this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
Was told that I need to use Javamail for a project to send mail rather than using "mail" or "mailx". Has anyone here done this?Any pointers or sites you've used and can recommend?
View 1 Replies View RelatedI use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 Replies View RelatedI ran this command from terminal.
Code: Select allmail -s "Test Subject" example@yahoo.com < /dev/null
Got error on command line:
Code: Select allsend-mail: Authorization failed (534 5.7.14 https://support.google.com/mail/answer/78754 ng13sm2265977pdb.82 - gsmtp)
ssmtp configuration file:
Code: Select allroot=ssmtpmailtesting@gmail.com
mailhub=smtp.gmail.com:587
#rewriteDomain=
hostname=mybox
UseSTARTTLS=YES
AuthUser=ssmtpmailtesting@gmail.com
AuthPass=[mypassword]
FromLineOverride=YES
Send an E-mail to your local account. Try two different ways to send and read it. How can you check that it really arrived? I decided to try using the 'mail' and 'pine' commands. So:
1) Using the root account, intending to send an e-mail to myself (root):
Code:
# mail -s "Hello root!" root
Simple form of sending e-mails internally.
^D (this keystroke is to finish the e-mail)
EOT
2) Using 'pine', another e-mail client: The mail is composed correctly, with 'To:' field set to:
Quote:
[URL]
which is my hostname, as my box runs in a VMWare Slack 12.2 image. In both cases, nothing was received in my mailbox (by typing #mail)... Additionally I don't see any new e-mails when I look at the file '/var/spool/mail/root'. Do I need extra information configuring my mail client/server/service?
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies View RelatedI'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.
My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."
C^D
Cc:C^D ~$
is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.
I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused
So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
I do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...
You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
I have a CentOS 5.4 nas box that I want to monitor.
I believe I can setup mdadm to mail me when there are issues by addin the following line to /etc/mdadm.cong Quote:MAILADDR root
I have a server with a static IP that I use as a sendmail server. The problem is that port 25 is exposed. As a result, anybody can login to the SMTP server and send mail from my domain as a user that does not exist as well as email from other non-existant domains. I'm sure there are sendmail options that I can enable to do some checks, like if the user exists on that server or if the domain is the same on the server, etc. I was wondering if you guys can mention a few that I can add to my sendmail.mc file?
I have thought about auth login, the problem is if auth login is on my public port then I won't be able to receive email from gmail because it would be unauthenticated. Also, I only have 1 mail server. I know the ideal solution is to have 2 mail servers. One for outgoing mail/internal mail server where you can enable auth login and the other for incoming mail which just acts as the relay to the internal mail server. That way spammers can't login to send mail out. That's another question I had, how do I configure sendmail to only send email out/in?
Anyhow, so I have to make do with 1 mail server for now. So I decided to add a few rules on iptables. I grabbed the IP range that gmail uses when I receive mail from then and added it to my iptables with the following command.
[Code]....
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedI have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedHow to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View RelatedI have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies View RelatedCan anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View RelatedI have specified a particular IP in the php.ini configuration file to be used by the mail() function. However, there are exceptions when I want to use a different SMTP Server's IP to relay delivery of emails to External Domains. So, how to use SMTP Value in the mail() function. I think it has to be done in the Header Section of it...?
View 4 Replies View RelatedI have a bit of problem setting up sendmail on my server. I've gotten so far that I can send mail from my mail server and relay mail from my LAN computers through it. Also, local delivery seems to be working.The problem is receiving mail from other domains. When I send mail from my gmail account to any user in my domain the mail gets delivered back to gmail as it exceeds the max hop count.The mail gets bounced between my ISP mailserver which I use as smart host and between my server.The problem seems to be that my mail server won't accept any mail it is supposed to receive.
View 8 Replies View Related