General :: Cracking WEP With Aircrack And Kismet / Use It Peacefully In Unison?
Dec 25, 2010
Just a minor question, but I notice with aircrack when it lists networks, it does not list the encryption type of each network.
Which seems fair enough, as you can use Kismet, however on my machine when I end kismet and the server, the monitor interface is not removed and I cannot remove it manually, which screws with aircrack.
SO, is kismet needed to view encryption types of networks, and if so how do you use it peacefully in unison with aircrack?
View 1 Replies
ADVERTISEMENT
Feb 17, 2010
I have AT&T as a cellphone carrier, using the Pantech Breeze unit.
The SIM card is really annoying, as it has in the Contacts section seven or nine AT&T contacts and services that I do not want, but I cannot delete. I have to scroll through these annoying contacts in order to get to contacts that I really care about.
1. Does anybody know how I can delete these contacts short of using cloning software?
2. If I did use cloning which Ive never done before can I remove these AT&T contacts as part of the cloning process and use the cloned card in the phone?
View 1 Replies
View Related
Jan 20, 2011
I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine.
View 1 Replies
View Related
Feb 6, 2011
I have been playing with the aircrack-ng tools, and also Kismet to see how my networks appear. Kismet creates a monitor interface wlan0mon which it uses for scanning. With airmon-ng I can create and remove monitor interfaces, but I am unable to remove wlan0mon created by kismet. wlan0mon remains regardless of if I forcefully kill the Kismet process or exit cleanly.
airmon-ng stop wlan0mon
results in a message that monitor mode is disabled for wlan0mon, but I can find no way to remove it.Can anyone tell me why this is? I am much more interested in learning why I can't remove this interface, although a solution would also be nifty. using grimwepa with the verbose switch, but from what I could tell grimwepa never calls to use kismet.
View 1 Replies
View Related
Oct 11, 2010
how to use aircrack-ng on ubuntu 10.4? cos i actually installed it using 'sudo apt-fast install aircrack-ng' but got some error when i tried sudo airodump-ng eth1. i use dell inspiron 1545,maybe the following result will help
jiballx@jiballx-laptop:~$ sudo airmon-ng stop wlan0
[sudo] password for jiballx:
Sorry, try again.
[sudo] password for jiballx:
InterfaceChipsetDriver
[Code]...
View 3 Replies
View Related
May 13, 2011
I am trying to make a script to automatically run aircrack-ng.
1. One part of the program is an ongoing action. one that you have to press ctrl+c to cancel, but I need the script to keep running the tasks after it.
2. I need to leave one thing running while running another, so if I could like open a new Terminal tab and run things that would be perfect.
3. I need to keep it all as one script, because the variables need to stay.
View 3 Replies
View Related
Mar 1, 2011
i have installed ubuntu 10.10the wireless adapter is BCM4312when i write "ifconfig" it gives me eth1 instead of wlan0 or wlbut the wirless is working fine with me still have the problem that when i try to load airodump-ng eth1 it gives me the follwoing message:ioctl(SIOCSIWMODE) failed: Invalid argumentARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Makesure RFMON is enabled: run 'airmon-ng start eth1 <#>'Sysfs injection support was not found either
View 4 Replies
View Related
Apr 2, 2011
I was wondering how to crack WEP WiFis.I have a WEP connection and was wondering how easy it would be for others to use my internet. I have Ubuntu 10.04 Lucid Lynx. If anybody could me a link to a tutorial, it would be great. I googled it up and currently have aircrack-ng installed and am installing SWScanner.What other tools/dependencies do I need?
View 6 Replies
View Related
Nov 28, 2010
Had to happen I guess - cheap cracking on the cloud; see here
View 14 Replies
View Related
Jun 5, 2011
The previous install went down the drain because the harddrive failed. So: a new install. Due to some limitations, this is the setup (it is for a hobby, nothing pro) P4 with Debian 5, Alsa and OSS installed, Audacity (I know, Ardour, but that thing had the same issues) and a soundblaster as in/out. On the in-plug, there is a mixer panel, there are some synths hooked up. The out goes to PC speakers.
Yea, I know, nothing fancy, but...when I play, I can hear everyhting tru the speakers at pretty good quality. Given that my synth makes some white noise itself, but that's besides the point... So, I hit the record, play and hear everything crystal clear, then I rewind and hit record to record the next track and the previous track has a lot of distortion... Same with the previous setup: Jack and Ardour on a Debian 6... By the way, yes, I do have a LynxOne lying around, but I cant get the drivers...they're not free, unless I missed something...
View 1 Replies
View Related
Mar 25, 2010
I want to see how secure my company is. I am not too concerned about over the wire, more about someone hacking our wireless.
View 6 Replies
View Related
Mar 28, 2011
I'm in the process of building a Linux server using spare desktop (HP dc 7700p PC with USB wireless adapter) and of course it will be used as the wireless security training exercise so I just wondering if Ubuntu or RHEL is suitable for me to learn ?BackTrack Linux is too hard to use and doesn't automatically detect the USB wireless network card usually.
View 1 Replies
View Related
Jul 1, 2011
I have just installed squeeze 6.0.2 amd64 and noticed when I use k3b to burn/verify a disc, when it has finished burning the media it plays a sound, and rather sound is played which sounds very crackly/muffled.I do not remember this on ubuntu, and I cannot say for sure but I dont recall this happening on squeeze 6.0.1.
Sound plays perfectly in all other applications, no problems whatsoever.This is not a big deal, I just dont remember this happening. I know this isnt the most detailed posting but does anyone have any idea what this could be? I even tried to reinstall k3b through synaptics and the problem still persists.
View 6 Replies
View Related
Jul 25, 2010
I think ubuntu/canonical should start releasing a new flavour geared towards meeting needs of computer security professionals just like backtrack distro
View 9 Replies
View Related
Mar 29, 2011
I set up an ASUS WL-500gP with original ASUS firmware to my LAN with IP address 192.168.1.1. If I navigate to address [URL] in my Firefox address bar, an Authentication required window opens up asking for "User name: " and "Password: ". Correct "User name: " is "admin" and correct "Password: " is "pA55w0Rd". They work fine if I type them in manually to the Authentication required window, but for some reason I can't get in using the hydra with words.txt password file, which contains "pA55w0Rd":
Code:
[root@ ~]# cat words.txt
password
user
pA55w0Rd
[code]....
View 2 Replies
View Related
Jan 22, 2011
Ubuntu 10.10 x64 worked out of the box for me but there is one irritating issue.
I have Xonar DS(Oxygen HD Audio) with analogue 2.1 speakers and spdif passthrough to nvidia GTX260 hdmi output for my tv.
It makes random cracking noise on tv unless something is played, no matter on analogue or digital output, then is noiseless.
Alsa 1.0.23, kernel 2.6.35
View 3 Replies
View Related
Jun 1, 2010
I have heard that Kismet sees more wireless networks than the GUI tools. My question is how do I setup Kismet to work. Where do I specify my wireless card?
View 2 Replies
View Related
Apr 22, 2011
Is there a Bluetooth scanner like Kismet, or something like a scanner that any of you use?
View 5 Replies
View Related
Feb 19, 2010
i set up ssh and unison on my windows machine and i am trying to do a sync on my ubuntu machine to windows. i am running into some issues.
certain paths give me the following error: Error: The path Music/Xxxx is ambiguous (i.e., the name of this path or one of its ancestors is the same, modulo capitalization, as another path in a case-sensitive filesystem, and you are synchronizing this filesystem with a case-insensitive filesystem. When i search for Xxxx on my ubuntu system i only see it in that one Music/Xxxx location.
View 1 Replies
View Related
Aug 24, 2010
There's an error when I try to connect to an SSH server with Unison.It says 'Received unexpected header from the server: expected "Unison 2.32" but received "myuser@myhostname" ...'I use Unison for Windows as client to connect to Ubuntu Unison SSH server.Of course It is connected well from localhost to localhost with SSH,but not from a client outside.
View 1 Replies
View Related
Aug 26, 2010
I have unison set up (using the .unison/default.prf config file) to sync certain directories on my work computer with my home computer.
View 2 Replies
View Related
Apr 29, 2011
Unison-gtk on a new 11.04 machine talking to a 10.10 machine hangs. It never connects to the rsync over ssh to the destination 10.10 machine.
View 9 Replies
View Related
Jun 8, 2011
I'm having a little trouble getting unison to work on Kubuntu and can't figure out why.I have two machines. One is a dinky little box that I'm using for version control and as a file server. It has an IP address of 192.168.1.5. My other machine is a laptop with an ip address assigned via DHCP. I can ssh from the laptop to the dinky box with no problems. However, in unison, I've set up a profile to sync /home/will with ssh://will@192.168.1.5/WillHomeSync. However, when I try to connect, it just hangs on the "Contacting Server..." window and does nothing. How do I even go about starting to troubleshoot this?
View 1 Replies
View Related
Jun 14, 2010
I am doing a small research using Kismet. I need help configuring Kismet with my Asus A52J. The Wireless card in my laptop is AR5B95. When I start Kismet I get the following error
[Code]...
View 1 Replies
View Related
Dec 3, 2010
Is there anyway I could use KISMET without getting disconnected from a network. I mean now whenever I start kismet, I lose my network connectivity. I dont want that. is there any possible workaround for this?
View 3 Replies
View Related
Dec 3, 2010
I'm trying to get Kismet up and running with Ubuntu 10.10 and I'm using an Atheros AR928X, but I don't know what to put in the etc/kismet/kismet.conf file under the line source=
Do I need to install madwifi drivers, or are the drivers that come with Ubuntu sufficient enough? I've been reading other forums and on Google that I should put source=madwifi_g,ath0,madwifi but my device is not ath0, it's wlan0 as shown with the lspci command.
Launching kismet_server: //usr/bin/kismet_server
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
[Code]....
In some other forum on UbuntuForums someone said to make some changes under SYSTEM>>ADMINISTRATION>>HARDWARE DRIVERS, but I don't have HARDWARE DRIVERS under that submenu. I don't see an option for it anywhere in my version of Ubuntu (Maverick 10.10).
View 9 Replies
View Related
Dec 21, 2010
I want to use the BU-353 GPS Receiver with Kismet in a Slackware 13 64bit install. I'm holding off on buying it because, even though they have linux drivers, the only distro listed in the linux drivers section is Redhat.Will the Redhat drivers work with Slack?[URL]..
View 5 Replies
View Related
Apr 3, 2010
My system consists of a laptop running Ubuntu 9.10, a network drive (Samba share formatted fat32 the only option) and a desktop PC running Windows XP. For several weeks have been trying to set-up Unison to synchronise files between my laptop and a network drive with only limited success. I mount the network drive locally with:
sudo mount -t cifs //netdrive/store /home/gm/NAS -o guest,rw,iocharset=utf8,file_mode=0777,dir_mode=07 77.
Then in Unison (graphical interface),
root 1 is: /home/gm/Shared_Docs
root 2 is: /home/gm/NAS/HomeBackup/Shared_Docs_Backup
After clicking the �OK� button, Unison searches for changes files and I click �Go�.
An error is then produced, a sample of which would be:
�Error in renaming /home/gm/NAS/HomeBackup/Shared_Docs_Backup/.unison.Our-inv.xlsx.f3e8034159989f9de7081f9154319a2b.unison.t mp to /home/gm/NAS/HomeBackup/Shared_Docs_Backup/Our-inv.xlsx:
Input/output error [rename(/home/gm/NAS/HomeBackup/Shared_Docs_Backup/.unison.Our-inv.xlsx.f3e8034159989f9de7081f9154319a2b.unison.t mp)]�
If all files in the destination directory (root 2) are first deleted, all files are copied correctly without errors so, I think the problem may be caused by permissions where Unison is unable to overwrite the original file. I know formatting the network drive fat32 is probably making the matter worse, unfortunately I have no alternative.
View 6 Replies
View Related
Aug 15, 2011
I have a home server that houses all my files accessible over SSHFS. I am looking for a tool that can bidirectionally sync the Documents Folder on the server with the one on my netbook, so that I can keep my work-flow up to date on both regularly. (the directory in question contains mostly MSOffice files and a few PDFs. It is about 1.5GB in size, most of which never changes.
From what Ive read all the apps I mention will do the trick. Which would you recommend I use and why? Note: I am leaning towards Unison, as it seems to have good SSH support which is important (as I often have to synchronize away from my LAN). Do the other three have any speed/feature advantages which I would be missing in Unison?
View 5 Replies
View Related
Feb 5, 2009
I cant find a Kismet install in the .rpm format and I don't know how to compile it from a .tar.gz
View 12 Replies
View Related
