General :: Ubuntu Wont Detect Hard Drive?
Feb 28, 2010
I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies
ADVERTISEMENT
Sep 10, 2010
I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
View 1 Replies
View Related
Sep 15, 2010
I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies
View Related
Aug 4, 2010
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
View 1 Replies
View Related
Jan 3, 2010
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
Nov 3, 2010
When I try to install it gets to the partition manager screen but does not see the hard drive.
Hardware Specs:
AMDX64 3800+ Socket 939 duel core
Asus a8n32-sli motherboard nforce 4 chipset
Nvidia 8600gts
2 GB Mushkin Memory DDR 400
Samsung 80GB Model: HD080HJ/P Hard Drive
Things I've tried:
I tried a different hard drive Western Digital Model:WD1600bevs - That Works Fine.
I tried Different Versions of Ubuntu 9.10X86 9.10X64 9.04X86 - None Detect Hard Drive.
I Tried Jumping the Samsung Drive from 3.0 Sata 2 to 1.5 - No difference
I tried th Samsung drive in an External USB 2.0 Encloser - Drive Works Fine.
I also tried installing Windows XP on the Samsung drive, Windows Detects the drive.
I deleted all partitions with acronis and repartitioned for Linux ext3 Filesystem.
At this point I determined that the drive works fine, The bios detects it no problem. Windows detects it no problem. My ubuntu CD's all pas integrity checks and will see a Western Digital Hard Drive No Problem. In my opinion it is like Ubuntu just doesn't support that perticular drive for some reason. Maybe Firmware?
View 3 Replies
View Related
Jan 22, 2010
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
View 9 Replies
View Related
Aug 3, 2010
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
View 2 Replies
View Related
Oct 28, 2010
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Apr 21, 2010
I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
View 4 Replies
View Related
May 26, 2011
I am installing Fedora 15 for the first time - Fedora-15-x86_64-Live-KDE.iso. I used LiveUSBCreator to copy to a memory stick.
I boot OK and start the install process and choose "Basic Devices" but it does not appear to detect my only hard drive (SSD). All it detects is the USB memory stick that I booted from.
I have Windows 7 on my disk. There is about 50GB free space which I planned to use for Fedora.
View 2 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
May 12, 2010
I installed Debian on a old hard drive (quantum 5gb) and ran with it for a couple of days.. BUT all my data (including windows) is on my other hard drive.. so my question is What do I have to do to make grub detect windows and linux when I attach the 2-nd hard drive?
View 2 Replies
View Related
Apr 29, 2011
I am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Nov 26, 2010
My terminal cannot detect the flash drive at all time.
View 4 Replies
View Related
Dec 14, 2010
Not sure whether is feasible or not...
Any idea how to script to detect whether are there any tape media loaded in the tape drive ?
View 3 Replies
View Related
Mar 18, 2009
Recently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Mar 23, 2010
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Mar 6, 2010
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies
View Related
Mar 8, 2011
Is Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies
View Related
