Downloaded Red Eclipse 1.1 file redeclipse_1.1_all.tar.bz2 Cannot find instructions to install it on fedora 15 64.bit. Can someone point me in the right direction, or give info on how to install.
View 3 RepliesI am new to Linux and I am trying to work on a Fedora 8 Server. It does not have x-window installed. does anyone can give me a hand on where to find it for download and any installation instructions ?
View 2 Replies View RelatedI need to install my wireless router to my ubuntu powered Compaq C552US notebook.
View 5 Replies View RelatedI'm new to linux, have been somewhat of a computer geek my whole life and thought it about time that I delved into the world of linux. So I installed ubuntu 10.04 on my computer. I love it. However, I can't get my wireless to work. In my dorms there are no ethernet hookups, so I have to use the wireless. I typed "sudo lshw -class network" into the root terminal. The important things that I figured out was the bus info: pci@0000:4:06.0 and the pysical id: 6 (not sure if the physical id is important but it sounds like it is). I then did a lspci and found that at bus 04:06.0 it is a RaLink Device 3060. I downloaded the .tar file for the driver. I could not find instructions for it online so I followed the ones for the rt2860 driver : [URL].... I could not get it to work, It built ok and installed ok, but when I do the modprobe I get an error saying the device or resource is busy. Either that or that it cannot be found. One thing that I found weird was that I couldn't get it to build a 3060 driver, it would only build a 3562 one.
View 3 Replies View RelatedWell I downloaded an ATI driver, and there are some installation instructions:
Launch the Terminal Application/Window and navigate to the ATI CatalystTM
Proprietary Linux driver download. Enter the command sh ./ati-driver-installer-10-6-x86.x86_64.run to launch the ATI CatalystTM Proprietary Linux driver installer. The ATI CatalystTM Proprietary Linux Driver Setup dialog box is displayed.
My result:
marek@marek-desktop:~$ sh ./ati-driver-installer-10-6-x86.x86_64.run
sh: Can't open ./ati-driver-installer-10-6-x86.x86_64.run
I dual boot on separate HHDs. I have just done a fresh install with updates. I installed the restricted driver from the repositories, and I get an error message from ati catalyst (administration). Also I have "unsupported hardware" at the bottom of the screen.
Graphics card is a XFX ATI HD 5770 on this system, and I just sold 2 8800 GT's yesterday, and bought two more XFX HD 5770's for CF in my other system.
I didn't do a bad thing, 'cause I was really groovin' on Ubuntu, that I just installed at the beginning of the week.
i'm trying to install the pyirrlicht module. I have irrlicht already there but the python module has no install instructions and even less of a help forum.
View 1 Replies View Relatedlink for instructions for full cd/dvd install?
View 2 Replies View RelatedI have to create an unattended install from an USB with special instructions. Unfortunately I'm a newbie and I have no clue as to where to start. We did recieve one link to use and I still don't understand what I'm supposed to do. The link is on the CentOS home page.
View 1 Replies View RelatedI can not work with pulse. I have removed it but have failed to install ALSA in its place because the instructions I have are out of date. Could someone point me to alsa installation instructions that work with 10.10.
View 4 Replies View RelatedI'm having trouble installing it, particularly with installing cl-ppcre and clx under sbcl. The instructions for installing them using either asdf or quicklisp don't seem to work on Fedora. (cl-ppcre complains about missing cl-ppcre-unicode for example)
View 1 Replies View Relatedwhere to get the character set that includes this character "〪" and the install instructions (if any) Needed font file name is ARIALUNI.TTF owned by MS
View 3 Replies View RelatedWhat is the best guide to use for me to install Ubuntu 10.04 on my iMac so that I can dual boot into either Ubuntu or OS 10.6.4?
View 5 Replies View RelatedI have an Acer Aspire One with an SSD for storage. I recently installed Ubuntu on it and chose ext4 for my filesystem. Then I read that journaling on an SSD isn't the best idea, so I will try to disable journaling and I have found these intstructions [URL]..
# Create ext4 fs on /dev/sda10 disk mkfs.ext4 /dev/sda10 # Enable writeback mode. This mode will typically provide the best ext4 performance. tune2fs -o journal_data_writeback /dev/sda10
# Delete has_journal option
tune2fs -O ^has_journal /dev/sda10
# Required fsck
e2fsck -f /dev/sda10
[Code]...
I will use them on my boot partition. Are there any particularly bad parts here, or are there any missing steps? Will my boot partition be fit for being on an SSD after this? Or should I consider switching to ext2, or even reinstall it all and choose ext2 at partitioning time (I'd rather not though, since I've configured quite some stuff already)?
I am trying to upgrade from Fedora 12 to Fedora 13 using "Preupgrade" but it fails in the last part and tells me that the system cannot find the previous system (fedora 12). I have tried to do the upgrade several times and always the error is the same.
View 3 Replies View Relatedsomebody recommend a good wine for running ms office and give a source for installation instructions?
View 3 Replies View RelatedI have an old PC running 900Mhz Tbird CPU and 768Mb RAM. I also upgraded the HDD to a 60Gb. I've tried to install Gentoo, CentOS, Ubuntu, and Linux Mint and all and everyone of them stop at the line "checking hlt instructions" during the installtion. I've looked over the web and there are quite a few cases with the same problem, nonetheless the solution is not clear to me, still. I've managed to install CentOS, though, with the help of web forums, bypassing the error by typing from the Kernel "linux no-hlt" and pressing enter. Now when I rebooted the machine it keeps doing even though the install completed succesfully. I'm interested in loading CentOS to build a server since I used to run Ubuntu 8.04 on that box without any problems.
View 2 Replies View RelatedI could not find vlc to install. I use to be able to install it by just typing:
yum install vlc
I installed myphpadmin using yum but I cannot find the GUI for it. Also I cannot get mysql to work It's not under any menu item and I cannot seem to find it.
View 11 Replies View Relatedfind and install the module iBCS. I use Fedora 15 (2.6.40-4.fc15.i686) and I need to run DataFlex programs,which requires the installation of this module to function.
View 3 Replies View Relatedshell scripting in Fedora14I want a script"Find in curent folder for files, and it copy first file he find with name gived by user, if name already exist then echo error message and finish"command usage " bash scriptname copyASname"
smthing like Code: #!/bin/bash
for files in /home/user/*
do
[code]....
I have a ps3, and I want to put Fedora Core 11 on it. But i don't know how. (i've already downloaded the Fedora Core 11 PPC)I can't find tutorials for the install of this version. (Sorry, I don't speak english very well) In my PS3 , I used Yellow Dog Linux (it is too slow, and bugged), Ubuntu 8.04 (lol, it dont support HD resolutions).I use my PS3 in the same monitor of my PC. (). 22" LG Monitor.
View 3 Replies View RelatedI downloaded Fedora-12-x86_64-DVD.iso and placed it on a 16GB USB drive using the Windows LiveUSB creator which had downloaded when I first download Fedora 11.The USB boots fine and I choose the language and the the keyboard layout. I tell it the image is on the USB drive it displays /images/install.img as the image.
However after going through all the steps up to choosing where I want it throws an error saying cannot find image #1 on the hard disk.Now if I boot again and instead of choosing the USB drive I hit F2 and then choose the USB drive then /Images then the install.img and press O.K. it says it isn't and just cycles around the choose drive/image.
Im following the instructions to download and install ubuntu, using a USB stick from this site I cant post URLS yet (not 15 posts) but it was the ubuntu download site.
Step 1, downloaded 32 bit ubuntu file
Step 2, clicked on USB stick, and windows and show me how.
Insert a USB stick with 2gb DONE Download universal usb installer DONE Click run... DONE
Selected UBUNTU 10.10 from the dropdown list DONE And here is where I got stuck Click Browse and open the downloaded ISO file. Well I went to the place I unzipped the ubuntu files, NO ISO FILE.
I cant find a Kismet install in the .rpm format and I don't know how to compile it from a .tar.gz
View 12 Replies View RelatedI would like to add the koji repo but i can not find the rpm to install it. where I can get it?
View 10 Replies View RelatedFirst time linux user, am trying to install a fresh full install of Fedora 12 dvd i686 version. I have two identical sata drives, which fedora fails to identify. Have reset the bios, changed settings in the bios, still not finding them. I have an asus av8-x motherboard, with a athlon dual core processer.
View 5 Replies View RelatedI am trying to install a piece of software that uses an install.pl script which looks to /usr/src/linux/include/ for my kernel headers...but it never finds them or that directory/link.
I've run "yum install kernel-devel kernel-headers" so I am pretty sure they are installed.
My "rpm -qa | grep kernel" returns code...
What am I missing?
i have dell mini 10 in fedora 13. How i find the wireless driver and install, this the list of hardware:
Quote:
[*******@**** ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]...
I've tried installing dig on Debian, but the apt-get utility doesn't seem to know what it is. Is it part of some larger set of packages? Where can I find this?
View 1 Replies View Related