I am trying to install Python and during the installation the system returns "dejavu-sans-fonts conflicts with dejavu-fonts". I would imaging that removing one or other of these font packages will resolve the issue but don't understand how to do that.
View 2 Repliesin ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work
View 3 Replies View RelatedI am trying to install the open office suite using Add/Remove Software. It however give the following error:
Code:
dejavu-serif-fonts conflicts with dejavu-fonts
dejavu-sans-fonts conflicts with dejavu-fonts
dejavu-sans-mono-fonts conflicts with dejavu-fonts
Trying to install from a 10.04.1 Lucid LiveCD. The computer is pretty old but has Windows XP installed on it currently, which runs. (So it can't be that old!) I boot up and press F6 and I get the screen. When i try to install I get the Ubuntu logo with the 5 white/red dots and there is movement. The activity light on the CD drive flashes regularly and chugs along. At a certain point the screen attempts to change resolution or something and it goes all cyan and messed up. I assume that this is at the point where it attempts to load the graphical disk partition utility or whatever. Is there a way to pass a command line option at the install menu to make it a text only install or at a lower resolution? I'm not sure if it's trying to jump to the default IDID (or whatever it's called) resolution of the LCD monitor, since the video card may not support that resolution or something. (Because the video card is much older than the monitor).
View 1 Replies View RelatedI got a new laptop the other day, repartitioned it and installed Lenny. The wireless did not work. From some searching, I decided that I have the 14e4:4727 broadcom chipset. The driver I need is partially supported by the 2.6.33 kernel. I installed squeeze and downloaded the 2.6.35-7 kernel from kernel.org Then compiled it with the debian 2.6.32 kernel config file. Once it was done I installed the kernel deb files, and restarted it.
Kernel 2.6.35.7 Compiled with commands
make oldconfid
make menuconfig
export CONCURRENCY_LEVEL=2
make-kpkg clean
fakeroot make-kpkg --append-to-version "-hermes" --revision "10-5-2010" --initrd kernel_image kernel_headers
[0.433831] PCI_root PNP0A03:00: address space collision : host bridge window [mem 0xafffffff-0xdfffffff] conflicts with PCI bus 000:00 [mem 0xd0000000-0xffffffff]
And it seems to hang until I manually hold the power button to shut it down.
Before I compiled my own kernel I tried to use the liquorix-2.6.35-amd64 kernel with the same result. Am I doing something incorrectly?
Computer: DELL Inspiron m5010
4g ram
phenom 2 triple core
ATI Mobility Radeon HD 4250
I have been using linux primarily for a year or two.
i am using an USB keyboard and mouse. This is awkward because I cannot select which OS to boot from, etc.Also, cannot access BIOS to potentially turn on the legacy USB function. We do not have a ps/2 keyboard, and believe me, I looked. I acquired a usb to ps/2 adaptor: Still no joy. Also, the keyboard doesn't work within the virtual Ubuntu, while it did when connected without the adaptor. Getting my hands on a ps/2 keyboard is not an option. To get into Ubuntu, I had to, within Windows, tell the computer that the Live CD was a bootable drive, so that it would be the first option over Windows, and therefore the automatic selection when I didn't (couldn't) make one.
[Code]...
This leads me into the Ubuntu 9.10 install, where I am told Ubuntu is already on the computer (half of the hard drive, with Windows XP on the 2nd half), and I can either install 9.10 beside it, or replace it. If I choose to replace it, 9.10 takes over the entire 40 GB. Part of the problem is that the partition that Ubuntu is apparently on is /dev/sda1, and Windows XP is /dev/sda2, but within the Palimpsest Disk Utility:
20 GB File System
NTFS File System
Partition 1 (HPFS/NTFS (0x07))
/dev/sda1
20 GB File Unrecognized
Unrecognized
Partition 2 (Linux (0x83))
/dev/sda2
So I'm worried that if I install 9.10 in /dev/sda1 like it wants me to, I'll be losing XP.
I just installed Kubuntu 10.10 , been using gnome Ubuntu for a few years. At the same time I bought a new video card , the VisionTech 5550HD. My Nvidia card seemed to conflict with my HVR1600 tuner , so I thought I would switch to ATI. With the FGRLX driver , there was an error in the xorg.log , so I thought I would just use the Radion Driver. It works , but glxinfo shows "OpenGL renderer string: Software Rasterizer". I assume this means no hardware acceleration. Is this normal. Graphics seem a bit choppy, I would like to get one driver or the other to perform well. By the way, I have a few problems with Kubuntu, but over all I am really liking it
View 1 Replies View RelatedI'm about 2 weeks working on this server to install yum : Im almost getting there, the Dependencies are reduced to 2: rpm-python and yum-fastestmirror.But installing rpm-python its driving me crazy... it keeps saying:
Code:
[root@03044f2 ~]# rpm -Uhv popt-1.10.2.3-18.el5.i386.rpm
warning: popt-1.10.2.3-18.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID e8562897
Preparing... ########################################### [100%]
file /usr/include/popt.h from install of popt-1.10.2.3-18.el5 conflicts with file from package popt-1.10.2-32
I found the package (popt-1.10.2-32) and it says it's already installed:
Code:
[root@03044f2 ~]# rpm -Uhv popt-1.10.2-32.i386.rpm
warning: popt-1.10.2-32.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
Preparing... ########################################### [100%]
package popt-1.10.2-32 is already installed
I don't know what to do know.. I read somethings about forcing rpm --force but I'm afraid it will trigger another error... since this is a server I prefer not to play smart with it.
I just finished installing a bunch of truetype fonts. After installing them, firefox is displaying "bradybunch" font when I search google.
The font settings are all serif and sans serif in both the system fonts settings and firefox settings.
I am using ubuntu 9.10.
Any idea why this could be happening?
I would like to use the Adobe Garamond Pro in my text doccument in open office writer. I got a text document where from a friend where it is used so I know that it can. But when I want to edit I cant find it in the fonts dropdown menu.
View 2 Replies View RelatedI have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.
How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?
Yesterday I tried running pacman -Syu to update my system, but the cups package keeps conflicting and stops the whole process. This is what happens when I try to just upgrade cups:
Code:
$ sudo pacman -S cups
Password:
resolving dependencies...
looking for inter-conflicts...
[Code].....
I have just installed openSUSE 11.2 X86_64 on my laptop, I then used KDE to install lots of type 1 fonts for my printer. These get loaded to /usr/local/share/fonts/...These installed fonts are visible to KDE (KWRITE) and GIMP so I assume that the installation was O.K. When I start openOFFICE writer I do not see these fonts. The font selection appears to be the fonts located under /usr/share/fonts. I have not tried other ooo3 components. I assume that they are not going to see the fonts either.
I have searched google and it appears that /usr/local/share/fonts is the correct location for non-packaged fonts. Has anybody any idea what is wrong? I think I could move all the fonts to /usr/share/fonts and ooo3 would work but this seems to break the installation directory structure. I have considered symlinks but I don't like the idea of defining a font twice to Linux and creating the syslinks is more work than reinstalling the fonts if they are lost
I want to be able to do
sudo ./program.py
instead of always having to do
sudo python program.py
What do I need to change?
I've already used line split stuff to transform my data into something like this in a text file:
Code:
['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']
[code]....
How can I get this on a python program so I can manipulate it as an array?
Python 3 want situation for python 2?Python 2 become stop?
View 1 Replies View Relatedyum dependency problem please? I am running Centos 5.5. I need to install python-devel, but when I do so I get:
[Code]....
1. What do I need to set all the fonts to in 11.04 to make them look more like W7 fonts?2. Is there a way I can improve the graphics in WINE? Some very simple games run slow. Is there a way I can change the cursors in wine.
View 3 Replies View RelatedHow to change my fonts,my fonts is too ugly?
View 9 Replies View RelatedI have a function definition in a Python 2.x script which take a tuple as one of its arguments, but 2to3 has no answers nor any of my searching on how to represent the same in Python 3.x
Code:
def blah(self, (string1, string2))
How can I upgrade python-2.4.3 to python-2.5?
View 1 Replies View RelatedI've read a number of posts [URL].. that state that the Microsoft fonts, formerly msttcorefonts, but now (supposedly) called ttf-mscorefonts-installer should be available in Synaptic Package Manager.
Neither is present in mine- I am running Lucid Lynx 10.04 and I have both font multiverse and universe enabled; althoguh, the wiki link says I should see hundreds, but I only see about 30 total in all 3 font repositories. So I then tried apt-get tff-mscorefonts-installer and I got the following error: E: Invalid operation ttf-mscorefonts-installer
What gives? Is this package no longer available? Should I be looking in some repository other than Font?
I reinstalled Fedora 11 last night because i saw that I could leave out packages that I don't need by unchecking everything in the software selection screen. Anaconda installed about 179 packages and I rebooted. I installed X, GDM, and LXDE, but whenever, I start GDM, all the fonts show up as random boxes, ie. there's no english on the sceen, just boxes. I'm pretty sure that i forgot to install a font that fedora uses for gdm but i don't know which one to install.
View 1 Replies View RelatedI have been using Ubuntu for a while with no real issues. I have tried to do a fresh install of Kubutu but I cannot install it due to the fonts on the installation process being tiny. I am using a HDTV as my monitor so could this be the problem?? I have no other monitor to utilize so where do I go from here?
View 1 Replies View RelatedI'm trying to install Ubuntu 10.10 64 Bit but when the Setup loads, the fonts are missing, instead I see a lot of squares [][][][][] [][] [] [][][] and I can't continue because I can't read anything, I try to change language at boot menu but I can't solve it. Also I have tried to install it into a VirtualBox, but the problem is still there. I have installed Ubuntu 10.04 64 Bit and it works perfect, I downloaded the ISO today, this is the finale release. What can I do?
This is my screenshot:
How to install times new roman fonts in Ubuntu 11.04 in 64 bit desktop??
View 2 Replies View RelatedI have to install this file - python-dev 2.6 - to run FreeCAD. I found the file by googling it however the site 'strongly suggests downloading this file via the synaptic package manager'. How do I do this?
View 3 Replies View RelatedI have a splendid SONY Vaio Full HD with a NVIDIA GeForce GT330m.I have OpenSUSE 11.3 64bits installed.With the default driver, everything looks good.Once the official NVIDIA driver is installed, all the GUI fonts are "magnified". The resolution did not chane (always 1920x1080), but the gui font are so huge that I feel like on my old laptop with screen resolution 1024x800.I checked the configuration, but all fonts are set to 9 or 10 pixels high, but they look much bigger.
View 6 Replies View RelatedSo before natty, firefox 4 interface fonts matched the rest of my apps, but now they are huge! See the screen-shot to see what I mean. Anyone know how to get them to match again?
I think some of the browser fonts changed as well, but I know I can change them in the options menu.
Need info on installation procedure for Unicode fonts on RHEL 4? I want the unicode fonts to display the Marathi(Devnagri) pages in the screen. At present I am getting the unicode as square,square,etc.on my screen. I am using Firefox Version 2.0.0.20.
View 6 Replies View Related