The previous install went down the drain because the harddrive failed. So: a new install. Due to some limitations, this is the setup (it is for a hobby, nothing pro) P4 with Debian 5, Alsa and OSS installed, Audacity (I know, Ardour, but that thing had the same issues) and a soundblaster as in/out. On the in-plug, there is a mixer panel, there are some synths hooked up. The out goes to PC speakers.
Yea, I know, nothing fancy, but...when I play, I can hear everyhting tru the speakers at pretty good quality. Given that my synth makes some white noise itself, but that's besides the point... So, I hit the record, play and hear everything crystal clear, then I rewind and hit record to record the next track and the previous track has a lot of distortion... Same with the previous setup: Jack and Ardour on a Debian 6... By the way, yes, I do have a LynxOne lying around, but I cant get the drivers...they're not free, unless I missed something...
I am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
I've been using opensuse for about a week.(although I'm not completely a linux noob) I've been slowly moving more of the stuff I do on windows over to suse. I thought my sound was working fine until I decided to get mp3s running on amarok. I followed a bunch of guides which didn't work. While I was messing around with stuff I noticed a startup noise. I just assumed it didn't have a startup noise. At some point I broke all of my sound except running wine, so I reinstalled.
Now that I've noticed, none of my notification sounds work. Stuff like skype, firefox, and wine still give me sounds.
(If anyone could point me in the direction of a good place to get mp3s working on amarok would be nice as well.)
I have a HP laptop model HP G72 Notebook PC, Processor Intel(R) Core(TM) i3 CPU M 350 @2.27GHz & the Sound devices are Intel(R) Display Audio & Realtek High Definition Audio.
This machine came loaded with Windows7 & I have successfully dual booted it with Ubuntu Lucid 10.04.3.
The problem I am having is that I cannot get the sound to work at all in Ubuntu. No opening sounds or anything else that I have tried. No Web sounds, no CD sounds... All sounds work fine on the Windows side, but nothing I have tried so far seem to work with Ubuntu & I have tried many options from many threads.
lenny gives me either system sounds, or other sounds like flash plugin sounds like videos, cd playback etc., but not both. to hear videos i have to disable system sounds. as soon as i tick enable software sound mixing (esd) in system -> preferences -> sound -> sounds, videos goes. a message saying it could not open the resource as something else is using it comes up when trying to play a cd. sounds like a threading problem in some program. what should i do to get sounds to be equitably shared by all?
I was wondering how to crack WEP WiFis.I have a WEP connection and was wondering how easy it would be for others to use my internet. I have Ubuntu 10.04 Lucid Lynx. If anybody could me a link to a tutorial, it would be great. I googled it up and currently have aircrack-ng installed and am installing SWScanner.What other tools/dependencies do I need?
I'm in the process of building a Linux server using spare desktop (HP dc 7700p PC with USB wireless adapter) and of course it will be used as the wireless security training exercise so I just wondering if Ubuntu or RHEL is suitable for me to learn ?BackTrack Linux is too hard to use and doesn't automatically detect the USB wireless network card usually.
I'm trying to figure out what in the world is going on with my sound in OpenSuSE. I put in a brand new Audigy chipset soundcard and finally got some sound to come out of the speakers. I used the guide here: SDB:AudioTroubleshooting - openSUSE. to fix the permissions on my sound and am able to get sound-test to play sounds as well as connect to the sound device in my vmware and play sounds. That being said, I have terrible sound quality coming out. There is a lot of static sound like white noise and the volume of the actual sound played is very low compared to the noise. The sounds also distort somewhat.
I have tried the pulse audio change in the tutorial above also and have been searching around google. The only problem that I saw similar was a person who fixed the problem by updating KDE. I don't have KDE, I'm using Afterstep.
I have just installed squeeze 6.0.2 amd64 and noticed when I use k3b to burn/verify a disc, when it has finished burning the media it plays a sound, and rather sound is played which sounds very crackly/muffled.I do not remember this on ubuntu, and I cannot say for sure but I dont recall this happening on squeeze 6.0.1.
Sound plays perfectly in all other applications, no problems whatsoever.This is not a big deal, I just dont remember this happening. I know this isnt the most detailed posting but does anyone have any idea what this could be? I even tried to reinstall k3b through synaptics and the problem still persists.
Just a minor question, but I notice with aircrack when it lists networks, it does not list the encryption type of each network.
Which seems fair enough, as you can use Kismet, however on my machine when I end kismet and the server, the monitor interface is not removed and I cannot remove it manually, which screws with aircrack.
SO, is kismet needed to view encryption types of networks, and if so how do you use it peacefully in unison with aircrack?
I think ubuntu/canonical should start releasing a new flavour geared towards meeting needs of computer security professionals just like backtrack distro
I have AT&T as a cellphone carrier, using the Pantech Breeze unit.
The SIM card is really annoying, as it has in the Contacts section seven or nine AT&T contacts and services that I do not want, but I cannot delete. I have to scroll through these annoying contacts in order to get to contacts that I really care about.
1. Does anybody know how I can delete these contacts short of using cloning software?
2. If I did use cloning which Ive never done before can I remove these AT&T contacts as part of the cloning process and use the cloned card in the phone?
I set up an ASUS WL-500gP with original ASUS firmware to my LAN with IP address 192.168.1.1. If I navigate to address [URL] in my Firefox address bar, an Authentication required window opens up asking for "User name: " and "Password: ". Correct "User name: " is "admin" and correct "Password: " is "pA55w0Rd". They work fine if I type them in manually to the Authentication required window, but for some reason I can't get in using the hydra with words.txt password file, which contains "pA55w0Rd":
Sceanrio: Childs homework requires the use of Audacity. Of course all other students working on the project with him have Windows. So I need mp3 supported with Audacity.Error message box, "you have compiled Audacity without mp3 support"Downloaded from: YAST with an additional plug-ins (I think).What I need: How do I add mp3 support, or compile it for Audacity?Does anyone have experience with this program? And have mp3 importing and playing within it also?
Im on XP and am trying to get a 9 min piece of music from a cassette on my music centre into audacity on my comp got the line from earphone socket into the blue socket at back of comp (there are 3 sockets in a line then 3 more below them in a line go the line in socket... blue top left. )
Im getting sound ok on the comp with radio, its playing vids etc well so I cant think anything is wrong with the sound card. Playing the cassette on my music centre should get the sound into the comp and into the comp speakers.... but I just cant get a peep
Can't export an mp3 file from Audacity because it can't find libmp3lame.so. I have:- clicked the Audacity Download button on the error window- installed lame using Synaptic- installed lame, liblame0, liblame-dev and libmp3lame0 using apt-getall as per various forum suggestions. Still can't find anything like libmp3lame.so or .so.0 on my (8.04) system.
i can't record with my mic anymore. I went to do so in audacity and i only get the noise it hears through the headphones. I am recording a second vocal track. The first track is the music. I looked at the alsamixer and the mic was originally muted and i unmuted. Should line be muted when i am using the mic? I also tried to record with the mic in sound recorder but got nothing there either.
I've been trying to learn how to record my guitar parts onto Audacity using my Pod XT.I've always used Audacity to do my audio recordings since its much more user friendly than Ardour and just as capable IMO.However, I cannot get Audacity to work with the Pod.I downloaded the "line6-usb-source" using apt-get.Ubuntu seems to recognize the Pod and get a signal just fine (when I go to "Sound Preferences" it allows me to select the Pod XT as input hardware and even shows an incoming signal).When I go to Audacity's preferences,it allows me to select the Pod as the "Recording Device", however when I go to record it gives me an error saying to check the Project Sample Rate.
Does the Pod not output at 44100 Hz?Is there a way to change the sample rate the Pod puts out?Is there another setting in Audacity I need to adjust?I do not want to wine or emulate anything.I feel I shouldn't have to use a specific audio recording software to use a piece of a hardware I paid good money for.
Trying to edit some mp3's and join them together using Audacity 1.3.9 but when I try to export I get this "edit metadata" window??? I have all the libraries I believe (Lame, ffmpeg, etc.) with the right versions (I think). Running Ubuntu 9.10.
Using Debian Lenny I recorded a wav file with Audacity to burn to a cd with K3b.The problem is when I played the cd with KsCD; it wouldn't stop when it got to the end; it just kept studdering. I didn't have problems using KsCD to play CDs I had ripped and then burned with K3b.Is this a problem with KsCD, or do I need to do something when I finish the file with Audacity?
I recorded some clips on the internet through the sound card withAudacity. I exported the recording as a wave file, and burnt it to a CD. The problem is stop playing. It comes to the end and just repeats the last fraction of a second over and over.I used K3b to burn other audio CDs that I copied and didn't havea problem with KsCD playing them. Is this a problem with Audacity,KsCD or did I do something wrong?I recorded the file; saved project and then exported as a wave file
Slackware 12.0 I have installed only CDs one and two of the set of slack 12.0 CDs. According to Slack, it's all I need to make the system work. Now I've done
and I am wondering where these two files can have come from. I get the same output if I run locate as root. May be the whole audacity package is somewhere in the rest of the disk set. But I have no way to find out, except downloading them one by one and reading throu the PACKAGES.TXT files. Unfortunately, the slackware.org no longer supports its package browser.
EDIT: there is only one PACKAGES.TXT file in the distro, and it is on disc 1. And audacity is nowhere mentioned in it. Corollary: My slack distro does not include audacity. But then, what are those two files doing in my system?
I recently got my USB microphone working with Audacity under: Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) i686 GNU/Linux.What I'd like to do is use that same microphone at the following Google/Chrome link in order to convert speech to text (mostly for the purposes of automating my note-taking process.): url...But the the microphone is never recognized, so nothing happens.(And, BTW, the same microphone works fine on that same link/site when I'm using my Windoze box instead of the Linux machine.)
Here's further information: My mic (from lsusb) - Bus 005 Device 003: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
