Ubuntu Installation :: Unable To Migrate To Dependency Based Boot System
Jan 13, 2010
I have just had an auto-update, and the process has stopped with the warning above. The full error message is given below. I had already had problems (not sure if they're somehow resolved or related to this) with updating [URL]. Tests have determined that problems in the boot system exist which prevent migration to dependency-based boot sequencing:
package virtualbox-ose removed but not purged, insserv: warning: script 'K20acpi-support' missing LSB tags and overrides, insserv: warning: script 'usplash' missing LSB tags and overrides, insserv: warning: script 'hwclock-save' missing LSB tags and overrides, insserv: warning: script 'acpid' missing LSB tags and overrides, insserv: warning: script 'gdm' missing LSB tags and overrides, insserv: warning: script 'failsafe-x' missing LSB tags and overrides, insserv: warning: script 'acpi-support' missing LSB tags and overrides, insserv: warning: script 'udevmonitor' missing LSB tags and overrides, insserv: warning: script 'hwclock' missing LSB tags and overrides, insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides, insserv: script virtualbox-ose: service vboxdrv already provided!, insserv: script virtualbox-ose: service virtualbox-ose already provided!, insserv: warning: script 'dmesg' missing LSB tags and overrides, insserv: warning: script 'procps' missing LSB tags and overrides, insserv: warning: script 'atd' missing LSB tags and overrides, insserv: warning: script 'avahi-daemon' missing LSB tags and overrides, insserv: warning: script 'udevtrigger' missing LSB tags and overrides, insserv: warning: script 'apport' missing LSB tags and overrides, insserv: warning: script 'udev' missing LSB tags and overrides, insserv: warning: script 'ufw' missing LSB tags and overrides, insserv: warning: script 'rsyslog' missing LSB tags and overrides, insserv: warning: script 'anacron' missing LSB tags and overrides, insserv: warning: script 'network-manager' missing LSB tags and overrides, insserv: warning: script 'dbus' missing LSB tags and overrides, insserv: warning: script 'udev-finish' missing LSB tags and overrides, insserv: warning: script 'module-init-tools' missing LSB tags and overrides, insserv: warning: script 'hal' missing LSB tags and overrides, insserv: warning: script 'cron' missing LSB tags and overrides,
To reattempt the migration process after the problems have been fixed, run "dpkg-reconfigure sysv-rc".
View 4 Replies
ADVERTISEMENT
May 8, 2011
Encounter errors of files with "missing LSB tag and overrides". Looking up the recommended website, I found the following instructions.
insserv: warning: script 'X' missing LSB tags and overrides
The /etc/init.d/X script is lacking the LSB fields. Adding them to the script header or as a override file in /etc/insserv/overrides/X would solve it.
But where to get the LSB field? There is a list of known files but those giving problems are not among them.
View 3 Replies
View Related
Jun 2, 2011
What is the difference between Fedora 15 Live cd & Fedora 15 Install DVD?
I am unable to install using Live cd on my Pentium 3 based system.
Will the Install DVD solve that problem?
Max ram is 512MB on my system & there is no more room for any upgrades.
View 5 Replies
View Related
Mar 15, 2010
I installed the Eclipse IDE using Ubuntu packages. (Version 3.5.1. Package name:eclipse).A few days back, version 3.5.2 was released. I would like to update, so I added the following websites to the list of available ones:
[URL]
I then tried with Check for Updates. While on my Mac installation this results in an update to 3.5.2, on Ubuntu the program says there is nothing to update.If I try to install manually, choosing Install New Software and the then selecting the Eclipse Platform 3.5.2, I get the following error:
Cannot complete the install because of a conflicting dependency.
Software being installed: Eclipse Platform 3.5.2.M20100211-1343 (org.eclipse.platform.ide 3.5.2.M20100211-1343)
Software currently installed: Eclipse Platform 3.5.1 (Eclipse Platform 3.5.1)
Only one of the following can be installed at once:
[code]....
it is possible to update the packaged verison of Eclipse or if I should install the binary from the website?
View 3 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Apr 17, 2009
When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Oct 4, 2010
I want to change my partition configuration, and migrate my install to a drive I haven't used in a while.I've followed the steps which I have seen in several locations, but for some reason I can't boot into it (hopefully it's something simple )Here's what I've done so far:Deleted all of the partitions on the drivecreated a new EXT4 and swap partition on the drive (and others that are currently unused)mounted the new drive, and rsynced the old drive with this command:
Code:
sudo rsync -va --exclude=/media --exclude=/proc --exclude=/lost+found --exclude=/mnt --exclude=/sys --progress / /media/ubuntu
[code]....
View 4 Replies
View Related
Mar 4, 2010
How do I migrate a system from one machine to another. By this I mean install a new system on a new machine then have a copy of all the settings etc from the old one copied to the new one.
View 5 Replies
View Related
Jun 12, 2010
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit enter to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shell will be started"
This occurred after I was using it and then everything suddenly froze up on me and I had to crash out Now this!
View 6 Replies
View Related
Sep 2, 2010
I have a system built and running in exactly the basic configuration I want, with my recompiled kernel, extra packages, special drivers, everything works, life is good. What I want to do is take this exact setup and create an image I can copy onto a bootable USB stick. Is there a way to essentially take the contents of my hard drive and copy that onto a USB stick and then boot directly from that? The use case behind this is that I am building an embedded system of which I may have hundreds of boxes with identical hardware and software configurations. Instead of hard drives, I am going to use USB sticks for cost efficiency and maintenance. My idea is that when it's time to upgrade, I could just image a hundred new sticks and go out and swap them.
My issue is that a standard LiveCD install gets me maybe 25% of the way to a finished system. I need to recompile the kernel for realtime support with my CPU, add some fidgety drivers for some specific hardware, and install a whole bunch of additional packages. I suppose I could create a makefile(s) to replicate all the manual steps of the buildout but that seems like a lot of unnecessary complexity IF I can just image that running system as it is.
View 3 Replies
View Related
Feb 4, 2010
I've been running Fedora 10 in a computer with Asus motherboard,M2V, but I want to move the hard drive with Fedora 10 installed on to another computer with Asus motherboard,M2NPV. The reason I mention both motherboards by their name is because both of them are almost identical except for the boards.
When I try to boot Fedora 10 in the one with M2NPV, the boot process complains that it can't find the root file system.
The Fedora OS was installed on one hard drive with the following partitions:/boot partition LVM Volgroup partition swap partition.
It appears to me that the boot loader can't find /boot partition and thereby the initrd.img.
I tried to rebuild initrd.img, but the rescue disk could not find the installed OS.
View 6 Replies
View Related
Jan 28, 2010
Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
View 5 Replies
View Related
Jan 19, 2011
I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
View 9 Replies
View Related
Dec 29, 2010
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies
View Related
Jul 11, 2009
I have a working system running some older fedora, and new hardware running a fresh, new fedora install. I want to basically transfer my computer's "soul" into the new system ( user's stuff, firewall configuration, the various server & security configurations, etc.) and basically any customizations and non-hardware related packages installed that weren't part of the standard fedora install process. I'm looking for a magical easy button I can push to do all this (pause for laughter). Essentially, I want to "upgrade", but starting with a clean install on a different computer with different hardware. I have a vague idea of what needs to happen, like copying the /etc/*.conf files, /home directory, etc. but this seems very tedious, and the likelihood of me forgetting or overlooking something is 100%, and copying over entire disks or partitions wholesale is not necessary, and does not work for this scenario. I need to place/merge just the right files/directories in just the right places with surgical precision. Is there a utility for this? Maybe a way to diff the packages of the 2 computers and install the difference? Or at the very least some sort of checklist that could be scripted for my system? I'm desperately trying to avoid the pain, human misery & suffering encountered getting everything in the 1st system going.
View 3 Replies
View Related
Jun 17, 2011
I am currently considering migrating an openSUSE X86-64 system from 11.3 to 11.4. There seem to be 2 possibilities, upgrade or reinstall. Opinion seems to be divided on the process of upgrading from the DVD.I have not been able to find any reasonable guide to using either method to migrate an 11.3 system to 11.4 and have the 11.4 system in the same working state as the 11.3 system was. What I have found for the reinstall method is trivial. for the upgrade method I have seen a reference to running rcrpmconfigcheck but I have been unable to find a man page for it on my 11.3 system or via google.
Does such a guide exist? It should be created by the openSUSE project for each release.If it works the upgrade process looks to be the best method. The last 2 migrations were via the install method. 10 to 11 but also 32 to 64 bit and then 11.1 to 11.3 onto a new machine before moving the data across. Both rebuilds took many days.I have seen many posts saying that it is very quick to rebuild the system. As little as 2 hours has been quoted. I have not yet seen an explanation of how they do it. I suspect that they rebuild systems regularly and have it all scripted or their systems are very simple. An explanation of how it is done would be interesting.Given that I do migrations once or twice a year, building and testing a script to do the migration is probably not worth the effort especially as the only test machine is very old and slow
View 5 Replies
View Related
Mar 7, 2011
I am trying to migrate my existing system with one IDE disk , tools installation already done... without loosing informations and having to install once again every things, to RAID1 (soft) with a second IDE disk I tried to do this using somme informations given on forums but i always have a kernel Panic at the end of boot What I did:
The system is going down for system halt NOW!
login as: root
root's password:
/usr/bin/xauth: creating new authority file /root/.Xauthority
[code]....
View 8 Replies
View Related
Oct 6, 2015
I've been experimenting with Debian coming up with a system with suits my needs. I have done this and I'm wondering, "Do I have to start from scratch on my physical machine or can I convert an existing VDI to IMG and possibly port it to the physical machine?"
System: Debian Testing
View 5 Replies
View Related
Mar 11, 2011
I bought a new NVidia Asus EN210 for my HTPC, but I can't get Ubuntu to install.
First I made a live USB disk of 10.10 with Unetbootin and when I choose the option of "try Ubuntu" it starts loading and then just hangs, still showing the menu of boot options. After this I tried Xubuntu on a USB disk. This one also starts loading but then just fails. I also tried XBMC Live. This one does show the Ubuntu 10.04 screen but then just shows a black screen.
After this I found a CD with Ubuntu 10.04, I think or it is 10.10, laying around in my room. I booted it and once I select an option from the install menu it starts to load, but then just gives a black screen with a flashing "-" sign.
The strange thing is, once I pop in the old video card, which is an ATI HD4350, my Ubuntu 10.10 Live CD on USB disk does work and it does get past the menu of boot options (in my second paragraph I describe how this isn't the case with Ubuntu 10.10 combined with my NVidia card).
View 3 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Jun 16, 2009
Is there a way to boot any current kernel without the nolapic flag on ICH8-based intel T7300 systems? This system works fine with the last 2.26 kernel from FC8, but due to EOL of the security updates I tried to install FC11 and FC10. The first sign of trouble is that their installation only works with acpi=off or nolapic options. As those options disable either fan-control or the second cpu-core I consider them undesirable. Is there a recent correctly working kernel available? Or do I have to downgrade to a distribution that uses a 2.26 kernel?
View 3 Replies
View Related
Jun 3, 2010
I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
View 6 Replies
View Related
Mar 31, 2011
actually i am new for this forum and for Linux also. i am using redhat enterprise Linux 5 its not licensed. i am having so much dependency issues is there any way by using which i can resolve dependencies. and i am already made repository. but till i am facing the same issue for any rpm.
View 1 Replies
View Related
Jan 2, 2010
I have dual boot (wubi) Windows XP. It was working smooth until I upgrade ubuntu 9.10. At the boot screen I choose Ubuntu, then it ask me wich version, then it freeze. I tried the recovery version, but then it ask me for a user ID login and password. At this point I'm able to enter the user , but it don't type anything on the password and keep asking me to enter the user id and password again, and again.
View 2 Replies
View Related
Jun 12, 2010
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit entry to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shel will be started" Where do I go from here? to figure out whats going on?
View 8 Replies
View Related
Mar 18, 2010
I have to haredisk in my system "sda" and "sdb" in sda there are 2 OS installed which are RHEL5 and windoesXP
Now I tryed to install Ubuntu and it got installed successfully.when I reboot my PC I found that my RedHat grub has got crashed.
I Again booted my system with RHEL5 DVD and entered in that rescue mode and and installed that Redhat grub (grub-install /dev/sda(#pwd /boot)) and when i see my system after getting reboot that Ubuntu grub was missing
This issue as my requirment is that i want my system to detect all that three OS which are installed..
View 5 Replies
View Related
May 27, 2010
I have installed Ubuntu in my system.After a forced shutdown i am unable to boot into my system.when booting via recovery mode its failing in file system check.Its telling "fsck:No such file". But if i boot "normal boot up" its booting up and i am able to login.After logging in, nothing is getting displayed.Just a blank screen comes up.After sometime screen saver comes.If i press any button desktop screen appears but no folders are displayed.
View 5 Replies
View Related
Jan 20, 2010
I'm trying to migrate my emails and (at least) account settings from Thunderbird 2 that is installed on my main machine here, and move them to another Windows-based installation of Thunderbird.
I tried searching here and Mozilla.org, but can find no answer. Since the source Thunderbird installation is the one installed on my Ubuntu machine, I thought I'd start here. (plus, I get better answers here)
View 2 Replies
View Related
Apr 1, 2010
I'm just trying to migrate to Ubuntu 10 Beta from Gentoo. One option in the installer intrigued me. It said something like (from memory) "Use password to log in and decrypt my home directory".
What happens behind the scenes when I choose this? (How) can I enable this later on? (I didn't activate it because I wanted to migrate my Gentoo user's home as painless as possible.)
View 1 Replies
View Related
