Fedora Installation :: F12 Can't Find Hard Drives To Install

Dec 11, 2009

First time linux user, am trying to install a fresh full install of Fedora 12 dvd i686 version. I have two identical sata drives, which fedora fails to identify. Have reset the bios, changed settings in the bios, still not finding them. I have an asus av8-x motherboard, with a athlon dual core processer.

View 5 Replies


ADVERTISEMENT

Fedora Installation :: 13 Installer Can't Find Hard Drives

Sep 3, 2010

The Fedora installer won't display my two SATA hard drives. I've tried both the x86_64 live CD and DVD. On the live CD, fdisk -l displayed nothing. However, if I click "Specialized Storage Devices" a devices shows up as "BIOS RAID set (stripe)" with a capacity equal to both my hard drives. I don't even have RAID enabled in BIOS - it is set to AHCI. Other os installers display the hard drive correctly.

Specs:
2x 640GB western digital caviar blacks
ASUS M4A78T-E 790GX motherboard

View 2 Replies View Related

Ubuntu Installation :: Windows Is Unable To Find Any Hard Drives?

Nov 18, 2010

I had installed windows XP and then Ubuntu a few months ago. I was mostly using Ubuntu only. My Ubuntu is up to date. Windows XP got the blue screen and i had to re-install it. So, i used the Disk Utility and formatted my C-drive as NTFS with a boot flag.

After that, when i attempted to install windows XP on my C-Drive that i just formatted, Windows Setup is unable to recognize any drives! I really don`t want to uninstall Ubuntu or format my whole HDD, just to install windows XP. But i also want to install windows XP as i have to run some applications in it!.

View 9 Replies View Related

Fedora :: Can't Find Two Hard Drives After Installing F11 X86_64

Nov 13, 2009

I recently installed Fedora 11 x86_64 (dual boot with XP) and am having difficulty finding two of my three hard drives to mount them. This is my setup: 80 GB Hard drive (boot drive) with two partitions, one for XP (NTFS) and one for F11 (ext4). 2x250 GB Hard drives, one is formatted with NTFS, the other one has yet to be formatted (my plan is to use ext4).

All of my drives are SATA, on the same nVidia controller. After the install, I can see only the 80 GB hard drive (both partitions). What do I need to do to find the other two drives? During the install, it called the partitions /dev/sda0, sda1, sda2 and sda3, but I no longer see these drives. If I knew where the drives were I could mount them, but my systems just isn't seeing the drives.

This is the output of df:

Code:

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_user-lv_root

[code]....

View 6 Replies View Related

OpenSUSE Install :: Find Hard Drives On System - Motherboard With Two SATA Controller Chips

Aug 2, 2010

I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!

1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)

2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.

3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?

View 9 Replies View Related

Debian Installation :: Dual Install - 2 Hard Drives On Same Pc

Aug 5, 2011

I have searched for this but can not find it. I want to install debian 6.0 squeeze on to both of my hard drives and run each as a seperate instance of debian, and be able to choose at boot up which one I want to run. I have an HP with 2 500 gig hard drives, running windows vista currently, processor is an intell quad 2 core 6600, nothing else on the pc for programs and such at this time. I would also like to keep the windows if possible to run other programs at a later time.

View 10 Replies View Related

Ubuntu :: Can't Find One Of Hard Drives

Sep 27, 2010

Earlier I had two physical hard drives in my computer, one with Windows and one with Ubuntu. Now I have a new computer and have installed these hard drives in it. I run Windows 7, and I can find the Windows disk, but not the Ubuntu disk. This doesn't surprise me, as Ubuntu is another filesystem, however, earlier I could format it with a partition manager, but now I didn't even find it with that!

View 9 Replies View Related

Ubuntu Installation :: Wubi Install Doesn't Work - Didn't See Main Hard Drives

May 28, 2011

i installed ubuntu desktop 11.04 on my acer aspire one 751h and found that the wifi didnt work. the netbook remix was the same so i went through all the previous releases up until 8.0.4.4 which worked fine on the live cd. so i tried to install but the installer didnt see my main hard drives only the usb i was using to install. so i tried using wubi installer which only left me with this screen when i tried to load up ubuntu.

View 3 Replies View Related

General :: Centos 4.4 - 3 Of 4 Hard Drives Removed Now Won't Boot- Can't Find?

Jan 15, 2010

centos 4.4 - 3 of 4 hard drives removed now won't boot- can't find lv so kernel panic

View 2 Replies View Related

General :: Hard Drives Information / Can To Find RAID Level?

Apr 22, 2010

I know my Linux Servers have RAID but I want to know

1. Can I find RAID level?
2. how to find Disk information...I mean if it's not possible to get RAID Can I get how many hard drives and the real size?

View 2 Replies View Related

Fedora Installation :: Dual Boot Vista - No Hard Drives Or Partitions Are Shown

Feb 9, 2009

i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.

i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .

View 9 Replies View Related

Fedora Installation :: Configure Grub To Ended Up Messing Up MBRs Of Both Hard Drives

Aug 26, 2009

I currently have a clean installation of Windows on the Primary drive (13gbs) and I want to install Fedora 11 on the other (7gbs). Should I install grub on the Windows hard drive or will Windows hate on me for that? Earlier I tried installing grub on the slave with the Fedora system, but I had trouble configuring Grub in a way that it would understand and I ended up messing up the MBRs of both hard drives.

View 1 Replies View Related

Fedora :: Can't Access Any Of The Other Hard Drives From The Other Drives?

Jul 5, 2011

I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.

View 7 Replies View Related

Fedora Installation :: Using The F10 Live CD To Setup Software RAID 1 Between 1 Hard Drives For Redundancy & Fstab

Apr 15, 2009

I have been battering with FC10 and software RAID for a while now, and hopefully I will have a full working system soon. Basically, I tried using the F10 live CD to setup Software RAID 1 between 1 hard drives for redundancy (I know its not hardware raid but budget is tight) with the following table;

[Code]....

I set these up by using the RAID button on the partition section of the install except swap, which I set-up using the New partition button, created 1 swap partition on each hard drive that didn't take part in RAID. Almost every time I tried to do this install, it halted due to an error with one of the raid partitions and exited the installer. I actually managed it once, in about...ooo 10-15 times of trying but I broke it. After getting very frustrated I decided to build it using just 3 partitions

[Code]....

I left the rest un-touched. This worked fine after completing the install and setting up grub, reboot in to the install. I then installed gparted and cut the drive up further to finish my table on both hard drives. I then used mdadm --create...etc to create my RAID partitions. So I now have

[Code]....

View 2 Replies View Related

Fedora Installation :: F11 Drivers For ASUS P5L-VM 1394 - Procedure Fails To Recognize The Hard Drives

Aug 10, 2009

I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:

1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.

2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.

Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.

View 1 Replies View Related

Ubuntu Installation :: Install Ubuntu On Two 250-gigabyte Hard Drives In A RAID 1 Array?

Apr 4, 2010

I'm about to install Ubuntu on two 250-gigabyte hard drives in a RAID 1 array, but I'm confused about how to partition my hard drives. How much space should I give to each partition? How many partitions should I create and where should I mount them? (I should mention that Ubuntu will be the only OS on this array.)

View 3 Replies View Related

Fedora Installation :: 13 Can Find The Sda Hard Drive?

Jun 20, 2010

"Disk sda contains BIOS RAID metadata, but is not part of any recognized BIOS RAID sets. Ignoring disk sda" That's the message showing on the screen. I used to install the fedora 12 is no problem at all. And last time I see fedora 13 come out, then I want to try it. I also try my different destop, it also coming the same thing. don't know what happen? Could any one answer my question. This is my first time here.

View 4 Replies View Related

Ubuntu Installation :: 10.4: Install Disk Doesn't Find The Hard Drive

May 20, 2010

When I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?

View 3 Replies View Related

Fedora Installation :: F11 Upgrade Does Not Find Hard Drive?

Jun 12, 2009

Seen this posted several times, currently running F10 and cannot upgrade to F11 as it does not find the hard drive.
AMD 64
SATA HDD
Used these boot options: acpi=off pci=nomsi

View 2 Replies View Related

Fedora Installation :: F11/12 On SB700 \ Cannot Find The Hard Disk In Machine?

Jan 8, 2010

I cannot install F11/12 into Sata hard disk with AMD SB700 neither full installation image or live image in USB drive. It cannot find the hard disk in my machine. But all the things are working fine with F10 installation. Does anyone have the same issue

View 5 Replies View Related

Ubuntu :: Install On Multiple Hard Drives?

Sep 1, 2011

I am doing a new build with an SSD / HDD combo, and I am wondering, is there a way I can install Ubuntu spread across both drives? I know I can do this in Fedora, but I haven't seen much of a feature like this in Ubuntu.

View 9 Replies View Related

Installation :: Multiple OS On Two Hard Drives

Mar 18, 2009

i am new in Linux. i have two drives one IDE and other SATA in my computer.i want to keep windows XP , WIndows 2003 server on one drive and two flavours of linux on the other drive, let say oopen suse and redhat.please help me how i install these sofwares to make multi boot the machine.

View 2 Replies View Related

General :: Install Ubuntu Without Taking Over 2 Hard Drives?

Feb 28, 2011

I have 2 hard drives and when I do an auto install.. Ubuntu decides to take both hard drives... how do I prevent this from happening without my intervention?

View 2 Replies View Related

Ubuntu :: RAID Or LVM - Adding Two Hard Drives After Install

Oct 30, 2010

I have the newest Ubuntu installed on my machine. It currently has a 160GB sata drive. I just bought two shiny new 2TB drives that I want to RAID as 4TB. How do I go about adding these two hard drives even though install is complete? I want the 4TB assigned to my /home directory.

View 4 Replies View Related

Server :: 2 Separate External Hard Drives With ESata To Minimize An Electrical Failure To The Drives?

Mar 26, 2011

I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data

View 10 Replies View Related

Debian Installation :: Installer Does Not See Hard Drives

May 20, 2015

I'm trying to install jessie on a new computer, but the installer does not see the hard drives. I copied the DVD-1 iso to a usb stick with dd (also tried the netinstall) and it boots, but when I get to partitioning, it only sees the usb drive. If I go to another virtual console and run dmesg or fdisk -l, all drives are seen correctly.

Back up a little - at first I tried the on-board raid, but when the installer couldn't see the drives, I went back into the bios and reset the sata mode to ahci. I've got it set to use bios/legacy OS, or whatever it's called, fast boot is disabled. Even if only one drive is connected, the debian installer does not see it. Then I read up on the fake raid I was trying to use and decided to go with software raid. Can't do that if there's no hard drives listed in the partitioner.

My own installer (refractainstaller) does work, and I've installed jessie with it a couple of times onto one drive, but I really wanted to use raid and lvm, and my installer doesn't do either of those things. No optical drive, but if that's the only way to install, I'll pull the one from my current box and use it for the install. I think I still have a blank CD or DVD lying around.

Hardware:
ASUS H97-PLUS LGA 1150
Intel core i3 (the cheapest one at newegg)
WD Black 1TB drives (2)
GSkill cheap memory, which already passed a memtest.

View 4 Replies View Related

Ubuntu Installation :: 10.04 - Not Finding Hard Drives

May 23, 2010

Having a little problem with 10.04 installation. I have two hard drives installed on my PC. One that had Hardy Heron and one data. When the install program launches from a CD boot, it fails and drops me to a live session to check out the problem. I can see both drives and mount them but if I then launch the installer, it does not give either as an option for installation.

View 4 Replies View Related

Ubuntu Installation :: No Hard Drives Are Recognized

Jul 18, 2010

When i try to install ubuntu 10.04 on my desktop i get through the first 3 steps which are Language, Region, and Keyboard. when i get to Prepare partitions, there is nothing there (same problem with 9.10). I followed the steps of another thread about removing the raid settings and I am sure i did that correctly but it did not work, when i try to find my drives in terminal they can not even be found.

Both of my drives are SATA, one is 250gb, other is 500gb. They are both recognized by other operating systems. I have switched the SATA headers that they are plugged into. I really am just not sure what else to do here. Im not totally stupid at linux, ive been using it for a few years and i have taken two classes for linux in the past year. I really feel dumb for not being able to figure this out :/

View 1 Replies View Related

Ubuntu Installation :: Not Recognizing Hard Drives?

May 1, 2011

Alright so i'm trying to install ubuntu 11.04 except it's not recognizing my hard drives. I have two 80gigs plugged in via sata. And neither of them are being recognized by ubuntu. I have tried plugging them in together, and separately, still nothing. I'm getting pretty frustrated. Ubuntu 11.04 just doesn't seem to be working for me. I can run from the liveCD, but i get no unity desktop environment

View 3 Replies View Related

Ubuntu Installation :: How To Partition The Hard Drives

Sep 1, 2011

I am installing Ubuntu on my server that has 2 2tb disk drives. My plan for this server is to set it up as my web server (using apache), will need a mysql database and would like a ftp site. I could really use some advice on how to partition the hard drives.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved