Ubuntu Networking :: Dell 1397 Wireless Card Not Working With Live USB
Mar 9, 2010
I have a Dell Inspiron 1545 running Windows 7 64-bit. It has a Dell 1397 Wireless card with Broadcom BCM 4312 hardware. This is proven by running lspci in Terminal. I downloaded Ubuntu 9.10 64-bit and burned a disc of it. I used System>Administration>USB Startup Disc Creator to make a Live USB from a 4GB flash drive. I plugged it in and my computer booted into Ubuntu with no trouble. The only problem is that I can't connect to my wireless network. The problem is that no matter how I install the Broadcom STA driver, it just says that the driver is activated but not actively in use. I've used Synaptic Package Manager, Jockey, and even Terminal. I've tried running
Code: sudo modprobe wl
in Terminal, but nothing seems to happen. In Ubuntu, my computer acts as though it has no wireless card, but the wired connection is fine (except for the inconvenience of connecting with a cable). In Windows 7, the wireless connection is fine.
I have a Dell Inspiron 1545 computer. I boot into Ubuntu with a flash drive. When I boot, I cannot connect to a wireless network. No available networks are displayed (and I know my router is on) and the Network Manager icon displays no bars. I suspect that the Dell Wireless card (having a Broadcom BCM-4312 chipset) needs a driver. I have tried to intstall both of the restricted drivers (BCM STA and 43xx drivers), but with no success. I have run lspci in Terminal, and got many lines of text. Here are the lines that look relevant to me:
Code: 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) In Windows 7, everything is just fine. In Ubuntu, my wired connection works like a charm, but is not really accessible. Basically, I have to connect to wireless in Ubuntu or I have no reason for having it.
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
I have a 10 year old Dell Latitude CPx that has no ethernet or modem ports, and the only way to connect to the internet is the Dynex Wireless G DX-BNBC PCMCIA card. It came with Windows 98, and I put Xubuntu on it for a while. I believe it was Xubuntu 8 or 9. Back then I had no clue what to do whatsoever, so after a couple weeks removed it and put Windows 2000 on it. It worked, I used it for a while, but it was slow and 2000 took up a lot of space on the 12gb hard drive after all the updates. I left it forgotten and gathering dust for the past year.
Then a few days ago I discovered Lubuntu 10.10, and from what I've seen so far it is definitely a lot more compact and faster than 2000. However, the wireless card still won't work. It's somewhat recognized, because whenever I unplug it and plug it in a bubble pops up saying "you've been disconnected from the network"... which is odd, since it never says I'm connected, and says that the firmware is missing for this card. Anyway, I discovered something this time. By running "lspci -nn | grep -i 14e4":
I have a Dell Inspiron 1525 laptop using Dell Wireless 1395 WLAN Mini-card (This is what Windows Vista says I have). I have installed Ubuntu as dual boot with existing Windows Vista. Wireless is not working in Ubuntu but working flawlessly in Windows.
Here is the output using CODE: lspci. hai@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) hai@ubuntu:~$
I have a DEll Mini 9 - it has worked fine even though it has a limited memory. But Husband only uses to have a surf. It now wont connect to net. The Broadcom4312 Wireless Card is not working on Obunto. It has a Dell 802.11b/g Wireless LAN Mini card installed and Obunto Edition Version 8.04 Have phoned Dell and after several calls on Hold for over 15 mins each time and getting nowhere fast i am coming to you guys/girls. I am not a very good comp person, but i do get by and i am trying, so be gentle with me. in simplistic terms.
I just installed Fedora this evening, and to date I've been unable to get my wireless to work. I've got a Dell Wireless 1397 WLAN Mini-Card, and to date I've tried...I have the driver and everything, but my wireless network just refuses to show up.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
Its a Dell Inspiron 1300 Laptop. 1.8GHz Pentium M, 2GB RAM, 160GB HDD, and some form of Intel graphics. The wireless card in question is a Dell TrueMobile 1300, with a BCM4306 Rev02 chip.Installed 10.04 LTS, updated it all on wired connection, then enabled the bcm43legacy drivers that were in the Hardware Drivers box, and it all worked fine. First thing I did was try to install some media codecs, and noticed they went slow on wifi, and swapped to the wired connection again. I thought it might just be slow servers, but I instantly got an extra 200kbps just by wiring. I try browsing the web, but its extremely slow and sometimes Firefox stops responding. I then begin to install WINE, and it complete stops loading, so I watch the net traffic when I hit a search in FF. Nothing goes out. I hit it a few times more, and finally it'll send something and receive something, but still VERY SLOWLY.
Its not a local problem, as other computers and laptops can connect fine with good speeds. Just wondering if this is normal, or if there's any other drivers to try, or if there's something I'm doing wrong here. I'm kind of a linux noob, but I'm for defs not a computer noob. But since I can't be guaranteed the drivers work with my specific card, who knows?
I am trying to get the Dell 1395 (Broadcom) wireless card to work on my PC and having a nightmare. I am certain the bulk of the reason is my inexperience with Linux but all the same it is causing me no end of problems.I have found the following sites which suggest ways to get it working
[URL]
Unfortunately I can't get either method to work on my Fedora 11 installation. I don't mean that I complete the steps only to find it doesn't work, I mean I can't even complete the required steps because I appear to be doing something wrong or be missing a crucial command tool.When I try to run the broadcom method I get as far as the make (or make clean) commands.
The make clean results in:
Code:
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean make[1]: gcc: Command not found make[1]: Entering directory `/usr/src/kernels/2.6.30.10-105.2.23.fc11.i586'
[code]..
If I try the other method I get into problems when I get to the ndiswrapper section as the install can't find ndiswrapper-common.
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
I have a Dell Latitude D800 with a Dell Wireless 1350 (802.11b/g) WLAN miniPCI Card. I need to install wireless on this laptop but I see no wireless card when I know I have the above wireless card. Here are some commands that I ran that I might prove useful:
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
I've recently partitioned off a section of my hard drive to run Ubuntu from and I'm having trouble with the network connections. In my device manager of Windows 7, it lists that my network adapters are
1. DW1520 Wireless-N WLAN Half-Mini Card
2. Intel(R) 82577LM Gigabit Network Connection
Is there something I'm not doing right in order to allow me to connect to a wireless connection? Are these devices even enabled in Linux systems?
I recently installed Ubuntu x64 on my dell studio 1535 using the windows installer (wubi).
All seems to be working fine apart from the built in wireless card, the proprietary driver (found in hardware drivers) installs and activates successfully and works perfectly. Until I shut down or restart the system. On the next boot the wireless card is 'disabled' and no longer works.
The card I have is a Broadcom Corporation BCM4312 802.11b/g
I am going to try a proper install on a second partition rather than using wubi later on but wondered if this was a commonly occuring problem?
The wireless card works as soon as the driver installs, however I am shown a "restart to activate driver" message and after restarting it's dead.
Just upgraded from Intrepid to karmic on my girlfriends Dell Vostro 1510 and the wireless stopped working. The drivers are installed and worked fine under intrepid. When I enter the hardware drivers utility it says that the driver is active but currently not being used.
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter b43-fwcutter-011-3.fc9.i386
I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
