Ubuntu / Apple :: Broadcom 4312 IMac 4,1 Wireless Not Working.
Jun 23, 2010
When I first had partitioned, and formatted appropriately, I installed the newest version of Ubuntu available (Time of posting 10.4), on the partition made with bootcamp, rebooted into Linux with rEFIt Now once I booted into 10.4 I got to the desktop, it started asking me about restricted hardware drivers, so I went into System > Administration > Hardware Drivers, It then searched for the drivers, it found the STA driver, and the B43 driver, I am unable to allow both. So I went on to try ndiswrapper, I downloaded it off another pc, compiled and installed on the iMac. then I got the driver off the Leopard install disk, put that on my flash drive, extracted the files from the installer, put that on the flash drive, then I went back over to the machine in question, copied the file to the desktop, I used the cd command to navigate to the folder, then ran ndiswrapper -i bmcwl6.inf, I made sure that the inf and sys files were in there, so I didn't know what was going on exactly.
So then I went into the software sources, and enabled the cd as a software source, then went into Synaptic, and installed the drivers, it said the install was successful, however when I go back to enable it, will still refuse to activate, I have looked all around for solutions, I have even checked out other threads on this matter. The funny thing seems to be, is that everyone, or almost everyone who has this card on their computer, are upgrading to 10.04, when it worked on a previous version.
I have a DEll Mini 9 - it has worked fine even though it has a limited memory. But Husband only uses to have a surf. It now wont connect to net. The Broadcom4312 Wireless Card is not working on Obunto. It has a Dell 802.11b/g Wireless LAN Mini card installed and Obunto Edition Version 8.04 Have phoned Dell and after several calls on Hold for over 15 mins each time and getting nowhere fast i am coming to you guys/girls. I am not a very good comp person, but i do get by and i am trying, so be gentle with me. in simplistic terms.
after finally installing 11.3, I found that my wireless NIC had stopped working. I've spent about 4 hours trying various online tutorials to get the card working, but I'm still right where I was when I began. The card as reported by lspci:
After some serious trouble with Plasma, I decided to re-install 9.10. When booting up, I noticed that the wireless indicator light stayed on orange which usually means that the driver is not loaded.
I have a Broadcom 4312 in a HP Pavilion dv6. I checked the repository but no driver shows up. I seem to remember that it used to be there. Or am I mistaken and do I need to install the vendor driver from the Broadcom site?
I've added the output of lspci and dmesg | gre b43
I'm trying to get my Broadcom 4312 working again since FC10. I noticed that RPMFusion isn't listed. This would answer why I can not install Broadcom -wl.
Well I see there is a lot of people which have problems with BCM4312 I read that topics but my problem kind of different..I installed 11.3 few day ago at my job. Everything was just fine...First of all I'm installed firmware
Code: install_bcm43xx_firmware Wireless worked fine...
I have an HP 2133 Mini-Note [KX869AT] with a Broadcom 4312 wireless card. I've had Ubuntu 10.04 on my machine for a few weeks now and everything was great until my wireless card abruptly stopped working. It doesn't detect any wireless networks,uch less connect to them. I tried reinstalling the proprietary driver, but that hasn't worked.
I'm finding a hard time getting my wireless card to work, my laptop is a Dell Inspiron 1525 and this is all the info: 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) 0b:00.0 0280: 14e4:4315 (rev 01) [ 8.375610] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 8.390374] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1) [ 8.390436] b43: probe of ssb0:0 failed with error -95
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) : SET failed on device eth1 ; Invalid argument. Error for wireless request "Set Encode" (8B2A) : SET failed on device eth1 ; Invalid argument.
I'm not sure if I have a hardware or OS problem. Firewire on my old G3 iMac has stopped working. Previously I've used a scanner and an external hard drive (Iomega eGo) without problems while running Lucid. Now neither works with the iMac, though they both work when connected to a PC. Both the PC and the iMac are running the latest versions of Lucid.
I can't tell when the problem began since I don't use the scanner or hard drive that often. I did try booting using the live 10.04 CD for PowerPC and had no joy with either device.The LCD on the hard drive lights when connected to the firewire port so power is coming through. The scanner has its own power supply.Checking with lsmod I see that both the modules ieee1394 and ohci1394 are loaded.I suspect it's a problem with the hardware. Does any one have an idea how I can go about verifying that? I'd hate to bin an old faithful without first checking everything out.
I'm making some tests with the internal microphone and I've managed to record sounds but the results have a very low volume. I mean, I have to put the input volume to the max and I still get a pretty bad result. I've checked too the input volume in the alsamixer but no way, can't get better results.
After booting up from the cd, I noticed that neither my wireless keyboard or wireless mouse were working. after a while a different screen came up that allowed me to use my keyboard arrows to choose "try ubuntu without affecting your system". So I choose that option and got to the desk top but then i had no use of the mouse or the keyboard at all. I then ejected the disc by quickly pushing the power button in the back of the iMAC and once the disk was out was able to restart the computer.Now i am in a black screen that says that there is no bootable drive.I know about the option key at start up, but that is apparently not working because my keyboard is not being recognized
The card uses a momentary switch to turn on at and off and it doesn't work. I read that there is a way to have the card turn on by default on boot but I can't figure out how to do it.
After successfully installing Ubuntu Karmic on a friend's MacBook 3,1 I tried to get the wireless working. On the Live CD, the Broadcom STA driver worked fine, but now that I've finished installing, I'm having problems. The driver is installed, but Hardware Drivers says it isn't enabled. I try to activate it, put in my password, and the "Enabling Driver" dialog pops up for a split second, disappears, and the driver doesn't get activated. I've tried Google to no real avail.
If I boot Ubuntu from the live disc, the Broadcom installs and activates flawlessly. I installed Ubuntu (Lucid) to my hard drive and it seems to be reading the CD but then gets and error saying it couldn't find the driver. I only have wireless available to me so ethernet is not an option. Is there another way to download the needed the packages in OS X and then install them in Ubuntu?
Aluminum Unibody macbook, the only aluminum macbook to date. It has a Broadcom chip in it and I installed the STA drivers. The first day it seemed to work fine. Then I noticed pages stopped loading. The max throughput I get is like 30KiB/s once in a while. Sometimes I see consistent speeds of 600B/S...this really sucks. Is there a fix or anything?
I was going to make the switch slowly to 10.10 full-time, but the wireless issue is bothering me. The keyboard brightness keys don't work natively, but there's a fix I saw but didn't have time to implement earlier. I like ubuntu but I don't like my wireless not working!
I've been having some trouble with my recently bought laptop. Type: Dell Vostro 1015. You can see the full specification by following the link in my signature.
What's important is this code..
The system freezes randomly and all I can do is to push the power button and force-turn it off.
I'm not sure, but I think it's the wireless. It's my second Fedora install on this machine, and the second was all right until I set the wireless drivers (or I had luck to have no stops).
I have Karmic Koala 9.10 working (near) perfectly on my iMac7,1, as identified by
Code:
NOTE: See below for Lucid 10.04 update to these instructions
IMPORTANT: You need to complete the installation procedure while connected to internet via the WIRED network. Then you can enable the wireless by installing the restricted drivers, after the install is complete. Also the fglrx ATI Video driver is effortlessly installed via Menu > System > Administration > Hardware Drivers
The sound card gave me some trouble, as it is an Intel HDA Model, reported as 'Codec: Realtek ALC889A' by
Code:
It shows up in lspci as:
Code:
It sounded rather tinny at first, when I tried mbp3 and other model names. Then I added the following line to /etc/modprobe.d/alsa-base.conf :
Code:
After reboot, my sound is full and can be put much louder than before. Jack detection works. Some people might have to leave out the power saving options. See below.
dmesg reports:
Code:
Sources consulted are mostly the kernel documentation ( Enter into the terminal: sudo apt-get install linux-doc
The relevant info can be found in HD-Audio-Models.txt.gz and HD-Audio.txt.gz in /usr/share/doc/linux-doc/sound/alsa )
I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.
An example of /var/log/syslog: Code: Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long. Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0) Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets ..... Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0). Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. Apr 15 17:58:29 macbookpro wpa_supplicant[949]: WPA: No SSID info found (msg 1 of 4). Apr 15 17:58:29 macbookpro wpa_supplicant[949]: No network configuration found for the current AP Apr 15 17:58:29 macbookpro wpa_supplicant[949]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
i just got ubuntu yesterday and had to play around with some settings and the fw-cutter tool to get my wireless working and it was...although i upgraded the kernel to 2.6.32-25-eneric...and it stopped working. the simple solution is to use the previous kernelersion...the wireless works there, but thats just not good enough for me ... it recognizes my card is there it just wont connect. originally i was using b43 driver and now it does not show in the system>hardware drivers list only the sta driver does, although when i try to install and activate it i get the error message "sorry, installation of this driver failed.please have a look at the log file for details: /var/log/jockey.log"
I just put 10.10 on my D830 and I love it except for a delay when I'm using the internet. When I click on a link while surfing the web it takes about 13 seconds before it responds. After that it works just fine.
My Windows 7 PC and my Macbook Pro don't do that so I'm guessing it has something to do with Ubuntu.
I have installed CentOS 5 just downloaded yesterday on a Dell D620. Everything but the wireless card works. So I found this article: http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom and followed it step by step and was able to complete all of the tasks. The problem is that obviously it still won't start. It is not even recognized as an adapter but when I run lspci -v it is there sure enough. When I look under the networking GUI it is listed there but it has no MAC assigned to it. Please let me know what command output you need to see and I'll get here asap. I have searched this forum and other sites and nothing so far has worked.
Recently I moved from Intrepid Ibex to Lucid Lynx and everything went fine during and post installation except wireless B4311. I tried to install the specific driver from System-> Administration-> Hardware Drivers but it comes out with an error logged in file jockey.log
