I've recently installed redhat 9 and I'm trying to connect to the internet using a wireless card. I'm able to connect to the network and get to the router webpage @ 10.0.0.1 But whenever I open firefox to connect to web the page/server cannot be found error.
I tried going to terminal and using route add default gw 10.0.0.1 but still doesn't work
Have Ubuntu 10.10 and have ASUS USB-N13 to connect to my Cisco Valet Plus. I have downloaded .inf files and have the adapter blinking and the wireless network recognized by Ubuntu with strong signal, but as soon as I get message 'connection established' and I try to open Firefox I get error message 'Server not found'. I have used WIcd Network manager and WiFi Radar, but still unable to connect.
View 1 Replies View RelatedLast night I decided to take the plunge and put ubuntu on my laptop but now I can no longer connect wirelessly. can anyone offer any help or advice? I have always relied on windows so have very little knowledge of linux. It may help to know that i "accidently" installed on the whole disk.
View 14 Replies View RelatedI am not able to get wireless internet working on Ubuntu 10.04. I have a Wireless PCI card, Netgear WG311v2.I can't connect to the router, even though I downloaded the Windows drivers using Ndiswrapper.
View 4 Replies View RelatedI am running Jaunty, and trying to connect my TV to my PC wirelessly. Can anyone suggest a PCI card that I can use for this job that will work out of the box ?
View 3 Replies View RelatedAfter years of neglecting to get into Linux (for no real reason other than being lazy and decently content with Windows), I've not been shoved head first into the Linux world due to a Linux class I am taking. I've only been in the class for two weeks, so sorry about my lack of Linux knowledge! Anyway, I've downloaded and installed Ubuntu (using wubi, off of Windows 7 on a Sony Vaio VPCF1) and I'm having a few problems.
The main problem is that I can't connect wirelessly to the internet. Using ethernet works great, but I need to be able to take my laptop to class so I need to figure out how to get this working. The only thing I've tried was to check System> Admin> Hardware (or something along those lines?) to see that it said I have no peripherals connected. I don't even know if that is the right place to start, again.. The next problem is that the mouse-pad does not work. This is not a huge problem as I have a wireless USB one that works great, but still something I'd love to learn how to fix, if only for the knowledge of how to.
After that... is it possible to change resolution in Linux? I assume yes, how? And final question! Is this all something to do with wubi? Would it be better to do a dual boot with Windows 7, or would that even make much of a difference?
I've got a Linksys WRT54G v2.2 and a SmartAX MT882 modem I can connect to the Internet by connecting a Ethernet cable from the computer to the router but not wirelessly. I did the following to get it setup from my computer, can anyone see what I may have missed?Now connect the MT882 Ethernet cable directly into one of the WRT54G's LAN ports. Now once the computers are connected they will ask for an IP address and the WRT54G will forward them to the MT882's DHCP server for an address and thus you will get multiple computers through wireless connected to the MT882 and the Internet.
View 4 Replies View RelatedI am having problems connecting to my Fedora machine wirelessly. What i mean is that if i try to access samba \192.168.1.93 rb while connected to my wireless network i can't connect.The only way I can connect to this machine is if i connect my laptop directly into the router then i can successfully connect.Does anyone have any idea why this is happening? The strange this is i used to could connect wirelessly.
View 1 Replies View RelatedI have 2 computers,one is connected directly to internet with a classic rj45 cable. it has a usb wireless dongle too (ralink)the second has a usb wireless dongle but no network card.is it possible to connect the second computer to internet through the first? (second computer connect to the first computer through wireless and through it to internet)infact in first computer share internet with usb dongle.
View 1 Replies View RelatedI recently installed Ubuntu on my parents IBM Thinkpad T41. Everything is great except for the only thing they use it for and thats the wireless internet. When I click on the connection icon on the desktop it picks up a strong signal but wont connect.
View 2 Replies View RelatedI have an Compaq Mini 700 which has a busted hard drive. I'm trying to get Ubuntu onto a USB disc to use the internet. I have tried Ubuntu Netbook Remix and Desktop and neither will connect wirelessly. A wireless icon appears with an ! indicating a problem. When going into Hardware Drivers there are 2: Broadcom B43 wireless driver and Broadcom STA wireless driver - neither are activated. Trying to activate the first results in an instant error: "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log". The second goes through the process of installing and results in an error. When trying to install anything it all results in some kind of error. How can I get the wireless card working? I believe it is a broadcom.
View 5 Replies View RelatedIs there a way to set this up? What information should I post?
View 1 Replies View RelatedI am trying to install ubuntu on an HP Pavillion dv7 laptop. The installation worked just fine. However, I cannot connect to our Linksys router wirelessly.
View 3 Replies View RelatedI just installed ubuntu 9.10 netbook remix (karmic koala) on my eeepc so im pretty new to linux but getting the hang of it. i was running windows before and the wireless and wired connections were perfectly fine. when i installed ubuntu, i chose it as my main system and wiped windows. now i cannot connect to the internet through the ethernet cable or wirelessly. even though i put in the right ip adress etc it doesnt work. the wireless doesnt even pick anything up so i uninstalled network manager. i installed wicd network manager and that doesnt pick anything either. BTW using a Ralink RT2860 network card.
View 4 Replies View RelatedI am running openSUSE 11.2 and just recently my network has been down. I'm using Gnome, but using Yast to configure my network (I'm usually forced to use wireless as I travel a lot on my laptop). Usually, when I'm connected to a wireless network, it will show up as so in the Gnome start menu, but recently, it will only say Wired there, even though I have nothing connected to my ethernet jack. I can connect wirelessly to a home router, but cannot use the wireless in any other way. I have tried manually disabling the ethernet connection to no avail. Unfortunately I am limited in my linux knowledge, so I am kinda stuck here.
View 1 Replies View RelatedI'm not completely new to ubuntu, I've been using it for about 6 months, my laptop, suddenly decided to no longer let me connect wirelessly, it was mid pidgin conversation, I couldn't even tick the box to enable wireless. So I read in one of these posts that one person had to reinstall their wireless driver to get it working again. so I uninstalled my driver (Broadcom STA) however when I went to activate it, all I get is the error message installation failed and to look for log "/var/log/jockey.log" and here I admit that I'm not knowledgeable about computers since I'm not sure where to look for the log and also what the log would mean.
View 1 Replies View Relatedi have a dell inspiron 1764 windows 7. it will connect wirelessly fine on windows 7 side but when i boot to ubuntu cant detect network or anything. what do i need to do.
View 3 Replies View RelatedI upgraded Ubuntu to 11.04 I can NO longer connect wirelessly using my BCM4312 WLAN Card. It connected with no problems before dist upgrade using Ubuntu 10.04. Im really not sure why I cannot connect. I cannot even see my router in edit wireless connections settings. I can however see my neighbours routers who are using WPA2 encryption. But I cannot see my router.
I have uninstalled and reinstalled The Broadcom STA proprietry wireless driver several times using Additional drivers. This did not fix my issue.
I am connected by ethernet at the moment so I do have internet connection.
I have been trying to wirelessly connect to my network for weeks now. My netgear dongle is fully working. I have installed the driver using ndiswrapper. I can see my network and signal is excellent; everything is working perfectly. When I try to connect it thinks about it but never connects. The password is fine; it works great with other computers. decided to have a go with wicd, so got rid of the Gnome network manager and installed wicd. Adaptor and wicd appear to be working brilliantly EXCEPT I cannot connect. wicd tells me its a bad password. Password fine because it works brilliantly with every other device I connect to my network. If I remove security from network, it tells me it cannot get address, even though it sailed passed that with no problem when there was security. I have searched the internet for a solution to this problem time and time again. Lots of people seem to be having this problem, but no one knows the solution. Is there a solution? It happens with both Ubuntu 10.04 LTS v1 v2 and Ubuntu 11.04. What the heck is going on. This happens with WPA WEP and anything else I try to use
View 1 Replies View Relatedis there any way to recover deleted files and folders in redhat9.because one of my user delete one folder through samba.please advise me or any other recover tools.
View 4 Replies View RelatedHow can i install redhat9 on sata hard disk.
it always ask for drivers & i didn't find it.
I have samba server. but winxp and vista supports to share files and folder.but windows7 not supported. i am using very old version redhat9. but i cant able upgrade lot of informations is there. please how can access folders in window7 through samba in redhat9.
View 1 Replies View RelatedI am trying to connect an Ubuntu 10.04 desktop system wirelessly to another desktop that is directly connected to a cable modem via dlink wireless router and ethernet card. I have not been able to connect on the second system (Ubuntu) to the wireless router.
View 9 Replies View RelatedI have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I have a non-broadcast network (ad-hoc?) that I attempt to connect to via openSUSE 11.2 running off live USB. It does nothing. It never connects and when I view it with available networks it just shows the name and "insecure" (even though it's WPA2Personal) and no percentage.How do I get wireless to work?
View 4 Replies View Relatedi am having trouble getting my wireless internet to work on ubuntu 9.10. i just installed today and it works perfectly fine when connected with the cable. i right click the network connection on top and the "enable wireless networking" is not there. only the "enable networking". i have a dell laptop and there is a switch in the front that enables the wireless adapter when i use windows. but on putting the switch into the on position it doesnt turn on, it stays off. i was hoping that someone would be able to help me, i dont want to have use an ethernet cable everytime i use my laptop.
View 1 Replies View RelatedI am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies View RelatedI have One Server HP proliant Ml150 G5 with ARRAY Controller and I want to INSTALL REDHAT9 But OS When I install REDHAT9 IT gives NO hard disk Found ON HP SITE there is no driver for array controller for REDHAT9
View 5 Replies View RelatedI just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.
I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies View Related