General :: Script To Detect Whether Tape Exist In Its Drive - Not?
Dec 14, 2010Not sure whether is feasible or not...
Any idea how to script to detect whether are there any tape media loaded in the tape drive ?
ADVERTISEMENT
Debian Hardware :: Getting HPE Library And Tape Tools To Recognize Tape Drive
Apr 3, 2016I have been using an LTO-5 Ultrium-3000 tape drive connected to an ATTO HBA without problem. I can control the tape drive using "mt -f /dev/nst0" and have been able to make successful backups using cpio, tar, and dump/restore. I followed some instructions on the web about how to install the HPE Library and Tape Tools application (version 4.21) which relies on conversion of a rpm to a deb file. The software seems to have been installed correctly and runs. However the hardware scan function does not recognize my tape drive. The following is suggested in the user manual if the tape device is not recognized by the software under Linux:
1. Login as root.
2. Edit the following file:
vi /etc/modules.conf
3. Add the following line as appropriate:
add options scsi_mod max_scsi_luns=128
4. Reboot the computer.
The problem is I don't have an /etc/modules.conf and am not sure exactly which file would be equivalent? If this is even the correct solution.
My tape drive is controllable and functions well using "mt -f /dev/nst0 status" so it seems to be a matter of LT&T software to detect the tape drive.
At the risk of providing too much info here some, possibly relevant, output from lshw
*-pci:3
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: b5
[Code] .....
Ubuntu :: Use The Tar Command With A Tape Drive - Data Is Larger Then 1 Tape
Mar 8, 2010I am looking at getting a DLT drive for my network; however, I have never used the tar command with a tape drive. What happens if the data is larger then 1 tape? Does the tar application automatically span tapes or do I need to use switches so it spans multipule tapes? Right now my Full backup will take 2 or 3 tapes.
View 3 Replies View RelatedRed Hat :: Unable To Insert DAT72 Tape In Tape Drive / Fix It?
Dec 8, 2008I have dell poweredge 830 server with tape drive and RHEL 4 running on it....the issue i am facing is,i am unable to insert the tape as i had ejected the tape forcefully from it....
i tried to do a listing of the contents backedup on tape and it got struck in middle throwing below error,
/dev/st0:device input/output error. after which i was unable to eject the tape using
mt -f /dev/st0 rewoffl
i removed the tape by holding the eject button and now when i try to insert another tape, it's unable to take the tape in to tape drive...
I've tried doing all except reeboting the server, can any one help me out in this issue, hope the blow information may help in debugging the issue... code....
General :: Use USB Tape Drive On Centos 5.3 (kernel 2.6.18-164.10.1.el5PAE)?
Mar 2, 2010I have been trying to install HP Storageworks DAT72 on CentOS 5 in vain. On system reboot, neither /dev/st not /dev/sg is available.
lsmod
Module Size Used by
ipv6 267617 40
xfrm_nalgo 13381 1 ipv6
[code]....
General :: GRUB Loader Says Drive Doesn't Exist
Feb 15, 2010If at all possible I would like ot keep the GRUB loader and repair my situation.My slave drive has Windows 7. My master had Ubuntu on it. When it installed it added the GRUB loader.I replaced it with Fedora, but now the GRUB loader says it can't find the drive and bails to grub-rescue.If possible I would like to keep the grub loader. If I can't repair this, is there a way to uninstall it and reinstall it.
View 16 Replies View RelatedHardware :: Retrival Partial Files From Lto 4 Tape Instead Of Retrieving Complete Tape
Apr 26, 2010I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies View RelatedUbuntu :: Backup To Tape Drive (hp Dat 72)?
Jul 5, 2010I am a Ubuntu 10.04 Desktop user.
I am searching for a backup software to backup to my hp dat72 tape drive. It is only to backup my data from 1 PC.
I have already found bacula but it seems to big for my purpose. I need an easy and automatic software.
Could you recommend a backup software for my needs?
Server :: Tape Drive Is Not Working
May 17, 2011We have RHEL4 loaded on the server and our tape drive is not working.While taking the backup on the tape using the command tar cvf /dev/nst0 * the system is creating a tar file by the name of nst0 in /dev directory and no backup is being taken on the tape .Please provide solution.
View 1 Replies View RelatedFedora Servers :: Tar And Mt Commands For Tape Drive?
Feb 26, 2010I'm having issues with mt commands. For some reason, my server doesn't like backing up directories using tar.
Code:
# tar -czf /dev/st0 /www /home
ends up giving me an error message saying "removing / prefix" and then using the command
Code:
# mt -f /dev/st0 status
gives me an IOCTRL error. I've googled the error code and haven't come up with a viable fix. Thus far, the only way I've been able to check which files are on the tape is:
Code:
# tar -tzf /dev/st0
Of course, without getting the actual directories on the tape in the first place, the only files I've been able to transfer at this point are just singular files within the directories as opposed to the entire directories themselves.
Server :: Install And Mount DAT Tape Drive?
Jun 24, 2011iam trying to access tape drive .but iam not able to see its location.is any command to install and access tape drive
View 2 Replies View RelatedServer :: Tape Drive Backup Linux
Oct 8, 2010i have centos 5.9 running on my server and i have to take backup of my entire data from the different server.This one I want to make it as backup server. I need few informations about the tap drive
1.Which tape drive is good also compatible with Linux (centos ), pls send me the link
2.How to take backup into tape drive , good if you send any doc.
3. Any backup software which is kind of opensource
Red Hat :: Installing Ultrium 448 External Tape Drive?
Mar 5, 2011I have issues in installing HP Ultrium 448 external tape drive on HP ML 370 G5 server running Red-Hat-Linx OS. It has a SCSI interface & I thought it was suppose to plug & play but not. I got an information that all i need to do is echo "engage scsi" > /proc/drivers/cciss/cciss1 but unfornately i do not know how to do this because i just began learning about LINUX,
View 1 Replies View RelatedRed Hat :: Make A Hard Disk Act Like A Tape Drive?
May 4, 2011I have a linux server running Red Hat Enterprise Linux AS release 4 (Update 8) that I need to do some unusual configurations to. I have a hospital application written using a database called MSE. Now the provider of this application says they will only support tape because of the fact that this system is using a specialized backup system. Basically the data is housed on raw_data blocks. So what I am looking to do is create a way to USE the SAN to present the server with Hard Drives and be mounted as if it was a tape. Has anyone tried to do something like this before? If so how did you configure that. One solution that I thought would be to just Present a 2TB lun and carve up several partitions cut not create filesystems on them. Then just create a symlink everynight /dev/rmt0 and rotate out the partitions.
View 5 Replies View RelatedCentOS 5 Hardware :: Vxa-2 Tape Drive Not Found
Jul 17, 2009I installed centos on a server with a exabyte vxa-2 tape-drive. There are two harddisks and the tapedrive on the Adaptec SCSI 2010s Contoller. The harddisks are working , but it doesn't find the tapedrive. And there is nothing in /proc/scsi/scsi.What can i do to add the tape drive?
View 1 Replies View RelatedHardware :: Bacula - Setting Up Tape Drive Backup
Sep 15, 2010I am setting up a tape drive back up, but I am having "fun" with bacula configuration. Basically the drive is working , I ran the test with the btape program and all was correct. I am basically meddled up with the jargon and the very large bacula documentation. I created some 2 volumes and gave the mounted the tapedrive (labeled) the name of one of them "tapevol2" .... now I can not relabel the tape, I deleted the volume "tapevol2" but still the tape drive is mounted with that name, even though the volume is deleted. If I add ( create more volumes) I can not make the tape to mount with anything different that "tapevol2". I would like to go back to zero and delete all volumes, and mount the tape with one of the newly created volumes, so the jobs back up can run.
View 2 Replies View RelatedHardware :: System To Command To Clean Tape Drive?
Sep 30, 2010I have a questions concerning tape drives.
Is it necessary to erase tape before recording ?
Do You know linux command to clean tape drive ?
Server :: Enabling Compression On Ultrium LTO-2 Tape Drive?
May 26, 2011We have been using an Ultrium LTO-2 tape drive to perform backups of certain information from our file server. Recently, the data that we are backing up has grown too large to fit on the tapes in their 200GB uncompressed capacity. I have been looking around for a way to enable the compression in the drive, but I haven't found much. I am not using any backup software, so I'm not sure if I'll even be able to. I write the tape using a simple 'tar' command, so there aren't a whole lot of options to be set. Is there a way that I can enable the drive's compression, or would I be better off running the tar command with the gzip or bzip flags?
View 4 Replies View RelatedServer :: Enabling Encryption On LTO4 Tape Drive?
Oct 22, 2010I didn't know if I should have posted this in newbie, hardware, or server. I haven't used tape drives in Linux previously; however I'm trying to figure out how to enable an LTO-4 tape drives built in encryption. Im not that concerned with secure key management, I am looking to just being able to load a key into the drive and get the tape to encrypt. Im for a simple command, but I dont even know where to start. If it varies by device, its an HP Ultrium 4 (1760).
View 2 Replies View RelatedGeneral :: Dsl Does Not Detect Hard Drive
Sep 10, 2010I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
Red Hat / Fedora :: Got A Tape Drive Attached To Server Connected By SAS Card?
May 25, 2010I've got a Tape drive attached to my server connected by SAS card, and am trying to copy some data across.but it fails to write, in dmesg i seescsi 1:0:1:0: Attached scsi generic sg1 type 1mptbase: ioc0: LogInfo(0x31120403): Originator={PL}, Code={Abort}, SubCode(0x0403) does this mean faulty hardware/cables?
View 1 Replies View RelatedHardware :: Exabyte Vxa 3 Tape Drive - Mt -f /dev/nst0 No Such Address Or Device
Jan 3, 2011I have an LTO-3 tape drive.
It shows
Code:
when I do:
Code:
I am running as root
Would like to NOT reboot this server. (WEBSITE) It is running Red Hat Enterprise Linux ES release 4 (Nahant Update 8)
Server :: Make Storageworks Tape Drive Work With Redhat 5?
Nov 25, 2010make storageworks tape drive work with redhat 5
View 3 Replies View RelatedGeneral :: How To Detect And Format New Hard Drive
Sep 15, 2010I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies View RelatedGeneral :: My Terminal Cannot Detect The Flash Drive
Nov 26, 2010My terminal cannot detect the flash drive at all time.
View 4 Replies View RelatedUbuntu Installation :: Accessing The L-TO-4 SAS External Tape Drive And Backup Data On It?
Feb 28, 2011I am running Ubuntu 10.04, and i recently purchased an tandberg LTO-4 SAS tape drive. I want to access it and backup data on it. Do I simply just connect plug it into the server,and I should be able to backup/transfer data to the tape drive? Or are there intermediate steps before I can do that. Here are some results from commands that I have typed:
Quote:
ls /dev/tape/
by-id
Quote:
ls -lt /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 2011-02-25 14:54 scsi-3500110a00145553e -> ../../st0
lrwxrwxrwx 1 root root 10 2011-02-25 14:54 scsi-3500110a00145553e-nst -> ../../nst0
[code]....
General :: Doesn't Detect External USB Hard Drive
Aug 4, 2010In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
General :: Ubuntu Wont Detect Hard Drive?
Feb 28, 2010I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies View RelatedCentOS 5 Hardware :: Support HP EH854A LTO4 External SCSI Tape Drive?
Mar 24, 2010Does CentOS 5 support HP EH854A LTO4 External SCSI tape drive?
View 3 Replies View RelatedGeneral :: Unable To Detect Sata Dvd Drive In My Fedora Box / Sort This?
Mar 18, 2009Recently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies View Related