Ubuntu :: Can Mount A Installed Hard Drive - Lost All My Stuff
Jan 24, 2010
I was trying to install a new hard drive and in the process have managed to not only format my old hard drive but lost all my stuff as well. I am running a live CD but unable to mount the said hard drive. I Know its there.
fdisk tells me:
As you can see its still registering as /dev/sda, I am unable to mount this to run a undelete program on it.
a e2fsck tells me
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>
View 4 Replies
ADVERTISEMENT
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
May 2, 2010
I installed Wubi 9.10 on my windows 7 net-book and it failed to install, so I found a tutorial and tried again to install Wubi. My problem now is it failed a second time now because I did two attempts of 30 gig installs I am missing 60 gigs hard drive space and cant figure out how to recover the lost space. I have uninstalled Wubi / Ubuntu from programs but still no recovery. It needs to be recovered so I can dual boot properly given that I use Ubuntu and Windows
View 4 Replies
View Related
Oct 1, 2010
I just lost over 300gb of files due to my external hard drive crashing.There was an error with the files system.I tried formatting on Slackware but cfdisk didn't work for me.I'm looking for something much easier with a GUI or something similar to the Disk Utility that you get in Ubuntu.And also which format do I format my external harddrive to?Something even more stable than ext4 or ntfs? Cause I do not want my external hard drive to crash again.
View 7 Replies
View Related
Aug 24, 2010
I have got 2 hard drives running one one of my computers which i am running as an server. I was using Ubnntu Server which is good but i have decided to change the way that i am going to use the server and have installed Xubuntu over ubuntu server. However in the installation the hard drives shwn when it asked where i would like to install the operateing system. It installed sucessfully and is working but it cant mount my other hard drive which has all of my data on it.
I had tried mounting it throught the command prompt and had no success. After which i have checked if the the toher hard drive is being reconised by Xubuntu and it is as sdb1 but i caqnt mount it and get to my data. I hoped that i can try and put in my ubuntu live cd and see if it can pick the seoncd hard drive up and mount it which it has not been able to.
I have 2 20 gigabyte hard drives atm the moment and i am not adding the others until i can get to all my stuff again form the other hdd.
View 9 Replies
View Related
Oct 22, 2010
id installed ubuntu 10.04 on 160GB hard drive and now i cant see the other hard driveonly ubuntu installed ...
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
View 9 Replies
View Related
Feb 20, 2011
I want to pull a few things off this external hard drive I have that is an ubuntu install from last year. However, my mac won't recognize the file system and mount it so I can pull the few files I need off of it.
What's the trick to getting a mac to find an ubuntu hard drive?
My other option is removing my laptop hard drive, installing the ubuntu one, opening ubuntu manually, burning the information I need to a CD, or a usb key, and then removing the ubuntu hard drive, and reinstalling my mac osx drive to the laptop bay.
View 7 Replies
View Related
Jun 18, 2011
I'mm trying to mount a hard drive in Ubuntu but it doesn't work i typed the following commands
Code:
cd ../..
sudo mkdir /media/windows
sudo mount /dev/sda /media/windows -t ntfs
and then it says
Code:
Error opening '/dev/sda': Read-only file system
Failed to mount '/dev/sda': Read-only file system
i wanted to access my files, not write to it, so is there anyway to mount as read only?
View 9 Replies
View Related
Mar 29, 2010
I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.
View 9 Replies
View Related
May 15, 2010
I've installed Ubuntu 9.04 on my hard drive. The results are worse I keep getting segmentation fault errors, black screens, lock ups, etc. This time I can't get it as stable as on Wubi. It can't stay stable more than 3-4 minutes - then the interface blinks and goes to black screen or shows weird colored strips/squares, locks up or shows tons of errors in the terminal. I did the kernel recovery mode partition check, no errors were found. I installed 9.04 on my harddrive, everything works fine, I log in and it stays great for about 1 or 2 minutes, then it freezes.
It shows the terminal with 'segmentation fault' errors, or goes to black screen and locks up. Alt+SysRQ+B is the only solution and sometimes it doesn't work either. I got Ubuntu 9.04 running through Wubi before and it ran perfectly stable occasionally on few boots. But I can't get it like that on my hard drive installation It just keeps crashing. I did a long memtest (10 tests passed), ubuntu file disk check went fine, my current operating system Windows 7 runs great and another Live CD Linux based system like Knoppix runs perfectly stable. Should it be a driver issue?
View 4 Replies
View Related
Jan 18, 2010
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies
View Related
Feb 23, 2010
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies
View Related
May 10, 2010
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
View 2 Replies
View Related
Jun 14, 2010
I would like to know how to get brassero to look at my 2nd hard drive I can only see my main HD. I have music files on my other drive.
View 1 Replies
View Related
Aug 18, 2010
Installed ubuntu 10.4 on a formatted hard drive IDE. desktop has two other drives , one SATA drive and one SCSI drive. SCSI drive has windows.
Both windows and ubuntu load fine through GRUB2 etc
I had installed WUBI before on the SATA drive and then i uninstalled it.
problem is that when i log in to Ubuntu i see on fdisk
But i cannot access the SATA drive /dev/sda i tried mounting the drive but i get an error saying this is mounted as /dev/sdb5
How do i mount the SATA drive to get access to the drive ? i messed around with this drive when i was using WUBI. i.e. tried to mount it to recover grub but never got it working. Now somehow it seems that this old mounted drive is messing with my current Ubuntu install.
How to recover my fstab is shown below:
Changed the connect sequence in BIOS and mounted the volume using sudo mount /dev/sdb1 /media/sdb1
View 1 Replies
View Related
Aug 25, 2010
im runing ubuntu 10.04.
i just had a init input output error, (and ubuntu wound not boot) so i decided to boot from my live USB to see my fstab file. It booted about 5 times then started to return an input/output ewrror (cant mount)
Hard drive checks ok as per the bios. Ubuntu will not boot and cant try any other OS (no CD drive) (I have tried 3 diffrent live USBs) what next?
View 3 Replies
View Related
Sep 3, 2010
Windows XP Laptop hard drive is stuck in a hibernated mode. Will not let me access it through Windows, period.
I loaded Ubuntu Live on the suggestion of a coworker in order to retrieve my important files by hooking up the Windows HD through a USB adapter (Inland).
Ubuntu recognizes the 160GB HD, but refuses to mount the drive because "Windows is Hibernated." I Know my disk is hibernated, I need a way to get my important files from the drive...
(Screen Shot Attached in .jpeg format)
I know very little abount Ubuntu so please keep that in mind with your gracious replies.
View 2 Replies
View Related
Nov 26, 2010
I just bought an WD external hard drive to back up all the data I have on my computer. After about 30 GB of the data was copied, it suddenly stopped and the following error message popped up code...
View 1 Replies
View Related
Jun 8, 2011
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code:
$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
View 2 Replies
View Related
Jan 15, 2009
I installed a new hard drive to my system. I use a program called R-Drive image to copy all my os to my new drive. It done a pretty good job too, its an exact copy. I deleted the old one. But obviously now I cant boot. I had a look at the menu.lst file i dont know what to change it to. heres my drive setup,
C: - Windows Vista - Ubuntu
D: - Documents - Swap File
E: - Games
View 9 Replies
View Related
Dec 11, 2010
I am using KDE 4.5 and I am unable to mount a hard drive in Dolphin.
I get the error message:org.freedesktop.Hal.Device.Volume.PermissionDenied: Refusing to mount device /dev/sdb1 for uid=1000
The filesystem for the drive that I want to mount is ext4 and the label is "repo"
View 2 Replies
View Related
May 22, 2010
I have a secondary NTFS hard drive in which i can not mount. Here is the output for fdisk -l:
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 4 Replies
View Related
Jul 20, 2011
I'm new to Fedora. Is there an instruction manual. I'm using Fedora 14. I found under documentation a manual for musicians and amateur radio enthusiasts, but not for regular users. I'm using a black widow, which is a holder for hard drives that connects thru USB. I'm trying to mount it. The file system is Ext4.
View 1 Replies
View Related
Apr 18, 2011
how do i make /mmt is the mount point to my hard drive, and how do i mount hard drive? thank you i'm very new to linux.
View 3 Replies
View Related
Jul 23, 2010
I am trying to mount a hard drive it shows up as /dev/sda1
I can click it and mount it via the GUI but I need it mounted for this script and do not want to have an extra step of doing it manually
I have tried (also tried sda vs sda1, no differance)
sudo mount /dev/sda1
sudo mount -t ntfs/dev/sda1
sudo mount -t ntfs-3g/dev/sda1
I know the drive is sda the only partition on it being sda1, but either I get an error saying it couldn't be found or I simply get no response depending on how I alter the code
Oh also the drive shows hpfs/ntfs 0x07 in the disk utility
View 6 Replies
View Related
Aug 5, 2010
I have just installed Oracle Enterprise Linux. (which i believe is build on redhat). This copy of linux is installed on one hard drive, in the system there is another hard drive and also an SSD.
How can I mount the SSD and other hard drive so that I can read and write to them?
Unlike Windows, they dont simply appear under 'my computer'
View 10 Replies
View Related
Jul 24, 2011
My old centos 5.5 server stopped working so I setup a new one and I can't mount it to get the data off (if you're curious, I do have a NAS, but because of renovations it was accidentally shut-off July 2...)here's the fdisk -l:
[root@localhost ~]# fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[code]....
View 8 Replies
View Related
Jan 22, 2010
I have ubuntu running inside of a virtualbox on an xp machine. Is there any way to mount the hard drive that the virtual machine isn't using? AKA the C: drive of the computer?
View 8 Replies
View Related
Feb 14, 2010
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[code]....
View 7 Replies
View Related
