I want to use the BU-353 GPS Receiver with Kismet in a Slackware 13 64bit install. I'm holding off on buying it because, even though they have linux drivers, the only distro listed in the linux drivers section is Redhat.Will the Redhat drivers work with Slack?[URL]..
View 5 RepliesMy friend has a Linux base receiver and he using that receiver as a server he was asking me if he can remotely access that receiver from another computer and do the work he needs to do and be able to restart the receiver remotely. If you can do it how is it done using win xp.
View 6 Replies View Relatedi am trying to install Slackware 13.1 64bit on my HP Desktop. right now i am writing from a debian.
on the installation they ask me if i want to setup network right now.. when i press "yes" they need: name, domain, proxy etc... what is that things? :S slackware create new connection that i am going to pay extra? (pay extra money for that connection slackware create?) if i press "No" after the log in my network is not working..
my Questioni is: while i am complete the boxes on network setup (name,domain etc) slack creates new internet line that its going to pay? or not?
i have DSL Internet Acccess.
i'm fairly new to linux and i'm having a slight problem with Plane Shift. it seemed to install ok and gave no errors but every time i try to run ./pslaunch from the game dir i get this:
Code:
./pslaunch: line 5: /home/deyna/Games/PlaneShift/pslaunch.bin: No such file or directory
./pslaunch: line 5: /home/deyna/Games/PlaneShift/pslaunch.bin: Success
yes i am using the 64bit installer
I have installed (twice) slackware 13.37 64 bit on a virtual machine (vmware workstation 7). But when i try to startx the kde window starts to load and the harddrive on the kde startscreen shows and then it crashes. Anybody that running slackware 13.37 on a virtual machine?
View 10 Replies View RelatedI've opened a topic here: [URL]
View 16 Replies View RelatedI have a Brother MFC3360C printer that I would like to use. Has anyone had any success getting this printer working.? I've had it working on Fedora and Mandriva in the past but haven't been able to get it going on slackware. Printer setup recognizes it correctly but It's not in the list of available drivers for it and Brother only has 32 bit drivers for Deb and .rpm on their website, no 64bit.
View 6 Replies View RelatedI cant find a Kismet install in the .rpm format and I don't know how to compile it from a .tar.gz
View 12 Replies View RelatedAfter trying without success change from windows to ubuntu (dual-boot unsolved problems), I decided to try slack as I have seen that user to user support for slack is usually best oriented and faster.But I am having some problems in order to install slack because of GPT support. As I know its a bad idea to start to asking for help without speak what I have tried, lets to this first:
At first I tried just to boot from DVD and went through the install using the help inside the disk. It doesn't work because either fdisk and cfdisk that are suggested in help doesn't offer support to GPT.
After that first try i looked to:url
But also it suggest the use of fdisk. However, it suggested too that I could use another partition application and since I have the live cd for ubuntu, I tried to partition from there and use those partitions for installation.
At first I tried to format as ext4, but i discovered that slack still dont offer support to this format (at least the version that I downloaded).So I tried again but this time using ext3 as format to my / and /home and use the swap offered in the application for use as swap (duh!)But every time I try to install using the dvd it doesnt find my partitions with fdisk, only with the parted command I can see my partition table displayed correctly.However, every time I try to run setup it say that it didnt found and linux partition (swap also when i try to target).So this is my dilemma, I cant use fdisk, in the parted manual (url) it only says that it supports ext2 (not mention ext3) and also i dont find any command to use with parted to mark the partition as 82.I ran through this 2 other posts (url), but as I am still waiting for some update there I decided to ask it here hoping to discover that this is an easy problem.
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies View Relatedusing Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to
/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins
and i still get the same result. what am i doing wrong?
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedI bought a new laptop HP Pavillion dv3-4170ee that has Core i5 2.53ghz dual core with hyper threading, intel hd graphics and Ati Radeon HD 5470 512 mb dedicated. It came with windows 7 64bit. It also has 6 gb ram(2gb in first slot + 4 gb in the second one).I installed slackware 13.37 64 bit. It installed just fine. installed lilo onto mbr. When it boots up it shows the slackware screen. I am able to boot into windows just fine. When I select Linux it boots into linux bios data check successful. lots of stuff goes on the screen the normal linux boot stuff. and then it goes to the next screen and stays blank
Nothing happens and even the hard disk light is not blinking.By the way the HDD is Western Digital.
I have a couple questions about Xfoward.
1: How much does it affect securty, over a lan network?
2: Will it cause any other security issues?
3: The most important is can I forwad X11 from a 32 bit slackware to a 64bit slackware
I did a full install on 5.4 64bit. the installation aborted with the following errors:
View 1 Replies View RelatedI'm trying to upgrade KDE from 4.2 to 4.3 since I encountered couples of problem with it and some people suggested me to upgrade it to 4.3.
Questions:
1. Is KDE 4.3 available in 64 bit?
2. KDE consists of bunch of packages, what is the best way to start? Should I uninstall the whole current packages in my machine and then install the new ones?
3. Using pkgtool, how do I know if I remove the whole KDE packages? Are all KDE packages named that begin with word "KDE"?
4. How to do this safely so to avoid corrupting the system?
I have heard that Kismet sees more wireless networks than the GUI tools. My question is how do I setup Kismet to work. Where do I specify my wireless card?
View 2 Replies View Relatedi am runnin slackware 64 bit and trying to install eiskaltdcpp. i am new to slackware and i dont understand how it should be installed. i have found the eiskaltdcpp-2.1.1-i486-1sl.txz package but it seems it is not for my arch. i also cant find all the dependencies.
View 3 Replies View Relatedjust wondering has anyone gone through ATI Radeon HD 4830 with Slackware 13 64bit, can it be recognized correctly by HAL with built-in open source radeon drivers or it should be installed with fglrx.
View 14 Replies View RelatedIs there a Bluetooth scanner like Kismet, or something like a scanner that any of you use?
View 5 Replies View Relatedtried install kchmviewer (5.1) from slackBuilds, but it seems like it's not compatible with slackware13.0 64bit. Also tried to install firefox chm reader add on, but its also 32bit available only! Has anyone installed any kinda of chm reader on slackware 13.0 64bit.
View 8 Replies View RelatedI'm trying to install pdksh-5.2.14 in my Slackware-13.0-64 machine. Does this mean the software is not for 64bit machine? How can I fix this? The info file doesn't show me the location of the 64bit version, therefore I assume this one worked on such machine.
View 4 Replies View RelatedI installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine.
View 1 Replies View RelatedI have been playing with the aircrack-ng tools, and also Kismet to see how my networks appear. Kismet creates a monitor interface wlan0mon which it uses for scanning. With airmon-ng I can create and remove monitor interfaces, but I am unable to remove wlan0mon created by kismet. wlan0mon remains regardless of if I forcefully kill the Kismet process or exit cleanly.
airmon-ng stop wlan0mon
results in a message that monitor mode is disabled for wlan0mon, but I can find no way to remove it.Can anyone tell me why this is? I am much more interested in learning why I can't remove this interface, although a solution would also be nifty. using grimwepa with the verbose switch, but from what I could tell grimwepa never calls to use kismet.
I am doing a small research using Kismet. I need help configuring Kismet with my Asus A52J. The Wireless card in my laptop is AR5B95. When I start Kismet I get the following error
[Code]...
Is there anyway I could use KISMET without getting disconnected from a network. I mean now whenever I start kismet, I lose my network connectivity. I dont want that. is there any possible workaround for this?
View 3 Replies View RelatedI'm trying to get Kismet up and running with Ubuntu 10.10 and I'm using an Atheros AR928X, but I don't know what to put in the etc/kismet/kismet.conf file under the line source=
Do I need to install madwifi drivers, or are the drivers that come with Ubuntu sufficient enough? I've been reading other forums and on Google that I should put source=madwifi_g,ath0,madwifi but my device is not ath0, it's wlan0 as shown with the lspci command.
Launching kismet_server: //usr/bin/kismet_server
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
[Code]....
In some other forum on UbuntuForums someone said to make some changes under SYSTEM>>ADMINISTRATION>>HARDWARE DRIVERS, but I don't have HARDWARE DRIVERS under that submenu. I don't see an option for it anywhere in my version of Ubuntu (Maverick 10.10).
I have several server (mailserver, webserver and lot of fileserver) all are 32 bit slackware and I am satisfied! My company plan to upgrade our server and buy a 64 bit server maybe amd x3 or opteron? Is slackware 64 bit will help boost my server performance? Or will I stick to 32 bit for now?
View 7 Replies View RelatedThe new file can be downloaded here. (32 bit is available as well) I have installed it already, and it works on vimeo and ......
View 14 Replies View RelatedI have searched around but found no solution to my problem so here it goes. I can't have any sound on a recently (re)installed Slackware 13.1 64bit. Running alsaconf shows me an option of:hda-intel Nvidia Corporation High Definition Audio Controller hda-intel Intel Corporation 5 Series/3400 Series Chipset High Definition then I get an ok from ALSA but still no noise... alsactl store tells me that there are no soundcards found. I also get a notification from KDE telling me that the device HDA Intel (ALC269 analog) does not work. See attached KDE1.png
View 14 Replies View Related