General :: Enable Infrared In Fedora?
Oct 16, 2010i am yashwant kumar using fedora 11 in my IBM R52 hardware. my system supports infrared but i dont know how to enable it. i tried but didnt sucessed. how to enable infrared over here.
View 2 Replies
ADVERTISEMENT
Ubuntu Multimedia :: 10.04 + VLC + Infrared Remote?
May 19, 2010I've got an HP Pavillion dv9000 laptop, the type that come with an HDMI port and a built in Windows media center remote.
How do I make it work with VLC? I've done a little research, and I've installed lirc. It now sorta works with Totem, but not at all with VLC. What am I doing wrong?
Hardware :: Infrared Remote On Macbook - Debian
Aug 29, 2010I'm trying to get mythtv running on a macbook (2nd gen) and have got to the point where most things are working. But I am struggling with the IR Receiver and a non-apple remote control. I have lirc installed and the IR device is detected as an inbuilt HID usb device and the device file /usr/usb/hiddev0 works as the lirc device for the apple remote.
Trouble is the apple remote with its 6 buttons is not very useful in mythtv. I have a leadtek DTV tuner and it came with a remote that has lots of buttons so I would like to use that. Unfortunately, even getting the raw data from the remote doesn't seem to return valid data for that or any other remote I have apart from the apple remote.
I'm running
To see the raw data from the remote. For the apple remote I usually get 32 bytes/button push and bytes 20 and 28 change for each button. All the other remotes return the same 32 bytes regardless of the button pushed.
These are:
For the apple remote I get:
Where xx is different for each button. The values for the codes in the lircd.conf for each button are 32 bit quantities made up of the 5th, 13th, 21st and 29th bytes (ie: for the six apple remote button codes you have 0x87EEF0xx where xx is 0B, 0D, 08, 07, 04 or 02)
Has anyone got this working for a macbook with non-apple remote? Any other pointers on what I could look at next?
Ubuntu Installation :: How To Test That Infrared Device Detected
Apr 4, 2010I am new to linux having just abandoned Windows due to stability issues. I have a Hauppage remote with a usb ir receiver. This worked fine under windows using the drivers for the windows media center remote. I can't however get this to work under Linux. What I am really looking for is a method, perhaps using a command line in the terminal window to be able to test and see if the OS has actually detected the device. I have tried irw, but there is no response. If I know that the device is connected, then I can start looking at issues of identifying the correct drivers for the device.
View 6 Replies View RelatedUbuntu :: Cannot Wake Up Computer From Sleep Via USB Infrared Remote?
Dec 8, 2010I have an interesting issue. I have a computer running Ubuntu 10.10. I have a wireless USB Microsoft keyboard attached to this, and I have a cheap USB infrared remote also attached to it.The wireless USB Microsoft keyboard can wake up the system from suspend. The USB infrared remote cannot.To start off, I made sure my /proc/acpi/wakeup had wakeup enabled for all usb devices.
Code:
xbmc:~$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
[code]...
Hardware :: Getting Infrared Remote Controls Working With Laptop?
Aug 4, 2010I have a new Dell Studio XPS laptop (I have used dell laptops for many many years running Fedora linux). And for the first time I want to setup the Infrared remote control in the laptop.
That is I like to set up a remote to start and stop movies and sound playback.
I installed LIRC and after reboot I see devices such as /dev/ircomm0 to /dev/ircom31 as well as /dev/irnet
So what next?
The LIRC website just goes on about using serial dongles, but nothing on setting up a laptop with a built-in IR sensor. It also talks about using irrecord, but that program complains about no /dev/lirc0 device.
I tried installing a "gnome-lirc-properties" (whcih also installed "lirc-remotes" package), but it fails with a verbose 'python traceback' that doesn't tell you what is wrong.
Fedora :: Recompile Squid To Enable - Enable-storeio - Coss
Aug 11, 2010How to recompile squid under fedora 13 to insert this arguments ---> --enable-storeio=diskd,coss
View 2 Replies View RelatedUbuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedGeneral :: How To Enable Wifi In Fedora 13
Sep 5, 2010configure wifi in fedora 13.i dont knw anything abt fedora..
View 3 Replies View RelatedGeneral :: Enable Eth0 By Default On Fedora 12?
Jul 13, 2010On Fedora 12 eth0 is disconnected (by the NetworkManager) by default until I manually enable it from GNOME. I need to make it connected even if I start my box in runlevel 3 or 4. How?
View 1 Replies View RelatedGeneral :: Enable Synaptics Touchpad In Fedora 13
Aug 24, 2010My Laptop is a Sony VAIO VPCS12C5E. I recently installed Fedora 13 (x64). I have the problem that the Touchpad is not working at all.The following Synaptics driver is installed:
xorg-x11-drv-synaptics-1.2.2-6.fc13.x86_64
Touchpad is not listed in GPointing (Version 1.5.1-2) A USB Mouse is working fine. I tried adding the following configuration to a new X11 conf file under /etc/X11/xorg.conf.d/01-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Driver "synaptics"
EndSection
I got the configuration from [URL]
General :: Fedora 14 Wifi Card Wont Enable?
Jan 19, 2011I have a clevo M760T laptop. It used to run ubuntu 10.10, recently i reformatted it to fedora 14 and now the wifi card does not work. Heres the weird thing, the wifi card has a light on the laptop's front panel that says if its "enabled" (can be seen by the O/S, in ubuntu i would have no wlan0 interface until i enabled it this way, and it wouldnt show on lspci as far as i remember).The wifi is enabled using the Fn-F11 combo. I know the F11 key works as i can fullscreen firefox with it, and I know the Fn keys as i can use the Fn-F5/6 combo to alter volume etc. No matter what i try i cant seen to be able to get that light on, or the card to appear in fedora.This may be unreleated to fedora, maybe the card has broken, but it seems odd that that'd happen right when i installed fedora. Annoyingly, I dont know what make / model wifi card it was so i dont know if its related to kernel modules or similar (and nothing showing for it in lspci). Just that it worked (including actually using it to go on the internet) in ubuntu 10.10, and does not now in fedora 14.
View 1 Replies View RelatedGeneral :: Enable Startup Options On Bind On Fedora?
Jan 11, 2010I've just configured a bind server for my home domain on Fedora 12. One thing that's buggering me is that Bind tries to do its lookups first with IPv6, which fails and then falls back to IPv4. This seems to me an unnecessary use of resources, so I'd like to turn this off. This is possible by using the option named -4, but there comes the part where. the Named start/stop script is defined in the /etc/rc.d/init.d dir, but how can I get Fedora to start this script with the named -4 option?
View 2 Replies View RelatedGeneral :: "enable Sound In Fedora 12"
Jan 30, 2010how to enable sounds in fedora 12 and i have installed real player 11 gold rpm and adobe flash player but both these are not working and several other players which came by default with the fedora too are not working i would be glad if any one find me a solution to all these
View 4 Replies View RelatedRed Hat / Fedora :: How To Enable WI-FI
Feb 25, 2010I'm trying to enable WI-FI but the system doesn't recognizes it
Code: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
Fedora :: Any Way To Enable Sound In F12?
Dec 27, 2009I installed Fedora 12 and everything seems to work fine except that I can't get sound from ....., pandora, or anything other than the weird system noises to work. I have ALSA and PulseAudio installed. Is there some simple procedure to enable sound in Fedora 12?
View 4 Replies View RelatedFedora :: Mousepad Won't Re-enable?
Jun 24, 2010i'm using F13 64 bit on an hp pavilion dv7. i turned off my mousepad today with a hardware button that is located above it and after re-enabling it my mousepad won't work. i rebooted and it still won't work. how can i re-enable my mousepad
View 2 Replies View RelatedFedora :: How To Enable Dom Extension
Aug 2, 2010i'm using fedora 13 with php 5. how can i enable the dom extension. this is being asked for some web application like the bambooinvoicing.
View 2 Replies View RelatedFedora :: How To Enable GD Support In PHP
Nov 1, 2010i am using FC11. I have installed GD and it is showing in RPM list. Copied libgd.so in php modules and made an entry in php.ini. php version is :
php -version
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'libgd.so' in Unknown on line 0
PHP 5.2.9 (cli) (built: Apr 15 2009 09:30:33)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[code]....
Fedora :: How To Enable System Log
Nov 26, 2010Whenever I try loading ksystemlog application I get an error message saying "The file '/var/log/syslog' does not exist". Can anyone let me know how do I fix this issue? Screenshot of the message attached.
View 3 Replies View RelatedFedora :: Enable The Php In Apache?
Jan 25, 2011I just 'yum installed' php and php-pgsql.I appear to have weak search-foo and cannot figure out how to enable php in apache ( the nifty php-info page does not appear, just the hello and world I put into the file before and after the php-info call ). My intent is to be able to use phpPgAdmin. So I will also need to enable the php-pgsql shared object. I need to add to httpd.conf and any other initialization that I need to do?
View 2 Replies View RelatedFedora :: How To Enable Sharing In F15
Jul 25, 2011I want to share some folders over a network but, when i right click a folder I don't see sharing option in the menu that used to be in Gnome 2 I'm using Fedora 15 with Gnome 3 .
View 1 Replies View RelatedFedora :: Enable Ctrl-alt-backspace In F10?
Mar 5, 2009The default is forbidden in F10.
View 14 Replies View RelatedFedora :: Cannot Enable Desktop Effects
Nov 4, 2009I ran "sudo yum install compiz-gnome" and when I run "desktop-effects" and click "Enable desktop effects" it just takes me back to the login screen.
View 1 Replies View RelatedFedora :: Can't Enable Desktop Effects Any More
Nov 18, 2009I have installed Fedora 12 on my laptop (Lenovo X61s) and now I have some problems with my OS. Please help me to config my machine.Currently I can not enable Desktop Effects any more. I receive this message: "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support."
I'm sure that I could enable the functions of compiz when I used fedora 11 and Fedora 12-beta on my laptop before.Besides, when I represent my slides, I can not see my screen on my laptop any more. It's dark. When I used Fedora 12-beta, I can see my screen and another screen for my representation.Is my Fedora lack of some necessary packages? Is it necessary to reinstall the VGA driver? How can I do?
Fedora :: Enable Automatic Login ?
Nov 23, 2009To enable automatic login, I edited the /etc/gdm/custom.conf file and entereted the following lines:
Code:
The automatic login is working but I still see the login box with options to select language. After a delay of few seconds, the system will automatically log me in. I don't know why I see the login window. Is there any way to bypass this window?
Fedora Security :: How To Enable MLS Policy
Feb 1, 2010I have in /etc/selinux/config:
Code:
SELINUX=enforcing
SELINUXTYPE=mls
Do I have MLS enabled? I can't use Selinux commands. I thought MLS is sort of package to Selinux. I fallowed this:
Code:
[code].....
Fedora :: Temporarily Enable All Repos?
Feb 8, 2010Is it possible to temporarily enable all repos from within the command line? It would be useful when searching for packages. ie yum enablerepo=* search tint2 (which doesn't work btw!)
View 4 Replies View RelatedFedora :: Enable Desktop Effects
Feb 22, 2010I just installed Fedora on my system. What should I do to get some nice desktop effects?Is there something that needs to be installed? or do I need to change some settings?
View 4 Replies View RelatedFedora :: Enable USB Ports On F12 With VirtualBox
Mar 13, 2010I'm here to lend your support again. I just install "VirtualBox" in Fedora12, but would like to recognize USB ports, how can I do this?
View 5 Replies View Related