General :: Gnome Desktop Does Not Display / Sort It?
Dec 1, 2009
I am using fedora9 os
when i logging to gnome in root user
then gnome desktop does not display ,it is white screen
i viewed log messages the message is
Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
View 2 Replies
ADVERTISEMENT
Sep 3, 2009
I'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?
View 1 Replies
View Related
Jan 22, 2010
Installed Suse 11.2 from download CD. During the "answering questions" at the beginning of the process, selected Gnome as the desktop enviornment instead of the default KDE. The install process ended with no reported errors. After the final reboot at the process's end, the Gnome logon screen was displayed. After the user name/password were entered, a medium green screen was displayed, but the Gnome desktop was never displayed. The "animal" logo was not on the screen just the green screen and some "filagree" lines, probably part of the logo.
Waited a few minutes, mouse-clocked, pressed various keys and then tried ctrl-alt-del, but no response. Did a power off/on reboot, but the results were the same.
I then did a re-install. Took the KDE default for desktop. At install's end, the KDE desktop appeared and everything works just fine. During this second install, all choices were the same as for the first/Gnome install. Worked from written notes, and not from memory, so am sure that the change to KDE was the only difference.
Couldn't find any information on this anomally via forum and Google searches, hence this post.
This is my first time to use Suse, so could well have "missed something".
View 3 Replies
View Related
May 17, 2011
So I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
View 3 Replies
View Related
Jan 4, 2010
New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?
View 2 Replies
View Related
Apr 29, 2010
In KDE's Konsole, I can do the following from the terminal:
dcop kwin KWinInterface currentDesktop
And it will tell me which desktop my terminal is connected to ( per [URL])
How can I determine what desktop number the current gnome terminal in a gnome session is connected to?
View 1 Replies
View Related
Apr 16, 2011
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
View 3 Replies
View Related
Feb 2, 2010
I'm using gnome. I created some text files. After I change something in myfile.txt there's myfile.txt~ automatically created as a backup. Ok... now, on KDE I see these ~ files and I can delete them if I want but they're hidden in gnome... Gnome seems to treat them as special hidden files (just like .mydir directories) How do I make ~ files visible in gnome so I could edit or delete them?
View 1 Replies
View Related
Jan 11, 2010
i was using GDE in my ubuntu system. But yesterday i did some thing so my ubuntu system has changed as debian. My login screen changed and i cant access "system->administration->Login window"when i do this i am getting this error message"GDM (GNOME Display Manager) is not running.You might be using a different display manager, such as KDM (KDE Display Manager), CDE login (dtlogin), or xdm. If you wish to use this feature, then your system will need to be configured to use GDM instead." How to come back to my normal original ubuntu with GNOME.
View 1 Replies
View Related
Jan 26, 2010
I'm using ubuntu (and compiz, though I'm not sure it's relevant) and I've been wondering something : how to display the desktop, as you would in windows using windows key+D ? In system-> preferences-> keyboard shortcuts there's an action called "hide all normal windows and set focus to the desktop". What does "normal windows" mean ?
When I press this shortcut (which seems to have the same effect as if you press the bottom left corner), the desktop is displayed, but there are some small squares in the corners that seem to be pieces of windows. What are these exactly, and if they're not useful, how can I make them disappear? Plus, if I press this shortcut twice, all windows disappear from the bottom panel (I don't know the proper name).
View 6 Replies
View Related
Jul 13, 2010
Is there any way where i can program a widget to display the status of different services. This widget should also be able to auto-update the service status if the service is being toggled with.
View 5 Replies
View Related
Apr 3, 2011
ive tried 3 different distro's and i get the same issue with all 3, kubuntu 10.10, lubuntu 10.10 and opensuse 11.3... ok i know kubuntu and lubuntu are practically the same but on all the disks when i boot them i get exactly the same problem, they are all 64bit.
[URL]
It seems to take the desktop from my windows install, im booting off the CD, it shows the screen and the crashes. my system is an AMD phenom 8850 triple core, gigabyte ga-m6bm-s2, 4gb ram, XFX GT 240
View 2 Replies
View Related
Jul 2, 2010
Debian Squeeze: Linux jilldando 2.6.32-trunk-486 #1 Sun Jan 10 05:53:18 UTC 2010 i686 GNU/Linux
gdm for desktop manager
I have 4 differences situations, 2 work, 2 do not: So I think my server box (Jill) is messed up.
1) On the server desktop, I can open a console as the gui logged in user and type: xeyes and those eyes appear.echo $DISPLAY :0.0
2) If from that console I log in as another user (ros) and then type:
xeyes I get:
Error: Can't open display:
echo $DISPLAY
(NOTHING)
so that will be a problem.
3) If I ssh into my offices remote server from my XP machine with putty and x-forwarding and then type:
xeyes and those eyes appear.
echo $DISPLAY
localhost:11.0
4) If I ssh into Jill from my XP machine with putty and x-forwarding and then type:
xeyes I get:
Error: Can't open display: echo $DISPLAY (NOTHING)so that will be a problem.
This leads me to think I have something messed up on my Linux box Jill.
I have tried setting DISPLAY= to various values but same error, so this led me to believe something else needs setting. Especially as env yields alot more in situation 1 than in situation 2.
What can I set where, that will allow me run xeyes (anything X) in situations 2 and 4, just like in situation 1 and 3?
View 10 Replies
View Related
Mar 24, 2011
When ctrl alt d or the icon on the bottom left corner is pressed, it sometimes doesn't show the desktop and instead restores hidden windows. Is there a way to access the desktop directly, without only one shortcut ? I was also wondering how useful are these hidden windows (sometimes, the icon in the application bar is bar after being idle for a while).
View 11 Replies
View Related
Jan 11, 2010
How do I set the taskbar to display only the windows from the current desktop? I did it once before, but am on a new installation of my distro.
View 3 Replies
View Related
Sep 18, 2009
I am having an issue with my GUI desktop display. I switched from the desktop to a virtual terminal using Ctrl+Alt+F2. Upon returning to the GUI desktop (Ctrl+Alt+F7), my display is all garbled up. I tried changing the resolutions, and it does not make a difference. I tried rebooting and the display is still bad.
View 1 Replies
View Related
Mar 22, 2010
With Mandriva 2010 and KDE 4.3.5 it updated to kernel; 2.6.31.12-1mnb and I want to find out if it boots to this new kernel, or the previous one. In the Ubuntu gnome desktop I do know how to find that easy, so what tool or terminal command will display the current running kernel version ?
View 6 Replies
View Related
Nov 9, 2010
I am having a problem getting my virtual console back after starting XWindows. The display goes blank when I press Ctrl-Alt-F1. If I press Ctrl-Alt-F7 I get the X session back. I have tried setting vga=x31A on the linux boot up. Also tried rdev -v /vmlinuz -1, and rebooted. I have tried two different monitors, same problem. One is a an LCD (Philips 170S6Fb/27, the other a Samsung Sync Master 750s. Originally the Samsung worked fine. I could switch between X and VC no problem. Now that I have the LCD monitor working after changing the XF86Config, I have this problem.
My kernel is 2.2.15-5.0, Redhat 6.2. Here is the output of lspci for the video card:
00:0c.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 4755
Flags: bus master, stepping, medium devsel, latency 0
Memory at e2000000 (32-bit, prefetchable)
I/O ports at b400
Memory at e0000000 (32-bit, non-prefetchable)
Expansion ROM at 000c0000 [disabled]
Hopefully there is someway to control how linux sets the video mode when switching consoles.
View 18 Replies
View Related
Mar 18, 2010
I'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies
View Related
Jan 14, 2011
Recently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com
Initially twin view ( same desktop viewed on both monitors ) worked no problem
Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.
Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...
If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..
View 1 Replies
View Related
Aug 26, 2009
I am a complete newbie only had pc with linux installed for a week, for some stupid reason we had 8.10 pre-installed and decided to upgrade to 9.04 now we can't get past the gnome login screen asking for user name and password. Linux was already installed by mesh with a userename and password which we didn't change,we are really stumped as we can't get past this logon screen.
View 8 Replies
View Related
Jun 11, 2011
send me the information about how i change my desktop gnome to kde ?
View 5 Replies
View Related
May 26, 2010
I've read some past issues with this and was wondering if anyone else has issues with F12 / F13.
When I logout of gnome or kde on a fresh install of Fedora 13 the panels disapear but I never receive the log on window. I cannot switch to command either the screen is locked completely.
I havn't run updates or anything, the install is nearly out of box except for the installation of kde.. The issue existed before I installed kde, I was hoping it didn't have this issue lol. fat chance of that..
Anyone aware of any fix's? Or what the issue is?
View 1 Replies
View Related
Jul 19, 2011
I came along the comment (when you type startx => you won't go to KDM or GDM but directly to your standart desktop= KDE,GNOME,...) at [URL] and would like to know what the difference is if any.
View 2 Replies
View Related
May 15, 2010
Is Gnome or KDE a way to set up desktop icons for your computer?
View 1 Replies
View Related
Dec 2, 2010
I have checked the thread about the referred subject. However, I cannot find the gdk in /etc/sysconfig. I have fedora12 i686.
View 6 Replies
View Related
Jan 26, 2011
i would like to know how to install kde / gnome desktop on centos5 but not use yum,because my yum always fails due proxy problem.
View 3 Replies
View Related
May 23, 2011
How do I get it to display a different desktop background for each desktop? I'm sure I saw this option somewhere, but I can't find it again.
Secondly, it defaults with 4 desktops in a 2X2 grid layout. I changed it to 2, then back to 4 and now it has 4 desktops in a linear layout (1x4). How can I change it back to 2X2?
View 5 Replies
View Related
Feb 9, 2011
I was not connecting to Internet in kde so i edited auto etho settings i make some changes
but alas! no Internet connection
and the worse thing is that i lost connection in gnome desktop too
but it is showing me i am connected to Internet
but i cannot surf (server not found))
{i changed the setting to default {{after i changed them in kde ]]
and notice following
in edit auto etho connection
connect Internet automatically-yes
ipv4 setting--
automatic (dhcp)addressees nonly
ipv6 setting
ignore
so ubuntu is showing me that i am connected to Internet but i cannot access Internet
so the main problem is ""ubuntu is showing that i am connected to Internet but my browser says no server found and i can not install software in software center it gives me error --please check you Internet connection
View 2 Replies
View Related
Apr 28, 2011
I can't anymore sort GNOME Panel's window list by drag-and-dropping.Can I reactivate that? Is there another way to sort windows
View 1 Replies
View Related