i have a wired connection thru a netgear router wgr614, i am running a window machine fine , but ubuntu machine say no connection . i have look around seems to be a common problem . but no simple fix . Network manager is bad , do i uninstall or change thru terminal or .....
View 12 RepliesWifi network operated perfectly with f13. Upgrading f13 to f14 did not show any problems except for networking. It seems that the wlan0-link is not ready. Consequently no network information about adresses can be obtained. Tried with network tools to activate wlan0. No reaction Tried to deactivate Networkmanager and bring network up with
service NetworkManager stop
ifconfig -a
Then
ifconfig wlan0 up
dhclient wlan0
No reaction on network. The NetworkManager icon disappears which is understandable.
After having updated unconditionally all packages in Kde-desktop-factory-repository to get the latest version 4.4.4, I can no longer connect to the Internet through Knetworkmanager. I receive the the following message from a pop-up window when clicking on the Knetworkmanager icon
Code: KNetworkManager cannot start because the installation is misconfigured.System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution.KNetworkManager will not start automatically in future.I tried opening Knetworkmanager in a terminal as root user through 'su' but received the following message:
Code:# knetworkmanager knetworkmanager(2331): KUniqueApplication: Cannot find the D-Bus session server:"Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI wish to install a C++ plugin for the Eclipse IDE.I have Fedora 10 installed.I goto:
1. System-->Administration-->Add/Remove Software
2. I type 'eclipse' in the seach box and hit 'Find'.
3. From the list of packages available I select 'Eclipse C/C++ Development Tools (CDT) plugin.
3. When I hit 'Apply' I get an error message saying 'No Network connection available' The 'more deatils' tells me: 'Cannot install when offline'
But my computer IS online. I have internet access etc.
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedI have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I am running upgraded Ubuntu 9.10. As administrator i want to take out of common users panel the 'network connection' tool because anybody can too easily disconnect me from the web. How's the trick, ?
View 3 Replies View RelatedI am running Debian Squeeze on my net book ( ASUS 1000PE ) with an Atheros wireless nic. It has been running fine for months automatically connecting during boot to my hidden network but all of a sudden no dice.
If I use the Gnome network manager and "connect to a hidden network" and I am all set but when I am at the command prompt ( which is how I have it set to boot to) it is a few more steps. How can I get it to automatically load. I did not have any scripts set up before so I assume it is a service I need to turn back on that was turned off in error.
I just installed Ubuntu on my 2009 HP netbook, which has a Broadcom 802.11b/g WLAN. It is now a dual boot, with Win XP, which is still able to connect to my Sprint 3g/4g mobile hotspot. My iMac also has no problem connecting to the hotspot. How do I configure Linux to detect the wireless network? I copied the Broadcom driver (while in XP) to a flash drive, but I can't open it in Linux.
View 13 Replies View RelatedHow could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedI recently (like yesterday) decided to put linux on my laptop because I'm annoyed with windows. However after formatting my hard drive I seem to have an error message at the same point in windows xp and linux when attempting to log on. I have abandoned windows completely and intend to only run Linux on my laptop however after I type my password the following message pops up:
There was an error setting up inter-process communications for KDE. The message returned by the system was:
Could not read network connection list.
/home/jtb360/.DCOPserver_Josh Laptop__0
Please check that the "dcopserver" program is running!
I have attempted to delete the only dcopserver file I can find and ran some suggested commands at the command prompt (I haven't used one since Windows 3.1) to remove an ICE file in hopes that it would recreate the file and run properly after reboot and neither effort prevailed. My next step is dropping it from escalating heights until it either works or dies.
I have been having difficulty with my BT Broadband over the last few weeks, it has now been resolved, but I can no longer connect to either my home network or the internet from my laptop though when I re-installed windows 7 the connection was automatic. I can see the link but can't connect.I also dual boot Vista with Mint 8 Helena on my desktop box and cannot connect Helena to either the network or the internet. My router is a BTHomeHub2 and it was recently suggested that it could be being blocked by BT!
View 1 Replies View RelatedI'm using Scientific Linux on a laptop, connecting to a debian server on my LAN via a basic BT HomeHub router. When starting a file transfer with ftp or rsync from the laptop my connection is dropped, every time, after a couple of seconds. I have to reset my network adaptor and restart my network manager (wicd in this case) in order to get network connectivity back. I had a very similar problem before - [URL]. On this occasion my workaround was to replace NetworkManager with yast. I am now using SL though so no yast available, and I am not using NetworkManager any more anyway.
View 3 Replies View RelatedIn my case, it occurs intermittently when trying to connect using putty's command line client 'plink.exe' to a linux machine using ssh. For some testing purposes, a linux server is setup with 8K virtual ip addresses and the testing scripts will connect to these ip addresses through ssh using plink.exe. There will be concurrently 25 ssh sessions launched to the server. While it works for sometimes, it throws 'server unexpectedly closed network connection' error intermittently. If the same ip address is tried again manually, it works. While the ssh server is accepting connections, this error is thrown sometimes and unable to find out the reason from the logs. It is not that the ssh connection is completely blocked. It gives this error message while connecting to some of the virtual ip addresses but works some times.
The hosts.deny, sshd_config are tuned to allow the connections, allow more sessions etc.
how to get my wireless connection to work on the network. I don't see anywhere to go to see if the wireless adapter is even setup in Fedora. My other question is when I boot up and get the options to select the OS the first one is Fedora but the other one says it is other.
I think that is is booting up the recovery partion of Windows. I don't know how to change it so that it is looking at the correct portition. I know it has something to do with the menu.lst file but when I try to open it says that I do not have premission. I am not sure where to go to edit it.
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
I have installed Ubuntu 8.10 Server Edition on Virtual Box. When I start the virtual machine I do not have connection to my home network. The router I have does not assign any IP address to this machine. Now I have some questions which I am finding hard to find answers for over the internet and other forums.
If I do have a network interface (I checked this using ifconfig -a) then is there a command to actually make the operating system connect to that network (something like repair on windows)?? Also what is the difference between a network interface with alias eth0 and eth5? I know that when it was eth0 the virtual machine used to connect to the network automatically. Now that it is eth5 it does not! I do not know however if this is related.
When I install Ubuntu 9.04 the wireless works fine on my Toshiba Satellite. However, when I let the update manager update to the newest things the wireless doesn't even show up as a choice, as if the wireless card isn't installed. The drop down menu from the network icon only has wired on the list and I can't seem to find anywhere to set the wireless as existing. The same thing happens when I install a new version of Ubuntu 9.10. It just doesn't seem to be there. If anyone knows why this is or how I can fix it it would be greatly appreciated. If you need any more info from me just let me know.
View 3 Replies View Relatedroot@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
[code]...
Wireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies View RelatedI virtualised backtrack on windows 7, and set up the network connection to bridged mode, but my networking still fails.
dhclient eth0, outputs many DHCPDISCOVER but no DHCP offers.
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.