General :: Unable To Get CUPS To Open On Computer
Jun 11, 2011I cant get cups to open on my computer http://localhost:631/ wont open for me either.
View 2 Replies
ADVERTISEMENT
Debian :: Cups Not Starting With The Server / Getting Error Unable To Read Configuration File '/etc/cups/cupsd.conf' - Exiting?
Feb 24, 2011cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
General :: Unable To Print Using CUPS In Fedora 12?
Mar 31, 2010Im trying to set up a print server using Fedora 12 and CUPS.
It recognized the printer, and i can print from the linux box. When i try to install it on my Win 7 64-bit box i can install the printer itself by giving it the IP address and port number of the linux box but i cant sent anything to it to print. I apologize im a little rough on the details, im not at home right now. I believe the printer i have is a HP PSC 1500. I opened the cups port on the linux firewall, and i shared the printer through the cups admin browser page.
Ubuntu :: Open Cups-pdf Output In Pdf Reader Automatically?
Jan 15, 2010I've got cups-pdf installed and working fine to print to PDF.
What I find kind of annoying is that it prints silently to ~/PDF with an automatic filename and with no feedback when it is done printing. So I have to monitor that directory manually for when a new file shows up.
What I'd like to have when I print to PDF is the output of cups-pdf piped to a pdf reader (like okular, in my case) which would open automatically when the printing is done so I can review the results and save or discard them.
I've looked through the options and tried to find documentation on cups-pdf, but I haven't found a way to make this happen yet.
Networking :: Can Not Ping 127.0.0.1 On Slackware / Cant Open The Settings For CUPS?
Jul 25, 2010When I run:
# Ping 127.0.0.1
Returns nothing. As if expecting an answer that never comes. Then press Ctr + C and returns:
--- 127.0.0.1 ping statistics ---
117 Transmitted packets, 0 received, 100% packet loss, time 116009ms
I use 3g modem connection configured with the command:
# pppsetup
The internet connection is normal. But without the ping localhost also can not open the settings for CUPS.
Here is my /etc/resolv.conf (if it helps in something):
google.com search
nameserver 8.8.8.8
nameserver 8.8.4.
code....
Ubuntu :: Sporadic With The Openoffice.org Program - Can't Open Any Open Office Programs Without Rebooting Computer
Jan 28, 2011I'm having sporadic issues with the openoffice.org program. Sometimes, power point presentations will crash the program and then I can't open any open office programs without rebooting the computer. The problem seems to be just with powerpoint files and I'm not sure what the issue could be.
View 7 Replies View RelatedGeneral :: Unable To Migrate Fedora 10 To Another Computer?
Feb 4, 2010I've been running Fedora 10 in a computer with Asus motherboard,M2V, but I want to move the hard drive with Fedora 10 installed on to another computer with Asus motherboard,M2NPV. The reason I mention both motherboards by their name is because both of them are almost identical except for the boards.
When I try to boot Fedora 10 in the one with M2NPV, the boot process complains that it can't find the root file system.
The Fedora OS was installed on one hard drive with the following partitions:/boot partition LVM Volgroup partition swap partition.
It appears to me that the boot loader can't find /boot partition and thereby the initrd.img.
I tried to rebuild initrd.img, but the rescue disk could not find the installed OS.
Debian Hardware :: Unable To Print With CUPS
Apr 9, 2015I am currently attempting to attach my printer to my fresh Debian installation and get CUPS running with it. I was able to add the printer easily enough, but when I try and print a test page from the web interface, it fails, and I see the following in the log.
Code: Select allD [08/Apr/2015:21:31:45 -0700] [Job 6] PPD uses qualifier 'Gray.OFF.600dpi'
D [08/Apr/2015:21:31:45 -0700] [Job 6] Calling FindDeviceById(Samsung_ML-1710)
D [08/Apr/2015:21:31:45 -0700] [Job 6] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [08/Apr/2015:21:31:45 -0700] [Job 6] Failed to get profile filename!
[Code] .....
General :: On Restarting - Grub Error 18 - Unable To Use My Computer ?
Apr 12, 2010I have Win XP SP2 installed on my machine. I wanted to try Ubuntu and i created a CD an and wanted to install the OS. The CD booted and i selected the option of "using The OS together and selecting which one to boot" or something similar to that. Ubuntu and changed MBR and installed itself. However on restarting I am getting Error 18. Now i am unable to use my computer at all.
In recover my XP at the moment and how to install Linux so that it does not mess around with any other OS?
Debian :: Unable To Check Status Of A Cups Printer?
Oct 15, 2010I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well. To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
Now, i wish to write a bash script that wil test the status of the printer. So that,if the printer is disable, it just execute the "move" script. Is there a way to know the status of a cups printer and use that information in a script?
For example, a command/function that can return "O" is the cups printer is enable and "1" if not.
Server :: Unable To Connect To CUPS - Connection Refused
Mar 16, 2010When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
General :: Unable To Open Program ?
Mar 9, 2011I work for a food manufacturing company in Sheffield and we have a machine called a duck injector which operates off a Human Machine Interface Touch Screen. The program inside this has been written and runs using Linux. This is stored on a Compact Flash Card.
This screen has been damaged and isn't made anymore so we've been sent a new screen which is a 12'1" Intel Atom N270 HMI.
I simply tried to put the Flash Card in the port and powered it up (booting from a removable source) and i get the following:
I've had absolutely zero experience with Linux so i'm completely stuck as to what to do to get it to work.
I've got a flash card with XP on it so i can boot up in that but then it won't read the flash card with the program on because it's in Linux (presumably?)
I've also tried downloading Mubuntu 10.10 and booted it up using that on a flashdrive - this allows me to read the flash card with the program but i can't get it to boot up/run.
Debian Hardware :: Unable To Set Up CUPS / HPLIP And Network Printers
Jan 12, 2012I'm having a devil of a time trying to set up printing with 3 network printers: an HP Laserjet P4014n, an HP Laserjet 5200tn, and an HP Officejet Pro 8500 a909a. The three printers are connected directly to the office intranet and have their own ip addresses. The system I'm trying to configure is running Wheezy, and HPLIP and Cups are both installed. I have confirmed (from [URL] ....) that all printers are supported.
First, running "hp-setup -i" (hplip-gui is not installed -- I do not wish to pull in half of KDE simply to configure printing), the program only finds the 2 laserjets. Adding one of them creates a printer in CUPS with an "hp:/net/<printer name>" connection. Attempting to printing a test page through CUPS fails with message "/usr/lib/cups/backend/hp failed".
Interestingly enough, running "hp-probe -bnet" finds all three printers. However, running "hp-makeuri" with each printer's ip address fails with "error: Device not found". Hmmm, so HPLIP can apparently go from seeing everything to seeing nothing. Very useful.
Moving to the CUPs browser interface, clicking "Find New Printers" under the "Administration" tab also only shows the 2 laserjets, although each is listed three times(!). The only difference that I can see among the three versions of each printer is in the connection uri:
dnssd://<printer name>._printer._tcp.local/
dnssd://<printer name>._pdl-datastream._tcp.local/
dnssd://<printer name>._ipp._tcp.local/
Adding any one of them seems to work, although I do not understand why there are three of them (presumably different protocols, though what they are and the differences between them are, I don't know).
Logging into the officejet control panel and browsing at its network configuration, I see mDNS, SNMP, and WINS are disabled, although SLP is enabled. Looking in '/etc/cups/cupsd.conf', I see 'BrowseLocalProtocols' is set to only CUPS and DNSSD, so I add SLP and restart CUPS. No change; the officejet still doesn't show. I go back into the officejet control panel and enable mDNS (which, if I understand correctly, is essentially the same as DNSSD). Nothing; the officejet still doesn't show.
Fedora :: CUPS Server Has Hung / Unable To Do Any Admin Functions
Aug 25, 2011My CUPS server has hung. Doesn't ask login user/pwd any more - goes straight to admin page. When I try to add printer I get an authorisation error. So unable to do any admin functions: add printers, disable Kerberos authentication etc.
View 1 Replies View RelatedGeneral :: Xset: Unable To Open Display
Oct 30, 2010I tried to log on to a remote computer using ssh, but I got an error:
xset: unable to open display
General :: Xwd: Unable To Open Display 'localhost:15.0'
Jul 5, 2011I'm SSH'ed in to my Ubuntu 11.04 machine and trying to take a screen shot of a virtual display where I'm running (hopefully) Firefox. I get the error
Code:
selenium@selenium:~$ xwd -display localhost:15.0 -out ~/desk.xwd -root
xwd: unable to open display 'localhost:15.0'
I know that I have displayed the right display variable because in an earlier script that runs at system bootup I have
Code:
export DISPLAY=localhost:15.0
/usr/bin/Xvfb :15 -ac -screen 0 1024x768x16 &
General :: Unable To Open /proc Folder?
Sep 13, 2010i had some issue with the machine rebooting multiple times, What happens is that the machine boots up and suddenly crashes and then boots up cleanly. I was going through the log files during when this occurs. I came across /var/log/syslog which i guess logs messages before shutdown. It has following messages which i think are causing problem.
Could not open /proc/26694/stat: No such file or directory
Could not read the file /proc/26694/stat
Could not open /proc/31128/stat: No such file or directory
Could not read the file /proc/31128/stat
Does any one know what these messages are?
General :: Unable To Open /dev/sda5(6) Using Fdisk?
Jul 21, 2011administrator@ubuntu:/dev$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 7.5G 4.4G 2.8G 61% /
none 431M 640K 431M 1% /dev
[code]....
OpenSUSE Network :: Unable To Get Studio15 To Print To Remote Cups Printer
Jan 11, 2010the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies View RelatedOpenSUSE Network :: CUPS Does Not Recognize Ubuntu Cups Server On Intranet?
Feb 24, 2010I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
Ubuntu :: Cups Password / Add A Root Users To Access 127.0.0.1:631 Interface For CUPS?
Feb 26, 2010I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Ubuntu Security :: 631/tcp CUPS / Close Port / Stop This Service / Tell Update Manager To Shove Cups?
Feb 27, 2011Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
General :: Java - Unable To Open Excel Sheet ?
Jan 12, 2011I am not able to open excel file which is generated from java web application in Linux. The file is opening in Windows but not in Linux. I am not using Open Office. I have two different applications deployed in two different was7 servers in same Linux machine. Both the applications generate excel output stream which I open in IE. When I am trying the same application in Windows environment both are working fine, but in Linux I can open and download xls files in one application but not in other. I am using application/vnd-ms... as mime type and POI jars to generated excel, no errors in my debug log or system errors.
View 2 Replies View RelatedGeneral :: Pine Is Unable To Open Pdf, Docs Ooffice And Jpg?
Jun 3, 2010There are about 120 users on linux centos server,most of them access their mails with pine, users are unable to open attachments of PDF, docs or JPEG with view attachments with pine. Can anyone let me know what configurations will make this work. I tried ssh -x username@xyz... error is kdf not found.
View 1 Replies View RelatedGeneral :: Unable To Open Documents In OpenOffice Writer
Jan 18, 2010I have a problem with regards to opening the open office. every time I open a document, I cannot view it. It says the application cannot be started. The user interface language cannot be determined. What's the possible cause on this? How will i correct this error?
View 12 Replies View RelatedUbuntu Servers :: CUPS Not Forwarding To Other Polled CUPS' In 10.04?
Mar 22, 2011I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
General :: Unable To Open Pty - Permission Denied While Trying To Login To Vps Node
Mar 8, 2011Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedFedora :: Cannot Open PDF's In Firefox - Unable To Open Document
Aug 9, 2010As of this morning I cannot open pdf's by clicking on them in firefox. I can download them and open them from the download window or even from the folder they are saved to, but not from the browser. Evince opens and says: Unable to open document Error opening file: No such file or directory.
View 1 Replies View RelatedSlackware :: 13 And CUPS / Cannot Get CUPS To Change From 'Letter'?
Feb 12, 2010I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
General :: Unable To Open Zebra Service After Installed Quagga Source File / Fix It?
Apr 8, 2011I have a problem about to open zebra service after install quagga by command(./configure ; make ; make install ) and add service port ("/etc/services")
#service zebra status
zebra dead but subsys locked
and can't telnet to zebra
"telnet: unable to connection to remote host: connection refused"
I following a manual http://www.quagga.net/docs/docs-info.php but it's not perfect.