General :: Good Tutorials To Create A Webserver?
May 24, 2010I was wondering is there any good tutorials on how to create a good webserver... i have found a few but i was just trying to verify the info on the ones that i found.
View 2 RepliesI was wondering is there any good tutorials on how to create a good webserver... i have found a few but i was just trying to verify the info on the ones that i found.
View 2 RepliesI plan to design a general framework for structural optimization.I already have a pre-processor module that I can call in batch mode, a Finite Elements Solver, and a heuristic non gradient based optimizer that can process the outputs of the solver, so as to adjust some input variables in the pre-processing phase ( geometry and topological definitions of my structure ).
I would like to parse the huge ammout of data that is released by the solver ( an ascii text file) to filter out some reauired results in some specific points ( maximum allowable deflections or stresses within my structure ) since it is this infoemation that will be fed to the optimizer engine so as to feedback on the quality of the changes made in the topological definition.The only way to do this in batch mode is with awk, or with sed..
Sites providing video tutorials on linux which are free to download. I've got one site "www.showmedo.com". Here I can get different tutorials on opensource like scribus, gimp, C++,python etc.
Can anyone provide me any other good sites like this?
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
I'm compiling gtk+-2.22, and while building, I get this error:
[Code]....
Is there a way around this, or can the building of docs be suppressed?
I tried to make a Debian netinst install disc. I tried two different computers with multiple settings. I also tried different brands of CDs. All resulted in corruption. I am using AT&T Broadband (if it matters). I also tried two different CD drives on the future Linux Box. What am I doing wrong?
View 14 Replies View RelatedI have one desktop machine with fedora 11 installed and a Laptop with both linux and Windows Xp. I use the laptop as my client machine.
I want to set up both a dns and web servers on the same machine for testing and practise purposes.
how to do it bcoz I can set up the webserver but I can't browse the website on the Fedora machine when I use my laptop. I have learnt that I should set up a Dns server.
i am planning to setup a Web server on AWS Cloud Platform.The requisites are
ubuntu karmic 9.10
Java - 1.6.0_20
Tomcat - 6.0.29
Apache - 2.2.14
Mysql - 5.1.41-3ubuntu12.6
Since i am not much familiar with Ubuntu,Shall i go for apt-get install or download source and compile each application.
I am interested in working with zfs fs's and I am looking for tutorials on the subject, I am working with the Centos distro, can you send some links my way.
View 2 Replies View RelatedI know there is a lot of information about it, but I'd like to get help of any developer who uses it.I'd like to learn to program in C++ (time ago, I programmed in C and Java).Questions:- A good tutorial? and Samples? - I've installed Eclipse Helios. Is a good tool for developing C++? - I use KDE. A tutorial for developing a KDE application? - Where to get more help: forum, chat.
View 4 Replies View RelatedI am using ubuntu desktop edition to run My drupal website on Intranet. I know for running web servers best thing to install is ubuntu server editions, but due to some problem i am using Desktop edition.I installed XAMPP on my machine an my website is up and running. I want to know how can i optimize my machine?? Since I will not use very less features of desktop editions are there any things which I can remove or stop which will free memory and cpu consumption, are there any packages which i should install to increase the performance of my ubuntu??
View 3 Replies View RelatedFor some purpose in my home network I want to get a specific ip to my localhost on that machine.Like say I typed 123.123.123.123 I want that go to localhost.
View 3 Replies View Relatedfor some reason when we browse our website on our local webserver (test environment) the pages load very slow.
There is no lack of memory, no lack of disk space, no lack of CPU power and as far as I know our network is very fast.Don't know where to begin looking, any suggestions ?
I wanted to add a user to have permission to login to our webserver. Foolishly I did not back this file up. The only thing I changed was the last part of the file which was:
# override default of no subsystems
AllowUsers chris acosentino
Subsystem sftp /usr/libexec/openssh/sftp-server
to
# override default of no subsystems
AllowUsers acosentino techmaster
Subsystem sftp /usr/libexec/openssh/sftp-server
Now I'm still connected with that terminal, but any other attempt to get into the webserver from either a new terminal or from winscp results in:ssh_exchange_identification:Connection closed by remote host.If I lose connection to this last terminal I guess I'll be screwed.
I can not get the touchscreen to with ubuntu 1010 netbook are there any tutorials? i googled around but didn't find what i was looking for
View 1 Replies View RelatedI am familiar with C, C++, and Python at a novice level. I have recently tried learning bash, but I can't seem to wrap my head around it. My biggest problem, I think, is the huge "vocabulary"-- it seems like there are thousands of commonly used commands, and several ways to use said commands.I've done some google searches but can't seem to find scripting tutorials that tailor to n00bs. Most go from basic "Hello World" programs to very complex scripts.
View 5 Replies View RelatedI'm setting up a Python-based webserver on my Debian box. Setup: The Debian OS is VM based, but I've switched the VirtualBox from NAT to Bridged. IP of the VM setup = 192.168.1.7 (per my router's admin screen or ifconfig). I've succesfully set up my router's port forwarding for both ssh and HTTP. I've successfully set up my router's dynamic dns using [URL].
Regardless of the specific Python webserver I'm using (Django, CherryPy, standard library), I have to start the webserver @ 192.168.1.7:80 using sudo. Otherwise I get an error about not having permission to access the port. None of the webserver tutorials mention needing to use sudo when specifying an ip:port.
Question: why do I need to use sudo to start these webservers? Is it an indication that I shouldn't be using 192.168.1.7? Or that I'm not setting a config file properly somewhere?
The issue is i am using the RHEL server as my webserver and database centre. Now its a brand new formatted server with good amount of RAM and the usage is not much. Its being accessed locally over the LAN. But still i can see speed deficiency. Some of the pages do not get loaded and some times i can see the delays in loading the new pages. Any idea y is it so? Or is there anything i can do to increase the speed?
View 3 Replies View RelatedI previously installed centos using DHCP. Now I purchased a domain name and want to set it up as a webserver. if I choose the static ip address based on the existing DNS server given to me by the domain company, it will ask for the subnet mask, default gateway and i do not have them.
View 6 Replies View RelatedCollection of Tutorials on lisp. [URL]
View 1 Replies View RelatedI have a ps3, and I want to put Fedora Core 11 on it. But i don't know how. (i've already downloaded the Fedora Core 11 PPC)I can't find tutorials for the install of this version. (Sorry, I don't speak english very well) In my PS3 , I used Yellow Dog Linux (it is too slow, and bugged), Ubuntu 8.04 (lol, it dont support HD resolutions).I use my PS3 in the same monitor of my PC. (). 22" LG Monitor.
View 3 Replies View RelatedI am a moderately skilled windows user with some dos knowledge that has just transitioned my PCs over to Ubuntu. this is the first time I have had ANY exposure to Unix/Linux. I am looking for some literature or video tutorials that will help me transition to Ubuntu. The basic functions are so similar to windows and mac OS X that I am moving easily around the desktop, but I want to go deeper. I want a little history of how we got from Unix to Ubuntu but quite honestly I don't know what I can do with what I have.
View 9 Replies View RelatedI tried searching for tutorials bout could never figure out MVC.
View 13 Replies View RelatedI have standalone Suse 10 SP3 that when I run
Code: # hostname webserver but when I run host command
Code: # host webserver;; connection timed out; no servers could be reached I would like to get the IP when I issue
[Code]....
I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I'm currently looking at a Mac Terminal tutorial:[URL]... I want to learn about Linux Terminal, is there a difference between the Mac Terminal and Linux Terminal commands and Internet tutorials?
View 1 Replies View RelatedI want to learn Java programing language and MySQL in linux.What packages do I've to install?Are there any sites providing basic tutorials of java and MySQL?
View 1 Replies View RelatedI've developed a tiny webserver for home automation out of an ALIX 1D, and based on a debian lenny. It runs very smoothly and is now able to operate quite a lot of different equipment from a webapp. But i'm not sure how I should handle the compact flash, regarding read/write limitations. From what I've read the partitioning should be ext2, which would disallow the journalisation of the system. A utility to 'flatten' the repartition of write cycles exists, would it be relevant to use if the partition is ext2 ?
I will also disable all logging in execution mode (a debug mode will provide the logs). Is there any other parameters I have to take into account for maximum reliability (i.e. does the system randomly write in some files for various and potentially turned off purposes)? As for the mysql database, it's not important data, and it's actually reconstructed every time the server boots. Given this, is there a way to store the db in RAM rather than in a file? I'm not sure it's the right place to ask, but I sometimes see redirection to here from stack overflow.
i am running into few problems with the script here. I have an FTP server, all configured, and i need to have a script that will create a folder with current dated within a tree as soon as particular user logs in. I was wondering if that is possible with proftpd. if not, can someone suggest how to create a script that will simply create a DIR with date and autorun itself every 24 hours? i am running Debian/Proftpd with Mysql authorization.
View 14 Replies View RelatedI've been thinking about picking up a subscription to Linux Journal and maybe Linux Pro. Are there any other good Linux mags out there? Only other one I've read much of was Linux Format, which kinda felt like it was mostly just an anti-MS fanclub.
View 2 Replies View Related