I am running upgraded Ubuntu 9.10. As administrator i want to take out of common users panel the 'network connection' tool because anybody can too easily disconnect me from the web. How's the trick, ?
View 3 Replies
I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View Relatedi have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.
View 2 Replies View RelatedI tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI wish to install a C++ plugin for the Eclipse IDE.I have Fedora 10 installed.I goto:
1. System-->Administration-->Add/Remove Software
2. I type 'eclipse' in the seach box and hit 'Find'.
3. From the list of packages available I select 'Eclipse C/C++ Development Tools (CDT) plugin.
3. When I hit 'Apply' I get an error message saying 'No Network connection available' The 'more deatils' tells me: 'Cannot install when offline'
But my computer IS online. I have internet access etc.
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedI have my box setup as a router/NAT with two different network cards. One for external connection(connected to the Cable Modem) one for internal connection(used for internal DHCP). It works perfectly when I manually activate the two interfaces after booting(both interfaces always show up as inactive after booting), then the DHCP server and firewall. I am confused, however, by which program has control of these interfaces.
First, there is the Network Configuration (System->Administration->Network), which is where I manually start the interfaces after rebooting. Both interfaces are set to "Activate when computer starts" in here.
Second, Network Device control(System->Administration->Network Device Control), which looks to be almost the same thing as the above.
Third, the NetworkManager applet(on the top bar) - both devices show up as unmanaged when I left click on this, but if I set "Controlled by Network Manager" in the "Network configuration" window(number one above), It still does not work. Can I get rid of two of these programs, or is there some way to edit the startup scripts to start my ethernet cards before the dhcp server/firewall(which is shorewall BTW)?
My computer for a project I'm working on will be using Ubuntu with Perl and VLC from the repositories, if that matters at all. I'm not sure what I should/could use to accomplish this, but essentially I'm looking for Perl to be able to send predefined data via a serial connection based on the time within a song that VLC is playing.
A couple of the things that I've thought about after Googling a bit are SMPTE and subtitles/lyrics; I can't stop thinking that there's got so be a simple way that I'm just overlooking, though - most of the stuff I've found is for over-the-network applications, and that's overkill for this situation. All the subtitles/lyrics would have for text is hexadecimal values; all the SMPTE would do is keep Perl and VLC (playing audio) in-sync with each other. I would need either one or the other, but not both. Or, I could use something else...
I'm envisioning something like the setup below, I just don't know what else I need to make it happen.
Files:
song.mp3
timing.txt
script.pl
When I run "./script.pl song.mp3 timing.txt", VLC will open, and start playing "song.mp3", and the variable "$mils", for milliseconds elapsed, will be equal to zero. For each line in "timing.txt", the "script.pl" will assume the portion before an underscore is the "$time" for that line (time in milliseconds), and "script.pl" will assume that the portion after the underscore is the "$data", a three-byte hexadecimal value (such as "ff101f", or "011c00"), for that line.
I think that I will need to use two arrays, "@time" and "@data", such that the given line in "timing.txt" would read the same as printing: "$time[$line]".'_'."$data[$line]"."
" (if "$line" is the line number). My problem: jitter/stuttering playback. If VLC stumbles (which it sometimes does), and is a about half a second behind where it "should" be, but Perl didn't stumble, then I've got an out-of-sync issue.
Since Perl can't just count the time by itself to avoid synchronization issues, I've got two main ideas for getting this done: One way: Perl has to "read" where VLC is at, and use that as the "$mils" value. Then, if VLC delays/stubmles, so will Perl, but everything will still be in-sync. Alternative way: VLC has to "listen" to what Perl says "$mils" is at any given moment, essentially having Perl be in control of VLC's timing. This would make VLC "skip ahead" (to where it "should" be) if it starts to fall behind, thus keeping the two in sync.
I don't know which, if either, of these ways is best for my particular need. I would need "script.pl" to send "$data[$line]" over the serial connection when "$mils" == "$time[$line]". I already know how to send serial data from Perl, read files via Perl, and convert the hexadecimal number (if needed). I don't know how to "link" Perl and VLC so that they stay synchronized, and I am quite lost as to where to go from here.
I am running Debian Squeeze on my net book ( ASUS 1000PE ) with an Atheros wireless nic. It has been running fine for months automatically connecting during boot to my hidden network but all of a sudden no dice.
If I use the Gnome network manager and "connect to a hidden network" and I am all set but when I am at the command prompt ( which is how I have it set to boot to) it is a few more steps. How can I get it to automatically load. I did not have any scripts set up before so I assume it is a service I need to turn back on that was turned off in error.
I just installed Ubuntu on my 2009 HP netbook, which has a Broadcom 802.11b/g WLAN. It is now a dual boot, with Win XP, which is still able to connect to my Sprint 3g/4g mobile hotspot. My iMac also has no problem connecting to the hotspot. How do I configure Linux to detect the wireless network? I copied the Broadcom driver (while in XP) to a flash drive, but I can't open it in Linux.
View 13 Replies View RelatedI have setup my linux fedora server and i want to restrict access to my server.Basically i control using iptables.I'm not sure how to write an iptables rules to control drop all connection to port 8080 and allow only certain ip can access the instance on port 8080 example ip=10.254.14.16,192.168.1.10.
View 3 Replies View RelatedHow could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedI recently (like yesterday) decided to put linux on my laptop because I'm annoyed with windows. However after formatting my hard drive I seem to have an error message at the same point in windows xp and linux when attempting to log on. I have abandoned windows completely and intend to only run Linux on my laptop however after I type my password the following message pops up:
There was an error setting up inter-process communications for KDE. The message returned by the system was:
Could not read network connection list.
/home/jtb360/.DCOPserver_Josh Laptop__0
Please check that the "dcopserver" program is running!
I have attempted to delete the only dcopserver file I can find and ran some suggested commands at the command prompt (I haven't used one since Windows 3.1) to remove an ICE file in hopes that it would recreate the file and run properly after reboot and neither effort prevailed. My next step is dropping it from escalating heights until it either works or dies.
I have been having difficulty with my BT Broadband over the last few weeks, it has now been resolved, but I can no longer connect to either my home network or the internet from my laptop though when I re-installed windows 7 the connection was automatic. I can see the link but can't connect.I also dual boot Vista with Mint 8 Helena on my desktop box and cannot connect Helena to either the network or the internet. My router is a BTHomeHub2 and it was recently suggested that it could be being blocked by BT!
View 1 Replies View Relatedi have a wired connection thru a netgear router wgr614, i am running a window machine fine , but ubuntu machine say no connection . i have look around seems to be a common problem . but no simple fix . Network manager is bad , do i uninstall or change thru terminal or .....
View 12 Replies View RelatedTwo days ago we started to receive the following message:
/etc/cron.daily/chkrootkit:
The following suspicious files and directories were found:
/lib/init/rw/.mdadm /lib/init/rw/.ramfs
/lib/init/rw/.mdadm
INFECTED (PORTS: 4369)
You have 2 process hidden for ps command
chkproc: Warning: Possible LKM Trojan installed
And about at the same time (a day before that) we have set up new rules for the queueing disciplines using 'tc' on our Debian lenny box (these rules are for some of the experiments we are carrying out). I have ran the chkrootkit manually and this message (as above) keeps appearing, while the rkhunter tool does not complain about these items. Could there be a connection between setting up the new qdisc's and the chkrootkit "INFECTED" messages?
I have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
I'm using Scientific Linux on a laptop, connecting to a debian server on my LAN via a basic BT HomeHub router. When starting a file transfer with ftp or rsync from the laptop my connection is dropped, every time, after a couple of seconds. I have to reset my network adaptor and restart my network manager (wicd in this case) in order to get network connectivity back. I had a very similar problem before - [URL]. On this occasion my workaround was to replace NetworkManager with yast. I am now using SL though so no yast available, and I am not using NetworkManager any more anyway.
View 3 Replies View RelatedIn my case, it occurs intermittently when trying to connect using putty's command line client 'plink.exe' to a linux machine using ssh. For some testing purposes, a linux server is setup with 8K virtual ip addresses and the testing scripts will connect to these ip addresses through ssh using plink.exe. There will be concurrently 25 ssh sessions launched to the server. While it works for sometimes, it throws 'server unexpectedly closed network connection' error intermittently. If the same ip address is tried again manually, it works. While the ssh server is accepting connections, this error is thrown sometimes and unable to find out the reason from the logs. It is not that the ssh connection is completely blocked. It gives this error message while connecting to some of the virtual ip addresses but works some times.
The hosts.deny, sshd_config are tuned to allow the connections, allow more sessions etc.
how to get my wireless connection to work on the network. I don't see anywhere to go to see if the wireless adapter is even setup in Fedora. My other question is when I boot up and get the options to select the OS the first one is Fedora but the other one says it is other.
I think that is is booting up the recovery partion of Windows. I don't know how to change it so that it is looking at the correct portition. I know it has something to do with the menu.lst file but when I try to open it says that I do not have premission. I am not sure where to go to edit it.
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies View RelatedI can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
I have installed Ubuntu 8.10 Server Edition on Virtual Box. When I start the virtual machine I do not have connection to my home network. The router I have does not assign any IP address to this machine. Now I have some questions which I am finding hard to find answers for over the internet and other forums.
If I do have a network interface (I checked this using ifconfig -a) then is there a command to actually make the operating system connect to that network (something like repair on windows)?? Also what is the difference between a network interface with alias eth0 and eth5? I know that when it was eth0 the virtual machine used to connect to the network automatically. Now that it is eth5 it does not! I do not know however if this is related.
root@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
[code]...
Wireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies View Related
