General :: How To Detect And Format New Hard Drive
Sep 15, 2010I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies
ADVERTISEMENT
General :: Format A USB Hard Drive To Vfat Format But Can't?
Sep 15, 2010I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
General :: Dsl Does Not Detect Hard Drive
Sep 10, 2010I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
General :: Doesn't Detect External USB Hard Drive
Aug 4, 2010In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
General :: Ubuntu Wont Detect Hard Drive?
Feb 28, 2010I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies View RelatedGeneral :: External Hard Drive Will Not Format?
Nov 4, 2010I have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies View RelatedGeneral :: How To Format An External Hard Drive
Feb 27, 2010I have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies View RelatedGeneral :: How To Detect And Mount An External Hard Drive Through Router?
Jan 3, 2010I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies View RelatedGeneral :: Format A Hard Drive In Order To Install?
Apr 15, 2010how do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
View 2 Replies View RelatedGeneral :: Missing Secondary Hard Drive After LVM Format ?
Nov 3, 2010My Red Hat EL 5.5 64 bit edition, I've install it on my primary hard drive 12 GB it works fine and then I added secondary 20 GB hard drive (sdb1) into this system and then format it as VolGroup01 see the attachment, but how come it doesn't show up ?
Code:
General :: Format Hard Drive On System That Will Be Compatible Witha Mac?
Aug 11, 2011hard drive formatting, compatibility with Macs, and Windows Etc, suggestions? GUID APM or what else? can I format a hard drive on a linux system that will be compatible witha Mac?
View 3 Replies View RelatedGeneral :: Finding A Tool That Will Detect Whether Having A SATA Or A PATA Hard Drive Interface?
May 18, 2010Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies View RelatedCentOS 5 Server :: Partitioning Hard On Hp Proliant Dl380 Doesn't Detect Hard Drive
Sep 11, 2010I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedGeneral :: Format External Hard Drive In NTFS Using The Utility Program?
Mar 21, 2010Trying to format a external Hard drive in NTFS using the utility program.
The error message is
"Error creating file system: helper exited with exit code 1: cannot spawn 'mkntfs -f /dev/sdb1': Failed to execute child process "mkntfs" (No such file or directory)"
Hardware :: Ubuntu Does Not Detect Hard Drive
Nov 3, 2010When I try to install it gets to the partition manager screen but does not see the hard drive.
Hardware Specs:
AMDX64 3800+ Socket 939 duel core
Asus a8n32-sli motherboard nforce 4 chipset
Nvidia 8600gts
2 GB Mushkin Memory DDR 400
Samsung 80GB Model: HD080HJ/P Hard Drive
Things I've tried:
I tried a different hard drive Western Digital Model:WD1600bevs - That Works Fine.
I tried Different Versions of Ubuntu 9.10X86 9.10X64 9.04X86 - None Detect Hard Drive.
I Tried Jumping the Samsung Drive from 3.0 Sata 2 to 1.5 - No difference
I tried th Samsung drive in an External USB 2.0 Encloser - Drive Works Fine.
I also tried installing Windows XP on the Samsung drive, Windows Detects the drive.
I deleted all partitions with acronis and repartitioned for Linux ext3 Filesystem.
At this point I determined that the drive works fine, The bios detects it no problem. Windows detects it no problem. My ubuntu CD's all pas integrity checks and will see a Western Digital Hard Drive No Problem. In my opinion it is like Ubuntu just doesn't support that perticular drive for some reason. Maybe Firmware?
Fedora Installation :: Setup Does Not Detect Hard-drive ?
Apr 21, 2010I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
Fedora Installation :: Install Does Not Detect My Hard Drive ?
May 26, 2011I am installing Fedora 15 for the first time - Fedora-15-x86_64-Live-KDE.iso. I used LiveUSBCreator to copy to a memory stick.
I boot OK and start the install process and choose "Basic Devices" but it does not appear to detect my only hard drive (SSD). All it detects is the USB memory stick that I booted from.
I have Windows 7 on my disk. There is about 50GB free space which I planned to use for Fedora.
Ubuntu :: Auto Detect Hard Drive Errors?
Jan 22, 2010Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
Ubuntu Installation :: Unable To Detect Hard Drive
Aug 3, 2010 my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
Ubuntu :: 10.10 Installation Doesn't Detect Hard Drive?
Oct 28, 2010When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies View RelatedUbuntu Installation :: Ubunto 8.04 Cannot Detect Sata Hard Drive Or Sata Drive Cdrw?
May 28, 2011ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedUbuntu :: Can't Format Hard Drive After Using It With Xbox
May 14, 2010I have an 80gb hard drive that I used in an xbox for xbmc and it was formatted to whatever it needed to be formatted to for it. Now that I want to use it in my computer, I can't format it back to ext4 or NTFS. It's somewhat recognized, but the partition shows up as unknown. Is there a program that I can get to reformat it? idk if gparted will work cuz it won't startup on the live CD. I will give it a shot once I install ubuntu onto the computer.
View 9 Replies View RelatedUbuntu :: Format Hard Drive To - APPLE?
Nov 23, 2010I was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
View 3 Replies View RelatedUbuntu :: Format A New External Hard Drive?
Dec 18, 2010I just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
View 9 Replies View RelatedUbuntu :: Cannot Format External Hard Drive ?
Aug 10, 2011I wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
View 3 Replies View RelatedDebian Installation :: 8.0 Installer Does Not Detect Hard Drive During Install
Jun 26, 2015“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
OpenSUSE Install :: How To Partition And Format Second Hard Drive
Sep 6, 2010I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies View RelatedUbuntu :: Reset The System Which Will Also Format The Hard Drive?
Jan 28, 2010I've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
View 9 Replies View RelatedUbuntu Installation :: Format The Hard Drive And Re-Install?
Jun 23, 2010An upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive,
b) not keeping the 2 partitions, and
c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
Ubuntu :: Format A USB Flashdisk Or External Hard Drive?
Jul 28, 2010and am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
View 7 Replies View Related
