General :: Not Booting Correctly Into SuSE 10.3?
Feb 4, 2011
"Something" happened to my friend's computer, and now he somehow expects me to know how to fix it. Sigh.The symptoms: There are two partitions - a Windows XP partition and a larger partition for SuSE 10.3 it seems. He can boot into the Windows, but not into the SuSE anymore. However, he can boot using the Fail-safe method.
I know this is very vague. but I can't get to the computer at present to check things for myself. Do any of you know what a possible cause of these symptoms could be and how to fix the problem?
View 15 Replies
ADVERTISEMENT
Jul 29, 2011
I am having trouble booting off a cdrom using isolinux. I see the isolinux prompt and it seems to boot but I run into:
RAMDISK: incomplete write (-28 != 32768 ) 131072000
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2)
I can't seem to get much debug information either other than the two lines. What do you think I have a problem with?
View 1 Replies
View Related
Jun 7, 2011
I have been using Ubuntu for about a month now. I have the latest version, 11.04. Today, I was watching and downloading movies on Miro and while I was watching, the screen froze and I couldn't get it back to normal. I manually shut down the computer and when I turned it back on it brought me to a page that reads code...
I do not know what to do from here or what the problem is, I was thinking maybe one of the movies I downloaded caused the problem because it happened right when I was downloading. Any help is appreciated, I really want to have my computer working again.
View 6 Replies
View Related
Apr 1, 2010
i just installed OpenSuse 11.2 whiteout problems, once finished i reboot my eeepc, but the startup stops at :
Code:
Starting udevd:
Loading drivers, configuring devices
View 9 Replies
View Related
Nov 12, 2010
I just finished up a Clean install of Suse 8.2 (from BOXED set I bought back in the Days-from Best BUY.) everything seems to have gone well. I set the DMA on my ide drives ok. Under Yast ,it did have K3B RECOGNIZE MY cd-r iomega ZIPCD1024INT-A , it says it is recognized as acdwriter ,but when I go to k3b disk copy function,the whole cd copying process stops ,saying my cd-rom is not cdrDAO compatible. WHAT is going on???? Is this CDwriter too old for this Suse 8.2???
View 1 Replies
View Related
Nov 16, 2009
I am currently running openSUSE 11.2, but I do not like the KDE4 interface. I downgraded everything back to KDE3, but kept the KDE4 artwork. The NetworkManager program under KDE4 works fine and can connect to my home wireless network. However, The previous of NM cannot cannot connect to any wireless network.
I find it kind of odd, since KNetworkManager is just a frontend to the real NM, with was not actually changed when I downgraded.
View 3 Replies
View Related
Mar 26, 2010
After installing cpq_cciss-2.6.14-7.sles9.x86_64.rpm on HP DL385, the server did not boot at all. It was hanging on code...
The server was also hanging on Failsafe, Linux and HP-initrd-2.6.5-7.191-smp
So I decided to jumpstart the server with the disks installed as it was, but it was also hanging on:
Loading kernels sles9_amd64 initrd
Ready.
When I installed the cpq_cciss-2.6.14-7.sles9.x86_64.rpm, the output is attached:
Did anyone have similar issue? Do you know how to boot the HP Linux DL385 with Non-RAID as it was hanging on Slot 0 HP Smart Array 6i Controller (64MB, v2.6 1 Logical Drive.
View 5 Replies
View Related
Apr 5, 2011
I installed OS Suse linux 10 with SP3 through BFS. After installation when it rebooted throughing an error :
resume device /dev/disk/by-id/scsi-xxxxxxxxxxxx-part1 not found (ignoring)
waiting for device /dev/disk/by-id/scsi-xxxxxxxxxxxx-part3 to appear .......... not found -- exiting to /bin/sh
$
View 1 Replies
View Related
Aug 15, 2010
i currently have a Macbook and would like to install it there as a duel boot with OSX.
Tried to get it going using bootcamp but its just annoying me now, do i have to install windows first before installing Linux or is there another way around this since i need a authentic version of windows, to which i will never use i just want the linux and OSX running.
View 3 Replies
View Related
Sep 21, 2010
I have a multiboot system chainloaded by SUSE grub. I have installed CENTOS on an extended partition thrice with various grub install options available in install media. I am unable to chainload CentOS with SUSE grub or PCLinuxOS grub.
Here is my menu.lst -
# Modified by YaST2. Last modification on Mon Sep 20 05:43:13 SGT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
[Code]....
How do I get CentOS to boot from openSUSE 11.2-11.3 grub.
View 3 Replies
View Related
Mar 1, 2010
I'm fairly new to Linux so I'm going to need a step-by-step guide to get me out of this rut. The install of Linux was fine but when I booted up I got this error. VFS: Cannot open root device "302" or unknown-block (3,2) append a correct "root=" boot option;here are the available partitions;
0800 78150744 sda driver:sd
0801 47428608 sda1 <-- this is my Windows partition
0802 30719552 sda2 <-- this is my Linux partition
0b00 1048575 sr0 driver:sr
0b01 1048575 sr1 driver:sr
Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (3,2) I guessed from reading this error Lilo isn't pointing to the right partition to boot from? How will I fix this? I read another thread about boot problems on these forums and a guy said to do this:
#mkdir /slacktemp
#mount /dev/device /slacktemp
#chroot /slacktemp
#cd /slacktemp/etc <-- for me it told me that doesn't exist
#vi lilo.conf <-- couldn't do nothing and was frozen
#lilo -v -t -b /dev/device
#lilo -v -b /dev/device
The above solution did not work for me. Can anyone shed a light on a Linux rookie?
View 14 Replies
View Related
Aug 26, 2010
I have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
View 8 Replies
View Related
Jun 25, 2011
I am seeing a udev error message on booting that I have not seen before with LInux and which I cannot interpret. My Suse 11.4-KDE installation is fairly new. My system is a System 76 PanP4 Pangolin that originally ran Ubuntu.Uname -a returns: Linux linux-zcga 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 x86_64 x86_64 x86_64 GNU/Linux. My video is a Geforce 9300M with an nVidia driver.A Google search turns up the fact that similar error messages have been reported with Fedora, Ubuntu, Meego and Gentoo. These frequently have had something to do with sound and in at least one case the advised correction was to reinstall udev. I can see where bugs were filed but with no clear response. Some of these go back several years, the most recent is within the last few months. I did not see a posting that involved Suse.
1.Can someone tell me what these error messages mean?
2.Does this pose a problem?Everything seems to work normally on my system once I am through the boot process.
3.If this is a problem how does one fix it?
View 5 Replies
View Related
Nov 26, 2009
I installed HP multifunction inkjet printer.Since then, I'm always noticing the blue HP HPLIP servicestatus icon in the system tray. It appears that I can onlyhide or quit it once it has started.Is there a way not even have it started from the system booting?
View 1 Replies
View Related
Dec 7, 2008
The suse 10.0 64 bit partition on my box stops booting when it is setting up the cmos clock. The suse 10.0 32 bit partition boots up without a problem. I never had a problem with the suse 10.0 64 bit partition up until now. Is it possible to fix the problem using puppy linux and editing a configuration file? I do not think it is a hardware issue if the other partition on the drive boots up. Would puppy linux be a good way to backup files from this partition or can I mount the partition using the 32 bit os?
View 1 Replies
View Related
Feb 24, 2011
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies
View Related
Jun 1, 2011
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies
View Related
Jan 6, 2011
I am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
View 5 Replies
View Related
Feb 13, 2011
Is it possible to install rpms from SuSE 8.2 pro to run on SUSE 11.2 x86_64. I mean games and simple applications not system files.
View 1 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Feb 15, 2011
Trying to upgrade my installed SUSE 9 version to version 11 but am having trouble.Do I need to delete the earlier version first and do a clean install
View 3 Replies
View Related
Jun 21, 2010
he $g09root is picked up ( in both the csh and the bash), but not the $GV_DIR or the $GAUSS_SCRDIR. I guess it's some stupid error, but it is highly frustrating.Here is the .profile file:Quote:
# To make use of this feature, simply uncomment one of the lines below or
# add your own one (see /usr/share/locale/locale.alias for more codes)
#
[code]...
View 9 Replies
View Related
Jul 6, 2011
I've installed CFEngine from source (for those of you who aren't familiar with the product, check out the wiki page) on an AIX server. I had some issues setting it up but finally got it to gmake successfully.
Once I run gmake install I get a very short output (based on other source builds) and no errors. I figure something is fishy and I now I need to figure out a good way to find if it was correctly installed. I tried:
find / -name cfeng* 2> /dev/null
Is there something analogous to rpm -qa | grep cfengine?
Here is a copy of my output in case anyone needs: [url]
View 1 Replies
View Related
Apr 19, 2010
I am using vim for opening and editing my source code, but the problem concerned japanese fonts is occurred. Japanese text can not be shown correctly (not japanese) by using vim.
View 5 Replies
View Related
Jun 19, 2010
I have installed both Fedora and Ubuntu with Gnome Desktops and it displays the information an inch to the left, this problem may have to do with the fact that the display comes up as unknown.
View 1 Replies
View Related
Aug 20, 2010
I have the following command:ssh $USER@$HOST "ls /ops/pkg/ec/`grep "PKRTS" /ops/pkg/ec | awk '{print $1}'`* > /tmp/tmp_file"What the above SHOULD do..is, ssh to the host then execute the command.The command should first execute the grep and awk between the back ticks, and generate a file name, then ls using that filename* and write that data to a temp file.However, it executes the grep and awk before even SSH'ing and the command that goes to the server is simply an "ls /ops/pkg/ec/* > /tmp/tmp_file" since the grep and awk return nothing on the local machine.
View 1 Replies
View Related
Jul 4, 2010
I have installed Arch and all is well. startxfce4 gives me a working desktop but when I log out, everything fails. The monitor goes black and I can't get into another tty. I have to power off the computer the "wrong" way and boot again.
The video card is an Intel 82845G/GL Brookdale integrated.
Not sure what to do next.
View 1 Replies
View Related
Jan 29, 2011
I've recently brought a Western Digital Elements 2TB external hard disk and have been planning to encrypt it for use as a backup drive. However, it seems that these 2TB disks use the new 4K sector sizes and thus need to be handled more carefully than the older 512K ones.
After spending a week looking on Google, I have to admit I'm pretty confused and hope somebody here might be able to verify my conclusions
The drive reports that it's a 512-sector drive which is probably false. Using fdisk -uc, the original partition starts at sector 2048 so I assume that is a valid sector also to start a dm-crypt partition overwriting the previous one?
I've also read that every layer that is added to these drives must support the 4k layer. That means both dm-crypt and the ext3 filesystem I intend to put it on have to do so also.
Looking through the cryptsetup document, it states under the option "--align-payload" the following:
"Align payload at a boundary of value 512-byte sectors. This option is relevant for luksFormat. If your block device lives on a RAID, it is useful to align the filesystem at full stripe boundaries so it can take advantage of the RAIDs geometry. See for instance the sunit and swidth options in the mkfs.xfs manual page. By default, the payload is aligned at an 8 sector (4096 byte) boundary."
The fact that the payload is aligned at 4096 seems to indicate to me that it should be fine using default settings. Does everybody agree with this? Or do I need to take special measures due to the dm-crypt headers?
When I later finish up the dm-crypt layer, then I need to put ext3 on it. I understand adding -b 4096 to the mkfs.ext3 command will resolve that. Is that also correct and will it work well in combination with the dm-crypt layer?
View 4 Replies
View Related
May 29, 2011
I use debian 6.0.0. I have installed scim scim-m17n scim-gtk2-immodule m17n-db im-switch. I can write hindi fine in browsers & gedit using transliteration. In vim I see that matra & letter are not positioned correctly. Here is screenshot post.jpg. I am using 'Akshar Unicode' . 'Monospace' does not help either. Otherwise , what font you use?
View 6 Replies
View Related
Jun 21, 2011
I need to know particular mount point mounted or not before send data to that mount point.Are there any commandsi used this command. mount -t nfs 172.16.102.50:/root/ESSR_share /root/shared_storage/pc50 -o rw,hard,intr but it take long time (when machine(172.16.102.50) is not available)
View 4 Replies
View Related
