I'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
View 2 RepliesI'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
View 5 Replies View RelatedIn my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL)
Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
is there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedDebian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies View RelatedHave someone used Linux heartbeat to send email when the Slave server becomes the Master? I've read I can configure the MailTo under.
But I really don't know how to do it. I basically need my primary server to send an email when it becomes inactive and all the activities are manage by the secondary node.
I need help with my K mail I set everything up correctly but it does not send nor recieve email to my kmail. I however did recieve my email to my windows base email through charter internet but not through K mail can
View 2 Replies View Relatedcan't send or recieve E-mail. Running postfix , thunderbird squirrel mail. Thunderbird and squirrelmail connect to server but am unable to send or recieve. recieve connection refuses 111 can't open smtp stream. I seen a post mentioning port 25 : 587 for squirrellmail but I do not have exim.conf to update daemon_smtp_ports= 25 : 587 is this located in another file for suse 11.2?
View 3 Replies View RelatedI have designed and one form and php code to send mail. I am developing this in my localhost, So now i want to send email from my localhost to test my programming. I googled and i find something like editing "php.ini" file. But it didnt work for me.
View 9 Replies View RelatedHad anyone tried downloading a free SMTP server from the web and use it to send emails in nagios, when the services are down, an email notification will be sent.Right now i need a smtp server in order for me to send email notifications, are there any recommended ones?
View 7 Replies View RelatedI need to send a fax to my doctor but I don't have a fax machine.
Is there a way to accomplish this using Slackware 13.37?
How is it possible to send email using the "mail" program? I tried:
echo "testing" | mail -s "test" myaddress@gmail.com
But nothing happened. I made sure that the sendmail daemon was running before I tried. Is there anything else that I have to set up first?
I've been trying to get PHP to send an email using PEAR's mime mail and have been unable to get it working.
View 3 Replies View RelatedSent an email by using telnet on port 25 from the terminal. Telnet states my message was sent but I never got it. Is it on the hard disk somewhere. Is there a log file? Where did my email go? Did it go into the ehter? I opened port 25 on my firewall through gnome by selecting 25/smpt checkbox as a trusted service.
View 8 Replies View RelatedWe use mutt to send out emails.mutt -s "Test" -e "Content-Type: text/html" test@example.com < message.htmlWe send out our email updates in HTML format. We would like to send emails as multi-part containing both a text version and an html version. How do we create such a multipart message in Linux when the email subject, and HTML and text versions of the email body are given?Can we use mutt to send the multipart email created in step 1, from the linux prompt?
View 1 Replies View RelatedBasically, I think my Internet crashed while sending an email via Evolution and now whenever I open Evolution, or try and receive any new email it just sits there sending this email - it reaches 100% so I can only assume it has actually sent the email.
There's a button to "Cancel the current mail operation" though it doesn't appear to be doing anything; the email is still being "sent" each time.
This would be pretty tedious for the guy I sent the email to.
Has anyone had similar issues and knows of a fix?
How can I send an email from localhost via the terminal? I don't need pop just smtp. I believe this can be done with postfix which I have just installed but what is the command to input via the terminal, on my centos box I use the following to send the contents of some files which works just fine but what about sending through postfix on ubuntu?
Code:
sudo tail -50 /home/user/.bash_history | mail -s "bash history" email@mail.com
here is a fragment of a bash that i have to send an email when a back Up is made. basically a usr runs the sh - it asks for the job num and I read that from standard in . I do a tar of the drv to tape and I wish to send an email that job such and such has happened. My problem is : the subject of the email. I can set it - but if i try to use a var ( as in the $jobNum ) that Does work in the mail body - the subject comes out blank. I have also tried to buld a text file and shove that in the SUBJECT. my Q is how can I use a var in the subject.
# email subject
### so I have tried bulding and reading a tmp file -no works
EMAILSUBJECT="/tmp/emailsubject.txt"
echo "backup job" $jobNum >$EMAILSUBJECT
[code]....
I'm using Linux 11.04 and just installed the most recent version of Postfix. I'm trying to send a simple email (through a relay) but when I run the command
sendmail davea@mydomain.com FROM: fromemail@gmail.com SUBJECT: hello world this is a test email .
It just hangs there. There is nothing in /var/log/mail.log or in any of its accompanying files.
How to set outgoing mail limit? And what is the default value?
View 2 Replies View RelatedI cannot send an email link in Namoroka. I go to file-send link and nothing happens. I tried to find the problem by about:config in Namoroka. I just found /usr/bin/mozilla-thunderbird. With my limited knowledge I do not know what else to look for.
View 14 Replies View RelatedI have sendmail setup and it works fine sending emails to outside email addresses. When I try and send email to our internal groupwise server the mail never gets there and I get an error message in the log user unknown.
View 1 Replies View Relatedi have a problem regarding our email server. all the users can send email but they cant received mail. .when hitting send receive on outlook there were no error found. .i have already reboot the server and restarted the sendmail services but still same problem.
View 1 Replies View RelatedHow to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
View 5 Replies View RelatedSo I have Postfix working great and I've always used webmail if I needed to send email from PC's outside of $mynetworks. So fast forward to today where I got my 1st Android powered mobile phone and I can configure the Android mail client to send/receive IMAP email but my question is do I need to become an open relay to allow my random wireless providers dynamic range of IP's to send mail via Postfix? Seems extremely vulnerable and scary to think I would have to allow my providers IP range to relay mail via my MTA. I started reading a bit and I think I need SASL authentication and since both Postfix 2.8.1 & Dovecot 2.0.11 are both configured / using TLS, is there anything else I would need or you recommend for sending email from my Android powered mobile?
View 2 Replies View RelatedI can send mail through telnet and the recipient receives the email, but I cant send it through PHP.
View 6 Replies View RelatedI use sendmail using my server. I hosted my site I just bought a domain name. Everytime I send mail I saw in my log files localhost.localdomain. How can I change this hostname in sending my mail.
here's the log:
From MAILER-DAEMON@localhost.localdomain Fri May 8 16:30:23 2009
Return-Path: <MAILER-DAEMON@localhost.localdomain>
Received: from localhost (localhost)
by localhost.localdomain (8.13.1/8.13.1) id n488UNlD006632;
[code]....
I have postfix sort of working correctly. postfix can send email to the internet but it doesn't want to send email to my local exchange server. What I need is for postfix to send emails directed to @xyz.com to my exchange server instead of itself.
My setup
mail.xyz.com - exchange 2003 server
www.xyz.com - centos 5.3 server with postfix
www.xyz.com can send emails to my hotmail.com account so that part works correctly. www.xyz.com can't send email to username@xyz.com. postfix seems to be delivering the email to itself and not the exchange server.
How can I tell postfix to send the @xyz.com emails to my exchange server?
Here is a sample of my /var/log/maillog
Jul 22 15:43:43 list postfix/smtpd[9802]: D63168604A3: client=localhost.localdomain[127.0.0.1]
Jul 22 15:43:53 list postfix/cleanup[9805]: D63168604A3: message-id=<20090722204343.D63168604A3@www.xyz.com>
[Code].....
I just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address.
Final-Recipient: rfc822; example@hotmail.com
Action: failed
Status: 5.0.0
Remote-MTA: dns; mx3.hotmail.com
Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.
I'm trying to send an email using mailx, in a bash script, but I can't get it to work. In the terminal I can, and this is how I do it:
Code:
$ mailx johndoe@gmail.com
Message^D
Within seconds of doing this, I get sent an email. The problem is with the bash script I'm trying to make. Among other things, I tried this:
Code:
#!/bin/bash mailx johndoe@gmail.com < "Message" I honestly don't know what I'm supposed to do, and I've Googled a bunch of things too, and didn't have too much luck. Is there anyone who could help me out?
Edit: Figured it out. This is what I did, and it works for me:
Code:
#!/bin/bash
echo "Message" | mail -s "Subject" "johndoe@gmail.com"