I use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 RepliesSend an E-mail to your local account. Try two different ways to send and read it. How can you check that it really arrived? I decided to try using the 'mail' and 'pine' commands. So:
1) Using the root account, intending to send an e-mail to myself (root):
Code:
# mail -s "Hello root!" root
Simple form of sending e-mails internally.
^D (this keystroke is to finish the e-mail)
EOT
2) Using 'pine', another e-mail client: The mail is composed correctly, with 'To:' field set to:
Quote:
[URL]
which is my hostname, as my box runs in a VMWare Slack 12.2 image. In both cases, nothing was received in my mailbox (by typing #mail)... Additionally I don't see any new e-mails when I look at the file '/var/spool/mail/root'. Do I need extra information configuring my mail client/server/service?
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
I have a server with a static IP that I use as a sendmail server. The problem is that port 25 is exposed. As a result, anybody can login to the SMTP server and send mail from my domain as a user that does not exist as well as email from other non-existant domains. I'm sure there are sendmail options that I can enable to do some checks, like if the user exists on that server or if the domain is the same on the server, etc. I was wondering if you guys can mention a few that I can add to my sendmail.mc file?
I have thought about auth login, the problem is if auth login is on my public port then I won't be able to receive email from gmail because it would be unauthenticated. Also, I only have 1 mail server. I know the ideal solution is to have 2 mail servers. One for outgoing mail/internal mail server where you can enable auth login and the other for incoming mail which just acts as the relay to the internal mail server. That way spammers can't login to send mail out. That's another question I had, how do I configure sendmail to only send email out/in?
Anyhow, so I have to make do with 1 mail server for now. So I decided to add a few rules on iptables. I grabbed the IP range that gmail uses when I receive mail from then and added it to my iptables with the following command.
[Code]....
I ran this command from terminal.
Code: Select allmail -s "Test Subject" example@yahoo.com < /dev/null
Got error on command line:
Code: Select allsend-mail: Authorization failed (534 5.7.14 https://support.google.com/mail/answer/78754 ng13sm2265977pdb.82 - gsmtp)
ssmtp configuration file:
Code: Select allroot=ssmtpmailtesting@gmail.com
mailhub=smtp.gmail.com:587
#rewriteDomain=
hostname=mybox
UseSTARTTLS=YES
AuthUser=ssmtpmailtesting@gmail.com
AuthPass=[mypassword]
FromLineOverride=YES
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies View RelatedI'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.
My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."
C^D
Cc:C^D ~$
is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.
I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused
So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
I have a CentOS 5.4 nas box that I want to monitor.
I believe I can setup mdadm to mail me when there are issues by addin the following line to /etc/mdadm.cong Quote:MAILADDR root
Can anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View RelatedIn my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL)
Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedHow to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedI have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
is there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedDebian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies View RelatedI'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
View 2 Replies View RelatedI use CentOS 5.3 and I am trying to send a simple email through mutt.My command is:echo "test" | mutt -s "test email" myemail addressI have no errors displayed but the email never goes out of the machine. Also the /var/log/maillog is empty.I can see the queued email with:sendmail -bpSo emails never go out.This PC is connected to a network which the gateway is another Linux machine which is configured to be the default gateway in my /etc/resolv.conf as nameserver.
View 2 Replies View Relatedhow do i send out all email remain in linux to gmail?OS: CentOS 5
View 4 Replies View Relatedhow to configure linux for email to send andplz alos guide me what will be the command for
sending? am using oracle linux version 5.5.19 enterprise edition.
I want a php example script to send email in linux.I know that it could be done using mail() function but i dont know how to use it.
View 3 Replies View RelatedCurrently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
I keep getting emails from my 404 error handling system on my CMS saying "mail3.xps.idv.tw:25 cannot be found" with no referer. It would appear that someone is trying to use my server to relay spam to Taiwan. How do I check that my server has the right security to stop this happening?
View 1 Replies View RelatedI'm trying to learn how to send my self an email reminder using crontab, this is what I tried but I'm not getting the email.# m h dom mon dow command 33 13 * * 3 mail -s "This is a test" joedwalker.email@gmail.com < /home/joe/email.
View 3 Replies View RelatedI have installed Trisquel from a magazine DVD. It has trashed my windows despite me selecting the install along side windows option. So onwards and upwards with Linux.
I am trying to get Evolution mail working with limited success. I can receive email but cannot send it. The request to connect to the smtp server times out. SMTP details are below :-
server type : smtp
smtp.live.com:587
ssl encryption
plain
I'm looking for an easy way to send basic emails for the command line. I have tried configuring sendmail and mailx, but I have yet been able to receive a test email at my remote address. I have read through a fair amount of "how to" on this but I am a little confused and obviously not doing something right. My sendmail.mc file is as follows
Code:
divert(0)dnl
VERSIONID(`$Id: generic-linux.mc,v 8.1 1999/09/24 22:48:05 gshapiro Exp $')
OSTYPE(linux)dnl
DOMAIN(generic)dnl
MAILER(local)dnl
MAILER(smtp)dnl
When I try to send a test mail via
[Code]....