I just installed Ubuntu on my 2009 HP netbook, which has a Broadcom 802.11b/g WLAN. It is now a dual boot, with Win XP, which is still able to connect to my Sprint 3g/4g mobile hotspot. My iMac also has no problem connecting to the hotspot. How do I configure Linux to detect the wireless network? I copied the Broadcom driver (while in XP) to a flash drive, but I can't open it in Linux.
View 13 RepliesI am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI wish to install a C++ plugin for the Eclipse IDE.I have Fedora 10 installed.I goto:
1. System-->Administration-->Add/Remove Software
2. I type 'eclipse' in the seach box and hit 'Find'.
3. From the list of packages available I select 'Eclipse C/C++ Development Tools (CDT) plugin.
3. When I hit 'Apply' I get an error message saying 'No Network connection available' The 'more deatils' tells me: 'Cannot install when offline'
But my computer IS online. I have internet access etc.
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedCurrently my new server pc (Mobo - ASRock H97M-ITX/AC) is not connecting to the network and it seems to be due to the network card alx drivers. I have downloaded the compat drivers and backports associated with the issue in other posts and on other forums but haven't been able to get it running.
When I install a usb drive of any type to try and transfer the drivers over I get the messages "443.057769 sd 7:0:0:0: [sdb] Assuming drive cache: write though" & "443.057769 sd 7:0:0:0: [sdb] No Caching mode page found".
I have been looking around these forums and google for the past week or so and have tried re-installing and alternative hardware etc. with no luck.
Version 11.2 worked all right. After installation of 11.3 the internet can no longer be reached. I formatted the system partition but not the home partition.Here is the shortened output of the script netinfo:
Code:
Linux kernel: Linux 2.6.34-12-desktop x86_64
LSB Version:n/a
[code]...
I have been uninstalling, reinstalling, .... for about the past 14 hours and finally I realize I need help. First, I am trying to install the latest Ubuntu 10.04.1 (64-bit) on a Windows 7 laptop (HP Pavilion).
I did have 10.04 running for a few months on this laptop but when I recently upgraded to ver. .... 32-24 things started to go wrong. Suddenly, I could no longer even bootup Ubuntu ...32-24. But, I was able to use ...32-23 or ...32-21 which were also on my machine. Then in trying to fix ...32-24 all my installed versions of Ubuntu 10.04 became unbootable. I tried many suggestions (see my postings on this yesterday and today on the Ubuntu forum -- General help) .
I realized that this was hopeless after many attempts. I could not bootup, even from my bootable Ubuntu CD. I then decided to just begin from scratch and install the latest downloadable Ubuntu --- I started with this early this morning. This went rather smooth; but, no matter how many reinstallations I did, I could never make a wireless connection to the network. Note, the same wireless hardware and settings were used as in the previous working versions of Ubuntu 10.04 and Windows 7 (on the same machine) --- I have not made any hardware changes.
I am sending this message from my desktop PC which has Ubuntu 10.04 (32-bit) and again, I have carefully checked and verified that the setting for my wireless connection to the internet are identical for both (this desktop and my laptop). However, I am still unable to make a wireless network connection on my laptop!
What can I do to get my wireless network working on my laptop with the latest download of Ubuntu 10.04.1? It could be that this latest download of Ubuntu 10.04.1 does not have the necessary drivers/software for the wireless network. But, it was ok in the previous downloadable --- I had been using it for a couple of months with no problems at all. Is it possible to reinstall 10.04 vers. ...32-23 rather that 10.04.1 vers. ...32-24? I could not find this on the Web.
Im trying to install fedora 11 full from the multiple cds and it fails on cd1 after fedora cant find a network connection and forces me to configure it via dhcp or manual ips."This requires that you have an active network connection during the installation process. Please configure a network interface"
"No Network Available Some of your software repositories require networking,but there was an error enabling the network on your system".my mb is an asus: a7n8x deluxe with a 3com and nvidia lan chipsets.
I have Fedora 10, and today I finally had an opportunity to let the automatic software updates run. At the end it said to restart the pc. I restarted and now it won't connect to the network. What do I do to get it connected again?
View 5 Replies View RelatedIt may have something to do with my recent installation and removal of tor, but I can't narrow down when exactly it began. I'm getting no better than about 5000B/s download rates for apt. This means just a download of the package list takes a good 5 minutes. Other networking seems to run fine, but synaptic and apt are crawling.
View 5 Replies View Related'tried 5 or 6 solutions on the different threads on hplip - none seem to affect the download of the plugin - always 'no network connection detected'.'Running Lucid on a Dell Optiplex 755 w/ an HP1020. The printer appears to be recognized - show up on admin/printer
View 9 Replies View Relatedwhen I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies View RelatedI have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies View RelatedI tried since yesterday to get a VPN-connection but it seems that until now I'm not able to reach the Company-network. Our company use the pptp connection. I tried many different setup's but without sucess. I use Ubuntu 9.10 and installed the pptp-manager.
Following settings:
Gateway (set)
Username (set)
MSCHAPv2 (check)
Point to point (check)
Stateful (check)
BSD (check)
Deflate (check)
TCP (check)
Below you find the result from the syslog, what can I do now?
Code:
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:950]: PPTP_SET_LINK_INFO received from peer_callid 0
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:953]: send_accm is FFFFFFFF, recv_accm is FFFFFFFF
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 warn[ctrlp_disp:pptp_ctrl.c:956]: Non-zero Async Control Character Maps are not supported!
Mar 14 13:03:58 snofla-desktop pppd[2759]: Connection terminated.
Mar 14 13:03:58 snofla-desktop NetworkManager: <info> VPN plugin failed: 1 ......
where i can edit the network connection in LXDE desktop? i dont found this option.
View 2 Replies View Relatedi installed a linux flavor (Ubuntu 10.04 LTS, Ubuntu 11.04, and then Linux Mint).. They all gave this same problem about the wired network (see the picture). The connection seems to be fine but i can't connect to internet or even to my router. Which is weird since it knows my router IP 192.168.1.79. Wasted the whole night trying to figure it out but i just can't understand why. I have a separate partition on this computer to run Win7 also and confirmed that the network connection is working.
View 9 Replies View RelatedI am running upgraded Ubuntu 9.10. As administrator i want to take out of common users panel the 'network connection' tool because anybody can too easily disconnect me from the web. How's the trick, ?
View 3 Replies View RelatedI am running Debian Squeeze on my net book ( ASUS 1000PE ) with an Atheros wireless nic. It has been running fine for months automatically connecting during boot to my hidden network but all of a sudden no dice.
If I use the Gnome network manager and "connect to a hidden network" and I am all set but when I am at the command prompt ( which is how I have it set to boot to) it is a few more steps. How can I get it to automatically load. I did not have any scripts set up before so I assume it is a service I need to turn back on that was turned off in error.
Doing a fresh F12 install on a Dell Vostro 430. Machine needs to have 2 Network adapters for our setup.The install seems to go just fine but the on board network adapter doesn't appear to get detected/configured. If I look in /etc/sysconfig/network-scripts all I find is ifcfg-eth0 and ifcfg-lo. Looking carefully at ifcfg-eth0 I see it's the second card that I've put in the machine.As a test I removed the second network card and did another fresh install of F12. This time in /etc/sysconfig/network-scripts all I have is ifcfg-lo. When I go to system>Administration>Network Device Control I see no network devices displayed.
Is this an issue others have seen with F12 or is it possible my on board network adapter has an issue?BTW I did check the BIOS to be sure that Onboard Lan was enabled and it is.output from "lspci -k " with both cards installed on machine (I only listed Ethernet controllers)
I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :
Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :
Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes
Then, I restart network service, but eth0 is down, no device found for the connection eth0.
I just installed 10.04 64 bit to a windows 7 64 bit. After the install wubi works fine (except it hangs for like 1 minute saying Try hd(0,0) NTFS5: no wubildr), but windows 7 cant connect to the internet anymore. if i run ipconfig, it lests my ethernet adapter, but says that no network connection avaiable, the troubleshooter advises to plug in my ethernet cable. (it is plugged in, the net from ubuntu works fine.) Heres the output from lspci, dunno if helps:
[code]...
How could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedI recently (like yesterday) decided to put linux on my laptop because I'm annoyed with windows. However after formatting my hard drive I seem to have an error message at the same point in windows xp and linux when attempting to log on. I have abandoned windows completely and intend to only run Linux on my laptop however after I type my password the following message pops up:
There was an error setting up inter-process communications for KDE. The message returned by the system was:
Could not read network connection list.
/home/jtb360/.DCOPserver_Josh Laptop__0
Please check that the "dcopserver" program is running!
I have attempted to delete the only dcopserver file I can find and ran some suggested commands at the command prompt (I haven't used one since Windows 3.1) to remove an ICE file in hopes that it would recreate the file and run properly after reboot and neither effort prevailed. My next step is dropping it from escalating heights until it either works or dies.
I have been having difficulty with my BT Broadband over the last few weeks, it has now been resolved, but I can no longer connect to either my home network or the internet from my laptop though when I re-installed windows 7 the connection was automatic. I can see the link but can't connect.I also dual boot Vista with Mint 8 Helena on my desktop box and cannot connect Helena to either the network or the internet. My router is a BTHomeHub2 and it was recently suggested that it could be being blocked by BT!
View 1 Replies View Relatedi have a wired connection thru a netgear router wgr614, i am running a window machine fine , but ubuntu machine say no connection . i have look around seems to be a common problem . but no simple fix . Network manager is bad , do i uninstall or change thru terminal or .....
View 12 Replies View RelatedI have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
I'm using Scientific Linux on a laptop, connecting to a debian server on my LAN via a basic BT HomeHub router. When starting a file transfer with ftp or rsync from the laptop my connection is dropped, every time, after a couple of seconds. I have to reset my network adaptor and restart my network manager (wicd in this case) in order to get network connectivity back. I had a very similar problem before - [URL]. On this occasion my workaround was to replace NetworkManager with yast. I am now using SL though so no yast available, and I am not using NetworkManager any more anyway.
View 3 Replies View RelatedIn my case, it occurs intermittently when trying to connect using putty's command line client 'plink.exe' to a linux machine using ssh. For some testing purposes, a linux server is setup with 8K virtual ip addresses and the testing scripts will connect to these ip addresses through ssh using plink.exe. There will be concurrently 25 ssh sessions launched to the server. While it works for sometimes, it throws 'server unexpectedly closed network connection' error intermittently. If the same ip address is tried again manually, it works. While the ssh server is accepting connections, this error is thrown sometimes and unable to find out the reason from the logs. It is not that the ssh connection is completely blocked. It gives this error message while connecting to some of the virtual ip addresses but works some times.
The hosts.deny, sshd_config are tuned to allow the connections, allow more sessions etc.
how to get my wireless connection to work on the network. I don't see anywhere to go to see if the wireless adapter is even setup in Fedora. My other question is when I boot up and get the options to select the OS the first one is Fedora but the other one says it is other.
I think that is is booting up the recovery partion of Windows. I don't know how to change it so that it is looking at the correct portition. I know it has something to do with the menu.lst file but when I try to open it says that I do not have premission. I am not sure where to go to edit it.