My laptop connects fine wirelessly but when I try connecting with the cable it won't connect. I have tried an identical laptop and that connects fine so it must be the laptop but I don't know why.
View 15 Replies
I powered up the acer aspire one zg5 and it goes to the first screen but does not connect to the internet when I press the internet button the wifi connection is fine and will download updates fine but will not connect to the browser, am so out of my depth as not familiar with this system , if I dont fix this will have to blame one of the kids.
View 1 Replies View RelatedI haven't had a problem with this yet, but today I was online via my wifi connection and then the network center said there was no connection. My modem said I had full bars, and I tried restarting both the modem and the laptop, but nothing. The internet works if I plug in the ethernet cable, but will not pick up the wifi signal. I called my service provider and for 2 hours they couldn't figure out how to connect it because it has Linux. They tried to set up a new password protected network because they said the modem was working fine, so they had me delete the old network from the computer... but when I tried to set up a new network it still was not picking up a wireless signal. Ive tried flicking the switch on the front of the laptop and it still will not pick up a signal. Please help me out with this... I have no clue how to use Linux!
View 5 Replies View RelatedMy landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
View 1 Replies View RelatedFor some reason, Ubuntu will not connect to a wireless network. It will occasionally connect, but I will open a page and it will not load. Soon after it would disconnect.
View 2 Replies View RelatedI usually used freebsd. Now I decided to try linux and selected CentOS 5.5. I installed it on my notebook Acer Aspire 5930G (I tried both i386 and x86_64 versions) and I have problems with cable networking. I selected static network configuration during install. Internet access is working via NAT on freebsd server.
I can ping anything in my LAN, I can ping any host in internet, nslookup works fine, but nothing else isn't working. I can't wget even in my LAN, can't connect to FTP server in my LAN etc. The same with internet hosts. Iptables turned off, iptables -l shows that all chains are in ACCEPT. SElinux turned off. NAT for accessing internet works fine - when I reboot to windows 7 with same network config internet is working. I guess this could be problem with driver for my NIC - Marvell Yukon 88E8071 PCI-E Gigabit Ethernet. But I can't change it on notebook :)
Maybe they made a change without changing the model number? I have an Acer aspire 5517 bought last Friday, and with Ubuntu 9.10 the wired network came up fine, I upgraded with latest fixes today, but it stil doesn't recognise the wireless interface at all, not "network connections" window, not "ifconfig -a".
View 1 Replies View RelatedI searched everything before posting this, and tried every solution, but so far no luck, i will post my info, and hope someone smarter then me can solve this? Wireless works fine in windows, but apears disabled in ubuntu lspci -nn
Code:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603]
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604]
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
[Code]...
the laptop has no bluetooth chip, so i am not sure where "acer-bluetooth" is coming from. Also i am quite familar with linux, so no need to hold my hand, i am just not sure what to do next in this situation. (if this makes solving this easier)
PS: There is no 'hardware switch' on the laptop, but there is a Fn+F3 key combination which does nothing. network-manager shows on startup 'Enable wireless' with no check next to it, checking it 'Enables' it, but the wireless remains disabled.
I just installed Fedora 12 x86 in an Acer Aspire One D250. Everything ran smoothly and was detected upon install but unfortunately after all updates were applied to it I ended with a device with no network connection (not even Ethernet).
This appears to be kernel-related because the old kernel (stock) works as expected. The problematic kernel version is (2.6.32.9-70.fc12.i686).
Is there any known workaround for this? Or am I condemned to run this older kernel until the other one gets fixed?
Another question, in the event a new kernel comes out I'd like to keep to older one as a back up, how can I arrange that?
I'm running Kubuntu and Windows on the same machine but when I swap over to Kubuntu I can't get the wireless to work. The lshw command returns network disabled but the machine can see that there is a wlan0 connection.
I've been trying to install the broadcom Linux driver from their site but the instructions fall apart at step 3: cd bnx...version/ ( directory just created by tar). I'm guessing this is because I don't have a Live CD (after almost a week of trying to burn a disc I just broke down and got Wubi) but that doesn't change the fact I have no idea what to do now or if this will even work.
If it makes any difference, the wired connection will also occasionally die mysteriously after about 30-60 minutes of use and refuse to re-activate but work fine when I switch over to Windows or just plug it into the router.
I have a new Acer Aspire One, model D250-1958. It uses the Atheros AR928X. I've tried Ubuntu Netbook Remix 9.10 and Ubuntu Netbook Edition 10.04, as well as the conventional Ubuntu. Everything works beautifully, except no wireless. The netbook picks up the signal, but when I provide the Key it fails to connect, and eventually prompts me for the key again.
I've tried to research this on my own, but haven't found a solution. In particular, the solution reported by narnie for his Acer Aspire One D250-1584, <HERE>, didn't work for me.
I'd really like to get this working. The netbook will be much less useful if it can't make use of our wireless router.
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies View RelatedI have a problem with certain web sites, mainly BBC when the page just disappears and it just reverts to my desktop.I tried installing more up to date version of Firefox but it keeps on happening- mainly it seems when BBC site has fancy graphics.
View 14 Replies View RelatedI have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
View 3 Replies View Relatedmy aspire one netbook which uses linux will not start. when i press the power button, it starts booting then will just give me a blank screen. my problem is that i dont know my system user password so can go into setup.
View 1 Replies View RelatedI have a ACER Aspire laptop with a webcamera. how to use it? I have Ubuntu 10.04 installed.
View 5 Replies View Relatedi have lost internet on acer aspire one when i tried to add firefox 3.6 and cannot solve the problem.....i have tried several times and nothing works, it tells me it either failed or is unknown..... i can't even get back to firefox 2....everything was ok until i added adobe flashplayer and when i rebooted to make it work there was no internet at all and it's my sisters netbook not mine.
View 1 Replies View RelatedThe acer netbook D255e - N57 comes with a factory installed linux OS but Acer reps seem unable to fully instal Ubuntu 10.1 or 10.04. Even linux lite lacked the drivers to run several things. Is it possible to do this??? If it can be fully installed I will definitely go for a new cyber life with linux but if not I may have to remain a thrall to bill gates and go for a Eee PC netbook instead.
View 1 Replies View RelatedI have an Acer Aspire One Netbook that has lost connection with the Internet. On clicking the Browser button I get a message saying "Your wired device is now connected" - but nothing happens. It was working fine up till about a week ago. A substituted computer will work OK from the same output from the Router/ Modem through the same cable.
View 1 Replies View RelatedPackage gnome-bluetooth-2.28.6-2.fc12.i686 already installed and latest version so that's done.I'm certain I have a bluetooth adapter inside my laptop, however when I go to System > Preferences > Bluetooth, the started program says there are no bleutooth devices.There is a hardware button with the bluetooth symbol.
However :
[root@jonas Jonas]# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)[code].........
I bought a Acer Aspire One A110-Ab Netbook, Linpus Linux Lite version, 512MB DDR2 RAM, 8GB NAND Flash
Just for openers, I don't understand how you "open" (?) "load" (?).EXE files or make them happen.I have been using Windows all my life & to remember you just CLICK on a .exe file and it just 'happens'
Specifically, I am in Turkey and had to purchase a dongle from a Turkish phone company to access the Internet. When I insert the dongle, it shows the relevant .EXE file but when I click on it, nothing happens. No-one here knows LINUX.
I just one to talk to someone who has the same ACER as me and who can guide me through with GREATED simplicity (really idiot instructions would be fine).
I installed Ubuntu 10.10 on a Laptop Acer Aspire 3000 everything works perfect... excluding.... the Wireless Networks.
1. I cannot check marked Enable Wireless
2. Wireless Network disabled
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following:
1. I tried rfkill unblock all with negative results
2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes
3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: ferris@sowerseed.aw
Howto install a printer on Linpus Linux from Acer Aspire one?
View 1 Replies View Relatedno internal record or web cam, hence no phone capability either with Skype. Acer will have zero warranty conversations due to OS system change. Previously the machine was crashing mostly while using Open Office
View 3 Replies View Relatedmy old firefox is obsolete. I've downloaded 3.6, successfully as far as I can see, but it's just sitting there on the hard drive as a file, it doesn't start up, I just get the same old version 2 which came with the machine and it's dead in the water really.
View 5 Replies View RelatedI currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
I have no fracking clue what my password is and I want to create multiple user accounts. I have no idea whether or not I need to re-install the OS or what..nor can I even begin to imagine how to do so without a CD drive..I should also note I didn't start her up myself.
View 1 Replies View RelatedMy sd slot is not working at all, doesn't recognize it. I think it may have something to do with having the desktop version installed but I could be wrong. I was only introduced to linux 4 weeks ago and am not very familiar with it, but already know I like it more than windows! I have tried three different sd cards and they all work in my other laptop with Windows 7.
View 5 Replies View RelatedI have finally had a enough of windows and i want to change my laptop to linux, firstly what is the best distro that people recommend, i am trying to decide between ubuntu, fedora, mandriva and ultimate.
Secondly how do i go about installing all the drivers on a acer aspire 5920G laptop, and where can i download these from?
I recently installed ubuntu 10.10 on my aspire 3000 and everything seemed to work just fine... until I tried to activate desktop effects. tu put it simple, it just don't work. I checked and doubled-checked the lsmod | head to make sure that my drivers (sisfb / sis_drv.so) were installed and loaded. they were. I then made sure that my pc was opengl-supporting (Glxinfo | grep "direct rendering". The answer was positive. With that in mind, I tried many different ways to run compiz(compiz --replace, appearance-desktop effect, run app-compiz) but neither if these gave any results.
View 1 Replies View Related
