General :: Taking Specific Ip To Local Webserver
Oct 21, 2009For some purpose in my home network I want to get a specific ip to my localhost on that machine.Like say I typed 123.123.123.123 I want that go to localhost.
View 3 Replies
ADVERTISEMENT
General :: Local Webserver Running Slow
Nov 2, 2010for some reason when we browse our website on our local webserver (test environment) the pages load very slow.
There is no lack of memory, no lack of disk space, no lack of CPU power and as far as I know our network is very fast.Don't know where to begin looking, any suggestions ?
General :: Centos With Apache Webserver - Change The Localhost.local?
Dec 27, 2010I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
Networking :: View Local Webserver From Xp Clients By Not Using Ip?
Jul 25, 2010Im a linux newbie and I'm some sort of creating an Internal webserver or Intranet for short locally. My local webserver ip address is 192.168.0.1 and when im trying to view this on my xp clients i will type it in the url 192.168.0.1. What im trying to do is view my webserver instead of typing ipaddress I'll type hmij.edu.ph for example and trying to resolve it locally through local dns resolution.. so every time i type for example. my webserver name hmij.edu.ph i want it to redirect it to my local webserver w/out going to the internet first.. I already setup dnsmasq for dhcp and dnsclient resolution. is there any better way on how i can achieved this??im a little bit of confused on how to make this work. tnx in advance!
View 13 Replies View RelatedSlackware :: Sync Local Folder With One On Webserver?
Feb 26, 2011What would be the easiest way to synchronize a local folder of images, recursively through sub-folders, with a remote folder of images over FTP?
View 7 Replies View RelatedFedora Networking :: View Local Webserver From Xp Clients By Not Using Ip?
Jul 26, 2010I'm some sort of creating an Internal webserver or Intranet for short locally. My local webserver ip address is 192.168.0.1 and when im trying to view this on my xp clients i will type it in the url 192.168.0.1. What im trying to do is view my webserver instead of typing ipaddress I'll type hmij.edu.ph for example and trying to resolve it locally through local dns resolution.. so every time i type for example. my webserver name hmij.edu.ph i want it to redirect it to my local webserver w/out going to the internet first.. I already setup dnsmasq for dhcp and dnsclient resolution. is there any better way on how i can achieved this?
View 5 Replies View RelatedUbuntu One :: Update Tomboy Notes From Local To Webserver?
May 1, 2010It's always update my local file from web server,which is not my want it.I have beem overwrited by web server many times.It's made me so mad.Is there any way to just only update webserver from local and keep my local files original?
View 1 Replies View RelatedSecurity :: Blocking Local Webserver For Internal Clients?
Sep 18, 2009I've small issue with blocking local clients. I mean I've webserver that I want to allow limited number to clients to that let say I've 10 users from 10.5.1.1-10 I would like to block 1-9 and allow only last client to access that webserver . Ive tried the following
Code:
iptables -A -p tcp -i eth1 -d 10.1.1.14 -s ! 10.5.1.10 -j REJECT
iptables -A INPUT -p tcp -d 10.1.1.14 -i eth1 -s ! 10.5.1.10 -j DROP
General :: Mount A Specific Directory On Server To A Local Windows Machine?
Jan 20, 2011I have a directory on my server at /home/dave/www/images/site (ext3) which I want to mount directly to my Windows computer so that I can transfer data easily via command line tool. Is that something possible?
View 4 Replies View RelatedDebian Configuration :: Apache - Cannot Access Webserver From Home It's Available Only Within Local Network
Aug 21, 2010I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedServer :: Accessing Internal Webserver From Public Webserver
Dec 18, 2009Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
Networking :: Applying Rules To A Specific Local IP?
Aug 9, 2009Is it possible to apply a rule to a specific local IP? For example lets say I have a two IP's assigned to my server, 1.1.1.1 and 2.2.2.2.;.I want to deny all connections going to 1.1.1.1 only asides from a couple of trusted IP's I will define.
View 1 Replies View RelatedDebian Configuration :: How To Assign Specific Local IPs In Home LAN Using DHCP?
Apr 29, 2011I have some beginner questions about DHCP, Avahi, and configuring a small home LAN.Suppose I have a dynamic IP address assigned by my ISP, which requires DHCP be enabled in my dsl modem/router/"firewall" [sic]. Suppose for simplicity I have just one PC behind the dsl modem.I think "enabling DHCP" in the modem/router means that a DHCP client runs on the router, which communicates with a DHCP server run by my ISP when I boot up a PC on my LAN. Is that guess correct? Can I get DHCP to assign a particular local IP, say 192.168.1.10 (which is not the one taken by the router--- for this discussion, let's say that is 192.168.1.0) to my PC each time I boot it up?
Now suppose I want to build a stand-alone firewall, so that my LAN will have the firewall and the first PC behind the modem, with the first PC virtually behind the firewall. By default, I think these will both have DHCP clients running which I need to configure properly. The firewall should also have a DHCP server which should control how local IP addresses are assigned, correct? I should try to arrange that the LAN has only DHCP server, only one NTP timeserver, only one DNS nameserver, correct?My first PC seems to have installed an autorun client called Avahi, which performs DNS multicast services and incorporates something called zeroconf which seems to have something to do with remote desktops, which I don't need and which is a potential security hazard. But it seems that Avahi is an intrinsic part of the KDE desktop and cannot be removed. Just want to be sure that Avahi can coexist comfortably with dhcp3-client, which is also installed on that PC. They perform different tasks, correct?If I can get the stand-alone firewall to work, I know I need to turn off the commercial firewall in the dslmodem/router/firewall device. Should I purchase a bridge and try to turn off the routing function also?
Networking :: Force TCP Traffic Out Over Specific Interface / When IP Is Bound To Another Local NIC
Aug 12, 2010I'm hoping some of the Linux network experts can help me with this problem.
Situation: I have a technology which is a WebLogic JEE application that communicates to an Oracle database. Everything is installed in a single Linux virtual machine running in VirtualBox. Traffic from the JEE application goes via JDBC over TCP to the local running database. What I want to do is test a new database firewall server that wants all traffic destined for the database to flow via another virtual machine running the DB Firewall software.So therefore want I need to do is have DB traffic forced out over one interface only to return on another interface on the same VM listening on a different address.
JEE application running in WebLogic bound to 192.168.111.12 (eth1 a VirtualBox hostonly interface). Makes a request for 10.0.111.12 (eth2 a VirtualBox internal interface) which the database is listening on. Because both IPs are on local interfaces, Linux is going to handle the traffic and not route the 10.x traffic via the 192.x interface.I also have running the database firewall server which has a bridge (br0) between the HostOnly network and the Internal network.Both systems are running Oracle Enterprise Linux R5U4, which is basically the same as RedHat.What I want to do is have the request for 10.0.111.12 forced out via 192.168.111.12, bridged over the br0 connection and back into 10.0.111.12 and to the database. My networking knowledge is pretty good, but i'm stuck right now on the right way to do this. I'm pretty sure it is possible, I just need clear advice.
Reason for setup: Ideally I would build the system with the database on a separate machine so that I can easily route the traffic. Unfortunately we have many VirtualBox based demonstration systems with both the application and database installed on the same VM and therefore the amount of work to migrate these two dual VMs is going to be significant, also many of these VMs are demonstrated from laptops which have limited resources and creating a new database VM reduces overall performance. If I can create a way to force the traffic in this manner off and back onto the same VM via the other VM bridge, it would be fantastic.
General :: Change A Specific Characters To Capital In A Specific Text?
Dec 2, 2010for example
else {
for fileDOC in $location/*.doc
do
[code]...
General :: Konqueror Updates To Local Files / Executing Local Binaries?
Dec 9, 2010One of Konqueror's unique features is that i can name a local process as the action in a form. When i submit that form, the local process is executed. Very helpful for certain offline tasks. What would make it even better is if i could find a way to pass some data to that local process from the html page. This could be the content of a hidden input item, etc. Alternatively, if there is a way for Konqueror to create or update a local file with data from the html page, that would acheive the same end.
View 1 Replies View RelatedGeneral :: Read A Local Man Page For Sync That Was Kept In The /usr/local/share/man?
Sep 27, 2010What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies View RelatedGeneral :: Yum Local Install - Package And All Dependencies In Local Directory?
Dec 9, 2009I am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
View 4 Replies View RelatedGeneral :: Having A Dns Server And Webserver On The Same Machine
Sep 3, 2010I have one desktop machine with fedora 11 installed and a Laptop with both linux and Windows Xp. I use the laptop as my client machine.
I want to set up both a dns and web servers on the same machine for testing and practise purposes.
how to do it bcoz I can set up the webserver but I can't browse the website on the Fedora machine when I use my laptop. I have learnt that I should set up a Dns server.
General :: Setting Up A Webserver In Ubuntu 9.10?
Sep 1, 2010i am planning to setup a Web server on AWS Cloud Platform.The requisites are
ubuntu karmic 9.10
Java - 1.6.0_20
Tomcat - 6.0.29
Apache - 2.2.14
Mysql - 5.1.41-3ubuntu12.6
Since i am not much familiar with Ubuntu,Shall i go for apt-get install or download source and compile each application.
General :: How To Optimize Ubuntu Desktop To Run Webserver
Jan 30, 2011I am using ubuntu desktop edition to run My drupal website on Intranet. I know for running web servers best thing to install is ubuntu server editions, but due to some problem i am using Desktop edition.I installed XAMPP on my machine an my website is up and running. I want to know how can i optimize my machine?? Since I will not use very less features of desktop editions are there any things which I can remove or stop which will free memory and cpu consumption, are there any packages which i should install to increase the performance of my ubuntu??
View 3 Replies View RelatedGeneral :: Good Tutorials To Create A Webserver?
May 24, 2010I was wondering is there any good tutorials on how to create a good webserver... i have found a few but i was just trying to verify the info on the ones that i found.
View 2 Replies View RelatedGeneral :: Remote Webserver And Sshd_config File?
May 5, 2011I wanted to add a user to have permission to login to our webserver. Foolishly I did not back this file up. The only thing I changed was the last part of the file which was:
# override default of no subsystems
AllowUsers chris acosentino
Subsystem sftp /usr/libexec/openssh/sftp-server
to
# override default of no subsystems
AllowUsers acosentino techmaster
Subsystem sftp /usr/libexec/openssh/sftp-server
Now I'm still connected with that terminal, but any other attempt to get into the webserver from either a new terminal or from winscp results in:ssh_exchange_identification:Connection closed by remote host.If I lose connection to this last terminal I guess I'll be screwed.
General :: Run A Program For A Specific Amount Of Time Starting At A Specific Time?
May 18, 2010I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies View RelatedGeneral :: Why Is Sudo Required To Start Up A Webserver On A Given Ip:port
May 28, 2011I'm setting up a Python-based webserver on my Debian box. Setup: The Debian OS is VM based, but I've switched the VirtualBox from NAT to Bridged. IP of the VM setup = 192.168.1.7 (per my router's admin screen or ifconfig). I've succesfully set up my router's port forwarding for both ssh and HTTP. I've successfully set up my router's dynamic dns using [URL].
Regardless of the specific Python webserver I'm using (Django, CherryPy, standard library), I have to start the webserver @ 192.168.1.7:80 using sudo. Otherwise I get an error about not having permission to access the port. None of the webserver tutorials mention needing to use sudo when specifying an ip:port.
Question: why do I need to use sudo to start these webservers? Is it an indication that I shouldn't be using 192.168.1.7? Or that I'm not setting a config file properly somewhere?
General :: Using The RHEL Server As Webserver And Database Centre?
Jul 12, 2011The issue is i am using the RHEL server as my webserver and database centre. Now its a brand new formatted server with good amount of RAM and the usage is not much. Its being accessed locally over the LAN. But still i can see speed deficiency. Some of the pages do not get loaded and some times i can see the delays in loading the new pages. Any idea y is it so? Or is there anything i can do to increase the speed?
View 3 Replies View RelatedGeneral :: Setting Up Centos As A Webserver With A Domain Name Purchased?
Jul 16, 2011I previously installed centos using DHCP. Now I purchased a domain name and want to set it up as a webserver. if I choose the static ip address based on the existing DNS server given to me by the domain company, it will ask for the subnet mask, default gateway and i do not have them.
View 6 Replies View RelatedGeneral :: Host Webserver: Connection Timed Out - No Servers Could Be Reached
Feb 17, 2011I have standalone Suse 10 SP3 that when I run
Code: # hostname webserver but when I run host command
Code: # host webserver;; connection timed out; no servers could be reached I would like to get the IP when I issue
[Code]....
General :: Taking A Screencast In Backtrack 4?
Mar 4, 2010I'm working on a tutorial using Backtrack 4 Live USB, and I would like to take a screencast of what I'm doing (not just screenshots)So far I have tried these application with limited success:-recordmydesktop -xvidcap -wink -istanbul -vlc -vnc2flvEach time I try the resulting files are generally choppy (at best 1 frame per second) and most don't even end up with a clear view of the screen each time.
View 2 Replies View RelatedGeneral :: Windows Taking Over From Grub?
Mar 24, 2010I'm trying to dual boot a server with Windows 2008 R2 and RHEL 5.4. I've done these dual boots 20 or more times in the last few months, and never had a problem. (This is the first time I've tried it with R2, mind you.) I do the normal install Windows on one drive, then install RHEL on another. The first time it reboots after the install (which is still part of the install, as it's my kickstart script prompting the install and it still has post to run), it goes to the grub menu, and I can select RHEL and it boots into it fine. After that, if I reboot it just goes directly into Windows, without seeing grub at all.
I've tried pressing esc, shift, various things in case it's hidden, with no luck (also, I have a 30 second timeout set and it's not sitting there that long). I've tried editing the grub.conf to remove Windows entirely, and it still just goes into Windows. I've reinstalled RHEL 3 times (yay for kickstart files!), and this exact behaviour happens every time. Does anyone have any idea of what might be going on here