Kernel 2.6.21.5, Slackware 12.0
Xfce 4.4
For example I've just issued 'mplayer foo.flac' and I do not want an error made by me while in the GUI to issue a loud sound notifying me the error and putting in risk my speakers.
I want to create a dvd for a relative you know the kind of thing, old pictures and a soundtrack. What is the best application to do this?
View 4 Replies View RelatedInstalled Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
I recently bought a new laptop. compaq presario CQ41 109AU. It does not come with a pre-installed OS so i've decided to put an Ubuntu on it[karmic koala 9.10]. I successfully completed the installation procedures. however, it does not produce sound when loggin in and playing music files. I gone to look if the settings where put to mute, but they were not. I tried installing a MS Vista in the other partition and the sound worked.
View 1 Replies View RelatedI am using Ubuntu 10.10 x64 on a Dell Studio XPS
I am unable to get JACK to make any sound from any of the applications which plug into it.
Code:
lspci:
me@TheComputer:~/Desktop$ lspci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
me@TheComputer:~/Desktop$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
[Code]....
I'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
Code:
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
i just had to switch from 10 to 11 until 12 comes out, and after setting up asterisk, i noticed VERY VERY BAD sound quality, mostly comprised of severe jittering. I noticed that the way Fedora lets you work with your sound devices in 11 is way different (nicer, but obviously not complete) than ever before, and i am using the same asterisk configs as before, so i'm positive that this is NOT an asterisk issue, and does NOT really belong in this forum; however, only asterisk users will be able to replicate or identify with this issue.
Have any of you 11 users had this happen to you, and if so, did you figure out how to solve it? I'm sure that i can *try* adjusting asterisks jitter buffer settings, but like i said, it was NEVER an issue before 11... Another clue would be that i cannot get crap like gtk-recordmydesktop to produce sound (but that may very well be another issue; however i doubt it)...
how to mute sound from certain application on linux(without changing sound setting within that programm)?
View 2 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
I'm trying to produce a list of opensource alternatives to Blackboard and webct EDIT: please provide user experience and recommendation. I'm not looking for a google search on the products out there; rather, I was wondering about your personal input
View 3 Replies View RelatedIs there any software that can 'read' the log file in nagios and produce a so-called 'scoreboard' (something like a graph) to display the status of the services? I was told that one could 'read' the log file stored in nagios and create a scoreboard.
View 12 Replies View RelatedSo, I have this application called Impact, it is an explicit time integration Finite Elements code written in Java...
[url]
I untar the pack, and launch the application calling a script, from within the untarred folder,
Code:
This launches a gui which allows me to setup a case, which needs some setup file, tipically some *.in and a mesh file, tipically some *.msh.
Other mode of executuion consists of calling the setup file as argument to Impact.sh script ( CLI execution mode, for g33k5 )
My problem is : I have packed the whole stuff into a Slackware .tgz, that places it in /usr/local/Impact, and placed a calling script in /usr/local/bin,
Code:
Code:
I decided to hack the ImpactGUI_OGL_linux_amd64.sh script from
Code:
Code:
no avail,
Code:
even after adding /usr/local/Impact/bin to PATH... won't go...
I can run this thing from within its directory... but I do not like messing within the directories of my applications, this is why I sent this to /usr/local, and placed a calling script in /usr/local/bin...
So I have opensuse 11.2 installed with the latest version of kde. boot, root, and swap are hanging out loving life while home is in a software raid 10. So many years ago I installed an Xmystique 71 gold card. Works great, but only for one app. I pause a movie and want to crank some tunes it gives me fits. I am not a fan of this. I love my opensuse raid 10 but the sound is just killing me. Should I disable the Xmystique card and enable the default motherboard shwag? The embedded sound really is not that bad and should it give me a solution, as in I can utilize sound in more than one app at a time, I will gladly take it. I mean who does not want to utilize amarok whithout shutting down ..... or vlc or kaffeine or whatever.
View 3 Replies View RelatedI'm running Amarok 1.4 and I frequently need to restart the sound daemon. As far as I can tell; no applications are using it at the time, but alsa cycles through my playlist without playing anything (i.e. loads track, doesn't play it, moves to the next track, so on and so forth).
I'm pretty sure this would have something to do with another process using the sndcard. I just don't know which one so I can kill it and troubleshoot why it's doing it.
I have two sound cards in my computer. OpenSuSE 11.3 recognizes them both without a problem, and I can play sound through each of them. Is it possible to set one application to use one sound card simultaneously with another sound card routing to a different application? That would be sweet. For example, I have my surround speakers plugged into one sound card, so I can provide music for the whole room, and have my PC speakers next to the monitor playing a movie.
View 2 Replies View RelatedI haven't sound for any application - XBMC, VLC, Amarok, etc.I didn't install or change anything and all work perfect fine until yesterday.
View 8 Replies View RelatedMy wife is reluctant to move from WinXP so I started my own personal campain to promote fedora at home but my wife complains that I "spend too much time fidling with the thing(PC)" and that "it wasn't the case with WinXP" so I =was looking for ways to impress my wife with fedora's capabilities so I flashed her with compiz and dual screen using our old 52" projection tv as a DVR but rhe problem is that my daughter want to watch her DVDs and my wife want to watch a ..... video.I have a system with two Sound card one embedded on the main board and one on a PCI slot and what I am trying to achive is haveing two applications, like two instances of VLC play their sound on the souncard I select per instance, or one Sound card playing VLC and the other playing a ..... video's sound.
I have looked at pulse audio properties and it detects both of my sound cards just fine and it plays wonderfully on either but that is just it... it will pay on either but not both.I have read that you can configure pulse audio to use your second sound card as sorround or duplicate audio but the idea is dicrete audio from dicrete application. Is there such an use case already supported by pulseaudio?So there might be a solution if I disable Pulse Audio but I rather not but I'm open to either.
In Window XP, Seven and Vista, to hear good sound, it use Realtek application. Realtek give sound effect such as sound in hall. In accordance with that, I intrigued with sound effect from Realtek application and how I want install sound effect such as Realtek application in Linux? I now using Ubuntu 9.10
View 1 Replies View RelatedI have been making the soundtrack with audacity and using various other programs to create a "slide show video" then adding the soundtrack. I would like to know which programs you would recommend for doing this easily and quickly. At the moment I would really like something I could add photos to set timing and transition effects and add a sound track to each invidual image.
View 2 Replies View RelatedAn application that can make sound equalization but I couldn't find any powerful tool so I decided to do one my self I know it will be very hard task but their is no other solution my program will do some audio effects like (echo, repeat, trible, bass, filtering, fading,...)and (fft,addition,....), I will take the signal from the mic and put it on the speaker after my operation is done I think I must take into consideration that application is a real time but i don't know what to do! i don't know should I use java or C/C++! I don't know how to deal with the audio driver (take signal from mic and put it on the speaker)
View 10 Replies View RelatedLogitech 9000 pro.
I need 30 fps so I can splice into existing video.
I am using this script.
Code:
Even though I have set 'fps' to 30, I only get between 14 and 16. Several thread on the internet tell me that UVC in only capable of 15 fps in 640x480 mode.
Is there some way to make the camera (ID 046d:0809 Logitech, Inc.) work as something OTHER than a UVC type camera? Is there a code snippet to work with?
I have no problems with getting the camera to work with any of the apps in the Ubuntu reposit. The script above records video and audio great, just not 30 fps.
The video I will be splicing into will be shot with a video recorder and windows software. If it is a USB hookup, will it have the same constraints of UVC at 15 fps. IIRC, it is the USB that has the compression problem that limit it to 15 fps.
I am having no joy at all trying to produce a DVD with menus using Slackware. I have spent the best part of a day and a half, to no avail, and have had to revert to using either Ubuntu or Win XP under virtualbox just to achieve this.
Have tried using the following front ends to dvdauthor:
Dvdstyler
Devede
2mandvd
Kdenlive (dvdwizard)
Varsha
I am able to produce a DVD with any of them, but without menus. As soon as I try anything to get a menu, all that happens is the menu is produced, but the 'clickable' buttons do nothing, meaning I am unable to navigate away from the menu. Using Dvdstyler under Ubuntu, and follwing exactly the same procedure to produce the DVD works as expected, as does any of the myriad of progs available for Win XP.
I saw the article in Suspend to disk - openSUSE and I decided to test s2disk on my VAIO VGN-AR41L (laptop) using ext4 system (which supports journaling). I used the button of the KDE4 to initiate the process of suspend to disk. The process of storing the image and shutdown the computer worked. But the reverse process didn't work. I also saw in the article that there is a workaround for the journaled systems. Instead of doing this can I switch off journaling on ext4 without loss of data? And if yes, how can this be done?
View 5 Replies View RelatedI encounter a problem with my program recently, i get the core dump of my
program, and it produced by a segill signal, i wondered that how my program can happen to generate this error, and i never write a "0 divide"
I have been asked to provide a document in Microsoft word format. Is there a lightweight MS word editor to produce Microsoft word documents please? I don't want to install the whole Open Office thing just to produce one document.
View 6 Replies View RelatedWe are a small company producing short movies in Arabic and we stick to adobe premiere pro cs4. Lately we need to reduce our cost by moving to ubuntu to save Microsoft fees especially regular support. The main problem we have now is the tool to use for producing our short movies, so the main question is:- Does there is any tool we can use as equivalent to adobe premiere pro cs4? I am looking for a really series tool.
View 2 Replies View Relatedve read some stuff regarding problems with virtual consoles not appearing for some graphics settings, but I think this problem is different.Just a few days ago I had no problem using ctrl-alt-f6 (for example) to get to a virtual console outside of the normal X environment. That no longer works. Nothing happens, no distorted screen, I'm just stuck in the normal X session that comes up as if I did nothing. I didn't make any configuration changes, though I suppose some update could have caused it?I may have read that this is some problem in grub2? If so, is there a way I can get around it without trying to switch back to grub1? I'd rather not mess too much with the bootloaders if I don't have to
View 1 Replies View RelatedI have an AVI which I produced on Blender in which a camera revolves around a model.
I want the camera to continuously circle the model over and over again.
I know I can do this in a GIF file format, but are there other formats that will do this?
What software can I use that would accomplish this?
I needed for the first time to do a slideshow of some pictures, I thought it would be a easy thing but now I have two days trying to do it. I downloaded Manslide, I spent about two hours working on it doing the slides but at end of the render process it do not produce any output. Then I discover that Manslide now is SMILE that is in Packman repo. I spent another two hours making again my slideshow but at the end it didn't produce the output video file. I have all the dependencies, I switch all of them to Packman rpms.
View 4 Replies View RelatedIf you install Smile (video slideshow creator) from Packman repository, you will probably find out that it doesn't produce any output file. This project is most probably dead, homepage is 404 and it's practically impossible to get any information about this program. Therefore it took me 3 exhausting hours to get it working Here is the solution: There is a missing fake.pl file, so you have to copy it to the right place, which is /opt/smile (for OpenSuse, for other distros it could be elsewhere, for example /usr/bin). You can obtain this file from the source package but as it is very small I post it right here to spare your time:
[Code].....
So create a new file /opt/smile/fake.pl and copy these lines into it. Btw. the original file from the source doesn't have the first line, but according to the tip from different forum it is supposed to be here. If Smile still doesn't work you might try to add some extra permission to fake.pl, something like chmod 755 /opt/smile/fake. And if it is still not working check the log file ~/.logsmile.txt This file is by the way also impossible to find, there is no sign of him in the documentation.