I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
I just set up a new email server on Debian Lenny. It's Postfix for MTA and Dovecot for IMAPS server. I use Dovecot for authentication. I have two UNIX users on the system (except root), one was added before the installation of Postfix and Dovecot. I'm not doing any virtual things, just plain UNIX users and one domain on a dynamic IP. The first user, "webadmin" can send and receive emails just fine through the server from my mail client.
Now I just added a new user, "scarleo", and it turns out I'm unable to send and receive emails with this account. If I log in (SSH) with scarleo I can use bash mail to send emails, works fine. scarleo can also receive emails from webadmin and can connect to Dovecot to read emails. However scarleo cannot send or receive to or from anyone outside the server from my mail client. I have restarted both Postfix and Dovecot after adding the user. Do I have to do something else to make this account work like webadmin's?
A few relevant lines from mail.log: (I've modded my real IP)
Code:
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<scarleo>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<webadmin>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:45:16 homer postfix/smtpd[5915]: connect from bredband.comhem.se[96.136.112.229] .....
I want postfix to send me the root mail to an external account, but I never do it and I don't know how to do it, anyone can explain me how to do it?
View 1 Replies View Relatedwhat do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedIm pretty sure this is trivial to config, but I havent had any luck searching on google.My situation is: I want to forward any emails sent to my domain to another account. So:
Code:
root@domain -> another_acc
any_other_system_user@domain -> another_acc
any_unknown_user@domain -> another_acc
Currently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
I've just setup a new Ubuntu 10.04 LTS server on linode for myself. Followed an excellent instruction at: here to finish the installation of some basic stuff including postfix.
I am trying to figure out a way to send an email to my gmail address with an attachment, but cannot find how. Already confirmed that email can reach my gmail account.
In the end I have to use mutt to send the email with attachments, probably SendEmails will also do well, but I am wondering how to do the same thing in postfix from command-line?
I use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 Replies View RelatedI happened to know my incoming and outgoing emails are being monitored by my superior. Just wondered, can i check from the mail header to find out all my emails (incoming/outgoing) are automatically being cc to another email account? We're running mail server using postfix.
View 5 Replies View Relatednstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...
Send an E-mail to your local account. Try two different ways to send and read it. How can you check that it really arrived? I decided to try using the 'mail' and 'pine' commands. So:
1) Using the root account, intending to send an e-mail to myself (root):
Code:
# mail -s "Hello root!" root
Simple form of sending e-mails internally.
^D (this keystroke is to finish the e-mail)
EOT
2) Using 'pine', another e-mail client: The mail is composed correctly, with 'To:' field set to:
Quote:
[URL]
which is my hostname, as my box runs in a VMWare Slack 12.2 image. In both cases, nothing was received in my mailbox (by typing #mail)... Additionally I don't see any new e-mails when I look at the file '/var/spool/mail/root'. Do I need extra information configuring my mail client/server/service?
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
I have a server with a static IP that I use as a sendmail server. The problem is that port 25 is exposed. As a result, anybody can login to the SMTP server and send mail from my domain as a user that does not exist as well as email from other non-existant domains. I'm sure there are sendmail options that I can enable to do some checks, like if the user exists on that server or if the domain is the same on the server, etc. I was wondering if you guys can mention a few that I can add to my sendmail.mc file?
I have thought about auth login, the problem is if auth login is on my public port then I won't be able to receive email from gmail because it would be unauthenticated. Also, I only have 1 mail server. I know the ideal solution is to have 2 mail servers. One for outgoing mail/internal mail server where you can enable auth login and the other for incoming mail which just acts as the relay to the internal mail server. That way spammers can't login to send mail out. That's another question I had, how do I configure sendmail to only send email out/in?
Anyhow, so I have to make do with 1 mail server for now. So I decided to add a few rules on iptables. I grabbed the IP range that gmail uses when I receive mail from then and added it to my iptables with the following command.
[Code]....
I am trying to setup a simple SMTP server to relay scanned documents from a Xerox machine to email addresses. Unfortunately the Xerox machine doesn't support TSL or SSL so sending mail over port 25 on gets blocked. I have setup postfix on a desktop running Fedora 13 and have been able to set it up to forward the mail onto the correct server (gmail for example). My question is, how do I get the server to encrypt the emails (scanned documents) when sending them over the internet?
I have tried adding:
Code:
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
But when I look at the wireshark capture of the sending I can read my test message in plain text.
How can I send email outside my LAN using postfix? Actually, I can received email from outside like yahoo. hotmail etc.. But when I am trying to send outside in my mail server here is the error I got..
Jun 2 21:19:51 microtontech postfix/smtp[4434]: connect to k.mx.mail.yahoo.com[98.139.54.60]: Connection timed out (port 25)
Jun 2 21:20:10 microtontech postfix/smtp[4435]: connect to
[code]....
I try to telnet yahoo.com and smtp.pldtdsl.net 25 here are the result, but when I try to telnet smtp.pldtdsl.net its showing trying only.. I checked if my ISP is blocking port 25 isn't. (I forgot what is the website I used to check if my ISP port 25 is block) I try already to used in my relayhost the [URL] but the email I sent still bouncing..But I remember last time when I was installed Hmailserver in my Win2K3 machine I sent email outside but I cannot received..
[code]....
Does anyone have some quick tips on how to send an Ubuntu server's email to a gmail account via postfix/procmail?
View 5 Replies View RelatedI'm experimenting with with mail-servers now and I'm trying to configure postfix to send emails from one email(pop3 is gmail) to any email outside the local network. Server is Ubuntu 10.10 with the last updates.
View 1 Replies View Relatedi am working on a neat little bash script, and i want the output to be mailed to my email account. So far i have tried installing sendmail then running: mail -s Test myemail@gmail.com But that hasn't worked; and i did check my spam folder. Am i missing something or is there a better technique all together?
View 8 Replies View RelatedIs it possible to send an email to abc123@gmail.com directly from Console? If it is possible, do I need to do some 'configuration stuff' to get it to work? How do I start it?
View 15 Replies View Relatedrecently i configure postfix on my fedora core 9 system i want to send mail from one user to another till now i did not create any user, i just configure the main,cf file with the help of some link i found on internet
here is my main.cf file
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code]...
i dont know what i should write about my main.cf file so i post the whole file here.
so can anyone tell me is that the configuration is correct and and how do i create new user to my domain name and how can i send and receive mails from one user to another user using postfix
My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)
View 13 Replies View Relatedtelnet localhost 25 when rcpt to:mike@test.com ,report error: 451 4.3.0 <lisi@test.com>:Temporary lookup failure
View 1 Replies View RelatedI have a website sitting on my private server (CentOS 5x) running plesk 9.2.2. There is a form for customers to fill out and when they press send it sends the data to a specified email address and a BCC if desired (email address present in BCC Field) and and response to the person submitting the form. The problem I am having is everyone gets their email after the submit button is pressed except the person listed in the TO field. Below is the output from postconf -n and below that is the maillog
[root@usloft1105 ~]# postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases
[code].....
How do I get kmail to send an email to back to the same account I am using it from? For example - if I am using kmail for the account me@email.net and I have something from an irc chat or IM I need to keep for future reference (instructions for something, contact info for someone, etc.) I open a new blank email in kmail, address it to myself, copy in the info and hit send, but the message never arrives. I have previously used this method with Thunderbird and Evolution and it works in both of them just fine but does not ever work in kmail.
View 1 Replies View RelatedI'm having a problem with Postfix sending email. To be more specific, Postfix sends mail perfect but when my web server running webmail (RoundCube) connects to my mail server to send email, it fails & there is nothing in the logs that explain to me why:
Code:
Jan 8 11:53:02 mail dovecot: imap-login: Login: user=<carlos>, method=PLAIN, rip=192.168.0.201, lip=192.168.0.200, mpid=2161, TLS
Jan 8 11:53:02 mail postfix/smtpd[2162]: connect from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: setting up TLS connection from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: Anonymous TLS connection established from
[Code]...
I have recently installed the ISPCP web hosting control panel. It seems that after a while running and testing I can receive but I cannot send e-mail. basically I get an error which goes
Code:
postfix/smtp[5939]: connect to alt1.gmail-smtp-in.l.google.com[72.14.213.27]:25: Connection timed out
I have, in the recent past, been able to send e-mail so I know that there is something that has gone wrong with my configuration, which I cannot. I post here my master.cf and my main.cf files as well as the mail.log file and the mail.warn....
Ubuntu Server 8.04 LTS 64x
spCP 1.0.4 OMEGA
build: 20100228
Codename: Priamos
