Ubuntu :: Open Cups-pdf Output In Pdf Reader Automatically?
Jan 15, 2010
I've got cups-pdf installed and working fine to print to PDF.
What I find kind of annoying is that it prints silently to ~/PDF with an automatic filename and with no feedback when it is done printing. So I have to monitor that directory manually for when a new file shows up.
What I'd like to have when I print to PDF is the output of cups-pdf piped to a pdf reader (like okular, in my case) which would open automatically when the printing is done so I can review the results and save or discard them.
I've looked through the options and tried to find documentation on cups-pdf, but I haven't found a way to make this happen yet.
After my update to 9.10 I had not notice that CUPS, Samba, lighttpd (and maybe other serives that I've not missed until now) don't start up during system start no longer. After all, things look quite normal in the directory /etc/rc3.d, which has the appropriate links S20samba, S20lighttpd and S50cups, all of them working when I use them directly. But wait! Ubuntu uses updstart now, does it? I have yet to understand what that means to the classic startup scripts in /etc/init.d.
Tech support installed a new computer for me at work yesterday and it's running 64-bit Ubuntu 9.10. I succeeded in installing Adobe Reader 9 (I need to review PDF documents in a number of PDF readers including Adobe as part of my job) but I can't open any PDFs using Reader. I ran "acroread" in the shell and it rendered this output:
Code: (acroread:17035): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (1179128842) I've tried Googling all this, but nothing helpful has been forthcoming.
I have recently installed Adobe reader. But I just cant seem to open any pdf file using it. When I give the command "acroread <filename>" from the terminal it gives me a error saying: /usr/bin/acroread: line 486: [: -ge: unary operator expected
I'm using fedora 13 (64 bit) distro. I had installed adobe reader recently through the "bin" file. everything installed correctly in the "opt/adobe" directory. But after installation when I tried to open a pdf document using adobe reader it doesn't respond anything. Even when I tried to open it through the kernel I got the error message as follows... Code: [pradeep@localhost ~]$ acroread /opt/Adobe/Reader9/Reader/intellinux/bin/acroread: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory [pradeep@localhost ~]$ s Should I do anything else after installing that bin file?
I have a PDF file that is portfolio. That means that a single PDF file contains many PDF documents (for example my PDF portfolio has 130 PDF documents). When I open this portfolio with the evince program I get this message: For the best experience, open this PDF portfolio in Acrobat 9 or Adobe Reader 9, or later.
I downloaded and installed the Adobe Reader 9 and everything went ok. I could open the portfolio and read all the PDF documents. Now, I am wondering if there is an open-source PDF reader that can read portfolios.
In 10.04 when i plugged my HiFi into a USB port audio would automatically switch to play out of it.Now in 10.10 i need to plug my hifi in then go to 'sound preferences'>'output' and select USB codec as my output AND unmute the device.Does anyone know of a way to revert to 10.04 behaviour?
I have openSUSE 11.2, 64 bits. I use Evince from the very beginning. Since a few weeks, when I want to open a .pdf file, Acrobat Reader appears and reads my file. It seems to have become the default reader now. However, I never wanted to change from Evince :this simple program is well enough for me. I tried various ways, but I can't define Evince as my default .pdf reader. How can I make Evince to become my default reader again please ?
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems. But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port) - uninstalling cups... (update manager nags) - fuser -k 631/tcp (great, but @ reboot the port is still open) Please teach me how to close this port / stop this service / tell update manager to shove cups.....
I have a set of bash scripts that I'm running that automatically build a set of packages for me and redirect their output into logs. Basically, I have a bunch of lines that are something like this: ${CONFIGURE_DIR}/configure &> ${LOG_DIR}/log or cd ${CONFIGURE_DIR} && make &> ${LOG_DIR}/log, etc.
This is supposed to make the entire process silent. However, sometimes with some packages some output leaks to my console (either stdout or stderr). I'm thinking that maybe the configure scripts/make are executing commands within new shell instances that don't inherit my redirect, or something to that effect.
Another reason for thinking this is that in another part of my script I detect errors when running make by testing with "if [ $? -ne 0 ]", and if the redirect leaks to my console and also the leaked output indicates that the build failed ("make: Error" and so on), then my $? test fails (i.e., it thinks that $? == 0, whereas a failed make should return a non-zero value). It's as if my original script can't "see" the results from child commands executed from later scripts.
Doesn't seem as straightforward in KDE, but I'd like to put my dvd's in and have VLC start them, i.e. open them to their features' menu automatically as I could in Gnome Can anyone describe me the steps clearly if this can be done?When I put a dvd in so far I get the right-hand options slide up in a box which mentions Dragon Player and K3b and so on. Dragon Player sems to get stuck if you accidentally hit the touchpad in the wrong place during a film, so I'd rather keep away from it
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
and error_log shows: E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
The title practically says it all, I'm using 9.10 Ubuntu fyi, when someone messages me in empathy, there is a pop-up top-left that says "so and so says xyz" but sometimes when I'm not looking, this may come up and only when I click on the mail icon I realise someone was trying to talk to me.
After installing a bunch of new updates with the update manager a few problems have popped up regarding the scrolling in firefox with the arrow keys. The first problem is that when I open up a new web page it does not automatically allow me to scroll. I have to first click the web page and then are the arrow keys enabled. The second problem that I have is that when I press the down arrow key to scroll down in the beginning it jumps down to the end of the page. The third and final problem is how it scrolls. For some reason a site in firefox acts like a word document. Instead of be the arrow keys controlling the scroll bar it controlls the little I symbol you see when typing.
It is amazing how annoying it can be when you can't scroll with the arrow keys. If nobody knows how to then I will probably just reinstall firefox. I have also just figured out that page up and down also do not work.
I am running Ubuntu 10.10 64-bit on my Dell studio 1557 with a broadcom 1394 wireless card.
I am wondering if it is possible to set my laptop to autojoin open wireless networks. I like traveling and it popped into my head. I am a novice linux user, long time windows user. I know its possible just how. like a terminal script or just a check mark somewhere. i broke my right hand and arm in a motorcycle wreck recently.
i have a simple sh script. It executes ok by clicking in dolphin but I would like it to automatically open a console window and execute in there so that I could see the output. Is this possible?
I have a number of applications that I like to have start when I log in. Is there a way to have them automatically open in a specified workspace? For example, I normally keep my e-mail in workspace 2 ('E-mail').
I am writing from lucyd. When I insert a blank CD opens a Nautilus window that asks me what program I want to use to open the CD. The last time I chose cd creator, and thereafter it no longer asks me what to do. How can I change this?In other words how can I choose another program to open automatically blank cds??
I did an automatic update and rebooted this morning and I now have a bit of a nightmare situation where I can't open the majority of applications, including the terminal. When I rebooted, my desktop loaded as normal, but then when I try to open the terminal (from Applications -> Accessories or from my quick launch panel), nothing happens other than the quick launch panel disappears for a second then reappears. This is the case for most other apps, but not for Chrome (obviously).
EDIT: Used Alt+F2 to open the terminal, ran safe upgrade and then rebooted, but still having the same issue. As Ubuntu was booting, there was a "Broken pipe" message, which didn't stop the boot process but is still a bit worrying. I've run a file system check but this hasn't resolved the problem either.
At the time of INSTALLATION im getting errors about not able open Input/output files... and some other errors... im using SATA 80GB HDD... i have already installed XP....
the sad thing is two months back i installed UBUNTU ..and i have worked on it... but unfortunately i formatted my entire system and now i got this problem...
I just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:
Code:
Cannot open file: input/output error
Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using
Code:
cp -r
and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting! cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
