OpenSUSE Wireless :: Wireless Will Not Connect Dell Inspiron 1440
Feb 18, 2011
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
I just completed installing openSuse 11.1 I followed the detailed steps given in Getting Your Wireless to Work When I try to scan for available APs in the vicinity, I get the following error.
~> sudo /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
Can someone guide me in configuring my wireless connection. Also, since I do not happen to have a wired connection, I am alternating between openSuse and windows everytime i need internet.
Dell Inspiron 640m laptop, running 10.04. It previously connected via wifi & now fails to connect, although the wireless indicator shows a connection. Connection via ethernet works. Below there's some information that looked like might it be useful to diagnose the problem based on other posts in this forum.
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
I have a Dell Inspiron 1545 with a Dell Wireless 1397 WLAN Mini-Card and a Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller, and I cannot for the life of me get the internet to connect. I've tried both wired and wireless connection. I have a PPoE connection through a Verizon FIOS Actiontek router I believe, though the PPoE part may be wrong, I had one five years ago when I first got their internet so they may have changed it. Point is that the ethernet and internet won't work, and without a working ethernet I can't fetch the right drivers for anything.
I had also tried plain ubuntu 10.04 and couldn't get them to work then either. It said 'disconnected' at first, and then said 'device not ready' There is no hardware switch but there is a key toggle. It doesn't seem to matter what state the wireless was in before booting into Ubuntu Studio, so I'm lost as to where to even start. Even though the network manager isn't there like in regular ubuntu, I assume there will be a simple way to connect to the internet once the drivers are found, right?
I've seen issues and read about fixing them, but usually it uses an ethernet connection to fix the wifi connection and, being new to linux (<50 hours worth of experience lifetime), all I managed to do trying to fix it myself was screw up the installation to the point where the laptop couldn't access the home folder and I had to reinstall. Other than that, I am usually very good at following instructions, as long as they apply to my laptop's issue I guess
The only other issue is minor, I can't seem to control the USB mouse I have, but the trackpad works fine so it's no big deal, probably a matter of downloading the mouse driver once the internet works.
Currently I do have internet access via the same laptop while booting Windows 7 (I installed Ubuntu Studio 10.04 on a 10GB Partition with the idea of using an external HD for most data storage).
Oh and it is a 64-bit machine, the Studio version I installed is 32-bit.
I did what i did before but cant decipher why it wont work. It did work after the initial kmod PAE install, but after the update and I assume kernel change it wont work.
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter b43-fwcutter-011-3.fc9.i386
I just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE. This one contains a Broadcom 4312 WLAN card
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
I read the thread about the b43-tools but the git command on there fails.
git clone [URL] Initialized empty Git repository in /sbin/b43-tools/.git/ fatal: [URL] not found: did you run git update-server-info on the server? I am assuming the server is them not me? I have installed the firmware per my dmeg request. And the firmware is installed correctly.
[Code]....
The card works it just will not connect. I think I have that rev 3 issue where I need to edit the SPROM but I can not seem to get the b43-tools installed.
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
I have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
I recently upgraded from 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
I recently upgraded from Ubuntu 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
if i press the function key(FN) and F2 wireless disables but it wont renable if i press the button combo again.the only way so far i have managed to reenable wireless was to reboot.
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
I've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
i have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
ifconfig
Code: eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2 inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
i installed Ubuntu on my whole hard drive its the only OS i am running i can not get my internal wireless card to work i have tried to follow the post i have seen on here about the same computer but how to install/program my wireless card so i can get on the internet .
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
I'm running on 11.04 on my Dell Inspiron 1764, and so far haven't been able to achieve internet access through either a direct wired connection or wireless.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running rfkill list all shows dell-wifi hard blocked no soft blocked no. The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code: linux-gkpt:~ # lspci -v 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Subsystem: Dell Wireless 1390 WLAN Mini-Card Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at efdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 2 Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
