I have One Server HP proliant Ml150 G5 with ARRAY Controller and I want to INSTALL REDHAT9 But OS When I install REDHAT9 IT gives NO hard disk Found ON HP SITE there is no driver for array controller for REDHAT9
View 5 RepliesHas anyone installed Lenny successfully on the HP Proliant ML150 G6 platform?
View 2 Replies View RelatedI try to install linux Slakware 8.0 on HP Proliant 350ML server. I can boot from the CD but then anytime I do fdisk /dev/sda I see a message that the hard drive cannot be accessed. Is there anyting I can do to secceed?
View 11 Replies View Relatedtry to install opensuse 11.2 on HP ProLiant DL160 G6 Server ? i want to know if it's compatible with this server.
View 8 Replies View RelatedHow I can install SUSE 11 on HP-proliant-D380 server after windows 2003 server that already installed.?(I want to keep Windows)
View 2 Replies View RelatedI've been trying to install Fedora14 on HP ProLiant ML330 server but it doesn't recognize
HP Smart Array P410/512 BBWC controller, and thus won't see HDD's(Raid 1).
HP site lists only theese drivers:
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 Itanium
[Code]...
How can i install redhat9 on sata hard disk.
it always ask for drivers & i didn't find it.
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies View RelatedWe have purchased Hp Proliant DL 380 G6 server after Raid 5 configuratin when i boot server from fedora or redhat bootable cd and i select "install fedora", after this installation cd is not able to detect hard drive or not able to copy required file in server.
View 3 Replies View RelatedHP Proliant Server will not boot to O.S. Upon power-up system performs POST and finally starts looking for bootable device...3 are listed CD-ROM, ?, SCSI.
And then falls into a loop here. No errors that I recognize (I'm newbie to LINUX). Server has 6 SCSI drives and using the SMART START CD, are testing ok. I've broken down box to minimum hardware requirements and was even trying to boot in Safe Mode, if there is even such a thing for Linux.
I am running mandriva 2010.0 Kernel 2.6.31.5-server-1mnb for my web, mail, dns and ftp server. the problem is i couldn't run webmin on that server because of Mandriva can not detecting the graphic adapter
The server is HP Proliant DL160 G6, and the graphic adapter is ATI ES1000. i need the driver
I have a proliant dl120 server, with centos 5.4 and I want to monitoring the temperature and fault of the server but the software of hp seems don't work. I have tried to install lm-sensor follow this guide [URL] but the result is:
[root@serverhost bus]# yum install lm_sensors
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centos.intergenia.de
* base: centos.xengage.it
* extras: centos.xengage.it
* updates: centos.intergenia.de
Setting up Install Process
Package lm_sensors-2.10.7-4.el5.x86_64 already installed and latest version
Package lm_sensors-2.10.7-4.el5.i386 already installed and latest version
Nothing to do
[root@serverhost bus]# sensors-detect
# sensors-detect revision 5291 (2008-06-23 23:40:46 -0700) .....
I have Hp Proliant 370 G machine, when i installed windows server 2003, it does not making any fan noise. and I have installed RHEL 5, its continous making fan noise start from booting to till power off the system. my question is why it is noising and how to set it at rest.
View 2 Replies View RelatedI'm installing Centos 5.5 on a HP ProLiant DL180 Server with ~8 TB of hard disk (4 disks that have been pre-RAIDED), from an installation DVD.
Normally when I get to the partitions screen, I would select "remove all partitions etc".
But this gives me an error message "Your boot partition is on a disk using the GPT partition scheme but this machine cannot boot using GPT. This can happen if there is not enough space on your drives for the installation."
Pressed OK, tried the other three partition options but they led to the same outcome.
Tried Advanced storage configuration: Showed that there was one hard drive (c0d0) with ~ 8 TB of space.
I figured I should create a root sector, set one up with 100 MB of space, ext3, set the mount point as /.
Created a software raid of the remaining space.
Trying to go "next" gave me a similar error about GPT partition scheme. Trying various other configurations all gave similar errors about the GPT scheme.
What do I need to do? Some earlier hard format of the disk or something?
I'm having a great deal of time getting Lucid Server up and running on my Compaq Proliant ML330 G2. I've put a thread up in installing and upgrading, but people there don't seem to have any ideas about my problem. Since I figured there would be a higher concentration of server users here,
I've got a Proliant ML330 G2, 2 1.4 GHz PIV's
A dvd and CD drive on IDE1 (I'll explain why in a moment
A 65 gb hdd on IDE2
and four 40gb hdd's on hardware ide raid.
I've tried everything, but I can't get the sucker to boot. Installing to the raid array doesn't work. Some array setups won't partition, and others aren't even recognized as arrays. I've tried disabling the raid array and installing to the IDE hdd (my original intention) but I just get bad system disk errors. It would be exceptionally helpful if anyone has one of these boxes, or has worked on one, but I'm willing to take advice from any direction at this point.
I have a HP ProLiant DL380 server and I am trying to install Debian on it.
I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.
I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.
I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]
Is this a kernel mismatch between my Deb. version and the driver?
And after many try my server started hanging at detecting network hardware stage, how can I deal with this?
Also finally I started to get this...
[url]
Is this happening because I am using wrong architecture CD?
I have i386 image and my server has 2 x Pentium 3 processor.
I have an HP ProLiant DL560 server with Debian 6.0 installed and cannot figure out how to get the fans to run at anything except high. I have searched google and this site, but cannot find anything that works on Debian 6; the SLES packages will install, but don't do anything.
Server Specs:
HP ProLiant DL560
4x Intel Xeon 2.20GHz processors
6GB RAM
2x 72.8GB 15k rpm SCSI HDDs (Raid 1)
2x power supply
how to setup RAID on a Compaq Proliant DL580 G1 Server. Currently there is no OS installed. I used the SmartStart CD but there is no option to setup RAID. When I put in the boot CD for CentOS 5 it recognizes individual hard drives not a RAID Setup.
View 4 Replies View RelatedI recently purchased HP Proliant Microserver with the idea of having it as a home server running Amahi. I added one 2TB hard disk to the already installed 250 GB drive. The Microserver has no cd/dvd drive so I created a bootable pen drive using LiveUSB Creator tool from Fedora 14 installation DVD iso image. However, I ran into problems in the very first phase though I struggled hard, juggling i386, x64, Live images...
Now, for i386 Fedora: The machine successfully boots from the pen drive but after selecting language and keyboard, the installer does not see the installation image - or even the pen drive at all - saying "No driver found". Then, I can only open "Select Device Driver to Load" (screenshot) where I can only see whole bunch of drivers I have no idea which of to select. I tried "USB mass storage driver for Linux", nothing happened, I'm returned back to "No driver found". Haven't found the "HP NC107i PCI-Express Gigabit Ethernet Server Adapter" driver in the list...
x64 Fedora: Same result, though x64 at least recognizes the HDDs that are already in the box (screenshot) so I can try to use image files unpacked on the second one (ext4 formatted). Then, the installation proceeds till the point of formatting the installation drive when it suddenly "Cannot find ISO 9660 image" (screenshot) and I cannot but Exit.
Live x64 image: I tried the Live bootable image from the same pen drive - it booted and installed correctly and at the first glance the system was working fine, connecting to the internet, downloading updates etc. However, this is not my option because I didn't have the option to add additional Repository during the installation from Live image (as it is in this guide, search the page for "Add the Amahi repository"). why the installation is not working in my setup?
I Can't install SLES 9 SP3 (Novell OES SP2) on HP ProLiant DL 320 G5p
SATA 82801GR controller
LSI Logic SAS1068 Fusion-MPT PCI-X
HP 8 Internal Port SAS HBA with RAID
SATA CD-Rom TEAC DV-W28S-RS
INTEL e1000 2 port NIC
It seems no CD-Rom was found by SLES as well as no NIC was found. So I can't start install nor using CD or LAN. I started booting from OES SP2 CD 1. The boot loader started normally, but when I chose Installation it says Could Not Find the SLES 9 Installation CD. Activating Manual Installation.
Here in the manual installation screen I check System Information - Hard Disks and CD-Roms It says No Hard Disks or CD-Rom drives have been detected so far Then
1. I erased the BIOS/HD through RBSU
2. downlaod Driver Diskette for HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) for SUSE LINUX Enterprise Server 9 (x86)
3. startfed installation again.
Now I can see in the manual installation screen - System Information - Hard Disks and CD-Roms MY RAID 1 ARRAY 278GB, but still NO CD-ROM, NO NICS at ALL. Also I have recently updated all firmware, tried changing CD/DVD-Rom adding ordinary SATA HDD, and the result is the same - no CD, no HDD is seen. So I suppose the linux kernel doesn't support my motherboard SATA channels? Additionally, I tried to install SLES 10 SP3 (OES2) and it was success, all the hardware were detected including CD and NICs How can I add driver prior to installation or install using my array HDD?
I've recently installed redhat 9 and I'm trying to connect to the internet using a wireless card. I'm able to connect to the network and get to the router webpage @ 10.0.0.1 But whenever I open firefox to connect to web the page/server cannot be found error.
I tried going to terminal and using route add default gw 10.0.0.1 but still doesn't work
I have a Compaq server, as per the title, and I wish to install Ubuntu Server onto it but ran aground when I found it got to trying to run the installer after the CD Boot menu, it just stopped there, waited 180 seconds (as per the error's details) and then locked up with the Caps Lock & Scroll Lock lights on the keyboard flashing.
Now I know it's not the server, as I have installed other OSes onto it in the past, including an older version of Ubuntu server (9.04), I did try and re-install the 9.04 version but the CD I had was too scratched up and got to a point in the installer (copying files) where it just failed cos it couldn't read the disc.
The specs of the thing are:
Dual PentiumIIIs 1.4GHz
512mb RAM (keep meaning to upgrade it)
3x 18.2GB 10k SCSI HDDs (Storage)
[code]...
Not sure what else is in there, but the full specs are on the web...
I want to install Suse 11.3 on a Proliant server. I thought not to take the obvious Windows CD's (little sorrow now) and try Linux. I used an USB Live CD to start. I tried all the startup options like apci=off and so on. Also tried lower resolutions and VESA. Still no luck. After running and starting (seeing in ALT-F4 the Kernel loading), all ALT screens get a blank black screen. Only option is to restart, while then SUSE is displaying it is going down.
View 7 Replies View RelatedI'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.
View 10 Replies View Relatedis there any way to recover deleted files and folders in redhat9.because one of my user delete one folder through samba.please advise me or any other recover tools.
View 4 Replies View RelatedI have samba server. but winxp and vista supports to share files and folder.but windows7 not supported. i am using very old version redhat9. but i cant able upgrade lot of informations is there. please how can access folders in window7 through samba in redhat9.
View 1 Replies View RelatedVMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies View RelatedI have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies View RelatedI need to install centOS 5.6 64bits in a server HP Proliant DL 165 G7, with four SAS hard disk, a controller array, 32Gb RAM and two processors... I have some experience creating software raid but it's first time i try to install a hardware raid.
For the moment, i began editing the option RAID into the bios and after that create a RAID 10, but now... What steps have i to follow to install centOS? CentOS installer recognize me the raid or have i to install some kind of driver in the beginning to installation process?
note: I found some diskettes from HP, but im not sure if that works to me: [URL]