
View Related
Apr 1, 2010
I'm just trying to migrate to Ubuntu 10 Beta from Gentoo. One option in the installer intrigued me. It said something like (from memory) "Use password to log in and decrypt my home directory".
What happens behind the scenes when I choose this? (How) can I enable this later on? (I didn't activate it because I wanted to migrate my Gentoo user's home as painless as possible.)
View 1 Replies
View Related
Sep 29, 2010
Ubuntu 10.04 64 bit
I ran following command to change username;
# usermod -c "Real name" -l new_username old_username
but forgot adding -m option to move the contents of the old home directory to the new home directory.
Therefore;
# ls /home
old_user_directory
how to fix it. /home is on partition /dev/sda3 NOT on root directory
View 7 Replies
View Related
Apr 16, 2011
I am currently running 10.10 Merekat as 11.04 will use the horrid unity enviroment i am looking into ways to have the next version work how iI want not how cannonical want therefore i ask the following What is the best way to 'migrate' to 11.04 xubuntu from 10.10 ubuntu? Is it just a case of re-pointing the repo's towards xubuntu.org & then removing Gnome?
I know this is probably an odd question but i seriously cannot live with unity as my desktop & just do not want it installed even if i wont use it! If this change is too big then i may move away from ubuntu altogether but as i have used it since warty warthog i am obviously reluctant
View 9 Replies
View Related
Jun 23, 2011
How do I migrate my user list to a new server installation? I thought that just copying /etc/passwd and /etc/shadow would be enough. I recently tried upgrading a lightweight bazaar server to 11.04, and the upgrade crashed. I had to perform a new installation of Ubuntu to recover operation of the system. I installed on a different hard drive. I had a dozen other people with user logins, so that they can get or modify bazaar repositories.
The new installation is running, and I can read all of the files on my old system's / drive. I tried copying the /etc/passwd and /etc/shadow files onto my new /etc -- but that did not seem to work. (When I looked using the System->Administration->Users-and-Groups GUI tool, there were no users visible, so I restored the old files.) What I intended to do was to clone the /etc and /home trees over to the new system. What am I missing?
View 1 Replies
View Related
Jul 7, 2011
Since it has been announced that 11.10 will likely ship with thunderbird instead of evolution, I now am wondering how i am going to migrate my mail spool to the new application.
Is there a migration/import utility to transfer mail/contact/settings from evolution to thunderbird?
View 4 Replies
View Related
Aug 13, 2011
I currently use Xubuntu on a dual boot system, a laptop. The hard drive is to small (30 GB shared between Xubuntu and windows), so I want to clone the existing drive, but I do not want to clone windows.
I bought a 120 GB hard drive, and want to dump windows totally. If I download clonezilla and burn it to a cd, can I instruct it to only clone the Xubuntu system? I think I would run clonezilla from a cd, download everything to my USB drive, then remove the small hard drive. Then, install the bigger drive and restore everything to the newer and larger drive. Will this work??
View 2 Replies
View Related
Jun 7, 2010
Is there any point of installing Samba when dual booting between ubuntu and Windows XP? I'm able to access my XP partition from Ubuntu with no problems and share files with no problem. Unfortunately it doesn't work the other way. When I'm in my XP partition I'm not able to access my Ubuntu partition. Is there another problem I have or something else I need to do?
View 6 Replies
View Related
Jun 2, 2011
i need to get rid of Ubuntu from my laptop but will be putting it back on my main computer. I've followed guides and it showed that you go into computer management and right click on the Ubuntu partition and delete it, but i can't do this. This is what my screen looks like -
[URL]
When i right click the first partition, all it comes up with is 'Help' and not delete.
View 1 Replies
View Related
Aug 6, 2011
I recently installed ubuntu 11.04. After installation, I created two ext4 partitions in my hard drive. My problem is that I can't create any files in these partitions. These partitions are not automatically mounted at boot time, but once I try to access them , they get mounted. I thought all this was managed by /etc/fstab file but I can't see any entry for these partitions there. So, I created an entry for both these partitions in fstab file with the following options: auto,user,exec,rw,suid,dev However, now when i boot, i see that there are two partitions already mounted as earlier and there are two more in the Places menu. I am not able to mount them since they are already mounted. And I still can't create any files in those partitions.
View 6 Replies
View Related
Jun 11, 2009
Is there any means of converting a VMware VM into a KVM VM? If there is no direct way is there a KVM tool that will convert a running system into a KVM VM like VMware has? If that exists it would be possible to run it on a VMware VM to produce a KVM VM?
View 14 Replies
View Related
Jul 24, 2010
I have Fedora on SATA HDD 80Gb.Now I want to move all partitions to the 500Gb one.Some of partitions will remain the same size, some will increase. I tried that with Paragon Hard Disk Manager,but after it was done I found a problem, that they can't pass fsck checkup.It says something about cross linked files and on the root partition it failed at all with warning something about bad superblock.what is the easiest way to move to the big HDD? What soft should I use? Maybe it's sufficient to boot from CD, create new partitions and copy all files from source partitions to destination ones?
View 3 Replies
View Related
Jul 20, 2010
I am using openSUSE 11.2 on my work computer and I wanna migrate to openSUSE 11.3. My concern is the fact that I have some "must have applications" that I had a lot of problems with them at installation on 11.2. Is there any possibility to create something like a restore point and if these applications are not functioning to come back to 11.2?
View 7 Replies
View Related
Mar 1, 2011
I have created some new weblogic domains in linux machines and I migrated the related scripts. All works ok but the following.
In stop script it seems that after the execution reaches the following command (which performs the actual shutdown of the server) the script lets say that it pauses(?) its execution. The server is actually stopped, but I found that to continue to execution of the script I need to hit Ctrl+C or Enter. I seems that some sort of user interaction is required.
The command is the following:
Code: ${JAVA_HOME}/bin/java -cp ${CLASSPATH} weblogic.Admin FORCESHUTDOWN -url ${URL} ${UIDPWD} ${SERVER_NAME} 2>&1 I am positive that all parameters are defined correctly. After all the script works. The only thing that comes to mind is the 2>&1 for redirection of the output. Could this need different syntax?
View 1 Replies
View Related
Nov 3, 2009
Our hardware that is running DNS is very old (Pentium 1 Redhat release 6.2), and I want to migrate the DNS Records to a new computer (Pentium 4 Debian Lenny). There is no GUI environment on the old server: no Gnome or KDE. I may consider using VMware Workstation for this project.
1. I don't have very much DNS experience. Is this a painless process?
2. Are there commands that I can run to export the DNS records from the old server?
3. Are there commands that I can run to import the DNS records to the new server?
4. What other advice do you have that could help this process?
View 2 Replies
View Related
Apr 22, 2010
I have a sed script to search and replace a pattern on the next kind of text:
Code:
C/username/Mydocuments/games & music
C/username/Mydocuments/New files 09-17-2007
C/username/settings
The script is:
code....
View 9 Replies
View Related
