General :: Unable To Set Desktop Effects On Acer Aspire 3000
Mar 18, 2011
I recently installed ubuntu 10.10 on my aspire 3000 and everything seemed to work just fine... until I tried to activate desktop effects. tu put it simple, it just don't work. I checked and doubled-checked the lsmod | head to make sure that my drivers (sisfb / sis_drv.so) were installed and loaded. they were. I then made sure that my pc was opengl-supporting (Glxinfo | grep "direct rendering". The answer was positive. With that in mind, I tried many different ways to run compiz(compiz --replace, appearance-desktop effect, run app-compiz) but neither if these gave any results.
View 1 Replies
ADVERTISEMENT
Mar 12, 2011
I installed Ubuntu 10.10 on a Laptop Acer Aspire 3000 everything works perfect... excluding.... the Wireless Networks.
1. I cannot check marked Enable Wireless
2. Wireless Network disabled
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following:
1. I tried rfkill unblock all with negative results
2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes
3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: ferris@sowerseed.aw
View 3 Replies
View Related
Jul 25, 2011
My landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
View 1 Replies
View Related
May 7, 2009
Have a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
Here is the result of my iwconfig:
View 14 Replies
View Related
Feb 27, 2010
After a bit of a mess up i ended up reinstalling UNR on my acer aspire one. Have everything running as it was before except that i can't enable desktop effects. I don't know why this is as i had them working before. I am running the exact same version (9.04) and the desktop effects worked out of the box the last time. I don't know why i'm having a problem this time.
View 1 Replies
View Related
Apr 24, 2011
My sd slot is not working at all, doesn't recognize it. I think it may have something to do with having the desktop version installed but I could be wrong. I was only introduced to linux 4 weeks ago and am not very familiar with it, but already know I like it more than windows! I have tried three different sd cards and they all work in my other laptop with Windows 7.
View 5 Replies
View Related
Oct 30, 2010
Today my Menu Bar and WiFi icon disappeared from my desktop. How can I get it back as I am no longer able to connect to the internet , seee my battery status or log out ?
View 3 Replies
View Related
Feb 6, 2011
I just installed ubuntu desktop version 10.10 on the laptop..it uses an ATI MOBILITY RADEON X700 everything worked fine except the monitor does not work properly after closing the lid/ suspend..... when it wake up from suspend, the monitor looks like as if it is broken
View 2 Replies
View Related
Mar 3, 2011
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
View 4 Replies
View Related
Feb 27, 2010
When trying to hybernate the system tries to prepare to hybernation but when it is going to complete the operations it does not hybernate but finally suspends.
note that it is not exactly the same as choosing to suspend. In fact, it seems to me that when choosing to hybernate the system is unable to do it and consequently it chooses "at least" to suspend.
Ubuntu 9.10 fresh install
Kernel 2.6.31-19-generic
~$ lspci | grep Graphics
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
[Code].....
View 3 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Jul 23, 2010
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
View 1 Replies
View Related
Jul 7, 2011
I installed mint 10 gnome when am trying to enable the desktop effects it says "desktop effect cannot be enabled and something like cant find window manager".
View 1 Replies
View Related
Feb 25, 2009
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies
View Related
Jan 23, 2011
I have a problem with certain web sites, mainly BBC when the page just disappears and it just reverts to my desktop.I tried installing more up to date version of Firefox but it keeps on happening- mainly it seems when BBC site has fancy graphics.
View 14 Replies
View Related
Jan 19, 2011
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
View 3 Replies
View Related
Mar 22, 2010
my aspire one netbook which uses linux will not start. when i press the power button, it starts booting then will just give me a blank screen. my problem is that i dont know my system user password so can go into setup.
View 1 Replies
View Related
Aug 26, 2010
I have a ACER Aspire laptop with a webcamera. how to use it? I have Ubuntu 10.04 installed.
View 5 Replies
View Related
Dec 15, 2010
i have lost internet on acer aspire one when i tried to add firefox 3.6 and cannot solve the problem.....i have tried several times and nothing works, it tells me it either failed or is unknown..... i can't even get back to firefox 2....everything was ok until i added adobe flashplayer and when i rebooted to make it work there was no internet at all and it's my sisters netbook not mine.
View 1 Replies
View Related
Feb 1, 2011
My laptop connects fine wirelessly but when I try connecting with the cable it won't connect. I have tried an identical laptop and that connects fine so it must be the laptop but I don't know why.
View 15 Replies
View Related
Jun 5, 2011
The acer netbook D255e - N57 comes with a factory installed linux OS but Acer reps seem unable to fully instal Ubuntu 10.1 or 10.04. Even linux lite lacked the drivers to run several things. Is it possible to do this??? If it can be fully installed I will definitely go for a new cyber life with linux but if not I may have to remain a thrall to bill gates and go for a Eee PC netbook instead.
View 1 Replies
View Related
Feb 4, 2011
I have an Acer Aspire One Netbook that has lost connection with the Internet. On clicking the Browser button I get a message saying "Your wired device is now connected" - but nothing happens. It was working fine up till about a week ago. A substituted computer will work OK from the same output from the Router/ Modem through the same cable.
View 1 Replies
View Related
May 28, 2011
Package gnome-bluetooth-2.28.6-2.fc12.i686 already installed and latest version so that's done.I'm certain I have a bluetooth adapter inside my laptop, however when I go to System > Preferences > Bluetooth, the started program says there are no bleutooth devices.There is a hardware button with the bluetooth symbol.
However :
[root@jonas Jonas]# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)[code].........
View 1 Replies
View Related
Aug 10, 2010
I bought a Acer Aspire One A110-Ab Netbook, Linpus Linux Lite version, 512MB DDR2 RAM, 8GB NAND Flash
Just for openers, I don't understand how you "open" (?) "load" (?).EXE files or make them happen.I have been using Windows all my life & to remember you just CLICK on a .exe file and it just 'happens'
Specifically, I am in Turkey and had to purchase a dongle from a Turkish phone company to access the Internet. When I insert the dongle, it shows the relevant .EXE file but when I click on it, nothing happens. No-one here knows LINUX.
I just one to talk to someone who has the same ACER as me and who can guide me through with GREATED simplicity (really idiot instructions would be fine).
View 5 Replies
View Related
Dec 30, 2010
I powered up the acer aspire one zg5 and it goes to the first screen but does not connect to the internet when I press the internet button the wifi connection is fine and will download updates fine but will not connect to the browser, am so out of my depth as not familiar with this system , if I dont fix this will have to blame one of the kids.
View 1 Replies
View Related
Jan 9, 2011
I haven't had a problem with this yet, but today I was online via my wifi connection and then the network center said there was no connection. My modem said I had full bars, and I tried restarting both the modem and the laptop, but nothing. The internet works if I plug in the ethernet cable, but will not pick up the wifi signal. I called my service provider and for 2 hours they couldn't figure out how to connect it because it has Linux. They tried to set up a new password protected network because they said the modem was working fine, so they had me delete the old network from the computer... but when I tried to set up a new network it still was not picking up a wireless signal. Ive tried flicking the switch on the front of the laptop and it still will not pick up a signal. Please help me out with this... I have no clue how to use Linux!
View 5 Replies
View Related
Apr 10, 2011
Howto install a printer on Linpus Linux from Acer Aspire one?
View 1 Replies
View Related
Sep 3, 2010
no internal record or web cam, hence no phone capability either with Skype. Acer will have zero warranty conversations due to OS system change. Previously the machine was crashing mostly while using Open Office
View 3 Replies
View Related
Feb 24, 2010
my old firefox is obsolete. I've downloaded 3.6, successfully as far as I can see, but it's just sitting there on the hard drive as a file, it doesn't start up, I just get the same old version 2 which came with the machine and it's dead in the water really.
View 5 Replies
View Related
May 13, 2011
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
View 14 Replies
View Related