Ubuntu Networking :: Acer Aspire One D250-1958 W/ AR928X - No Wireless - Netbook Picks Signal - When Provide Key It Fails To Connect
May 13, 2010
I have a new Acer Aspire One, model D250-1958. It uses the Atheros AR928X. I've tried Ubuntu Netbook Remix 9.10 and Ubuntu Netbook Edition 10.04, as well as the conventional Ubuntu. Everything works beautifully, except no wireless. The netbook picks up the signal, but when I provide the Key it fails to connect, and eventually prompts me for the key again.
I've tried to research this on my own, but haven't found a solution. In particular, the solution reported by narnie for his Acer Aspire One D250-1584, <HERE>, didn't work for me.
I'd really like to get this working. The netbook will be much less useful if it can't make use of our wireless router.
View 7 Replies
ADVERTISEMENT
Jun 29, 2011
My Acer Aspire one D250 laptop running Ubuntu 10.10 wireless does not work. I dual boot with Windows XP BUT windows XP wireless works fine. here are some details you might need.
[Code]...
View 6 Replies
View Related
Feb 17, 2010
Aspire One D250 wlan/ethernet not working on centos 5.4i have tried alot, searchingon net to findout the both lan card drivers for my new aspire one d250 but coudn't find out. Please help me in finding and installing the drivers. infact i have seen alot people searching for the same but no one has successfully installed any of the lan.
View 2 Replies
View Related
Jan 26, 2011
I've just worked out how to get the wireless card working with an Acer Aspire D260 wireless card to work.
Enter terminal command;
sudo apt-get install wifi-radar
Then reboot ubuntu 10.04 after it has installed, network manager should now detect wireless networks in range and allow connection, right click network manager icon and select "Enable Wireless" or "Disable wireless" as required to turn on or off. So many others have had problems getting the wifi to work with Acer Aspire D260 netbooks and ubuntu 10.04.
View 1 Replies
View Related
Feb 16, 2010
Just installed 9.10 netbook remix on my acer aspire one - No Wireless !
search showed all kinds of comments but few solutions most just claimed it worked or others tried madwifi without success.
View 2 Replies
View Related
Mar 9, 2010
I'm using netbook Acer Aspire One D250-0Bb pre-installed Windows XP. Now i have Gentoo. I have trouble with Xfce (lastest stable version) , where my keyboard don't react. I can move just with touchpad. I think, it's in X-server driver, but i can't find any information about that.
View 2 Replies
View Related
Nov 13, 2010
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
View 9 Replies
View Related
Mar 28, 2010
I just installed Fedora 12 x86 in an Acer Aspire One D250. Everything ran smoothly and was detected upon install but unfortunately after all updates were applied to it I ended with a device with no network connection (not even Ethernet).
This appears to be kernel-related because the old kernel (stock) works as expected. The problematic kernel version is (2.6.32.9-70.fc12.i686).
Is there any known workaround for this? Or am I condemned to run this older kernel until the other one gets fixed?
Another question, in the event a new kernel comes out I'd like to keep to older one as a back up, how can I arrange that?
View 11 Replies
View Related
Jan 5, 2010
I just got My new acer aspire one netbook D250-1842 and I need some help pls, with finding the download that will work with my computer.
View 8 Replies
View Related
Jan 14, 2010
Code:
leopard@brokenbox:~$ lspci | grep Ethernet
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Code:
leopard@brokenbox:~$ ethtool -i eth0
Cannot get driver information: No such device
Code:
leopard@brokenbox:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
[code]....
I have had this issue before, and fixed it by booting into Windows XP SP3 and pressing and holding the power button down until the computer shuts down. (e.g. "Unclean or "Illegal" or "Cold" boot.) Unfortunately, not having Windows XP SP3 on my system anymore, I have to do this in Ubuntu. I have tried several times, and it is clearly not working. I don't want to try too many times more for fear of damaging my ext4 file system.
I looked for this issue on Google and found only driver problems, not device problems. There is no Ethernet option in the BIOS, except for the Network Boot, which should always show the device whether its in use or not. Is it silly to ask if Windows in a VM in an unclean shutdown may solve the problem? The driver for the device is currently supported by the kernel out of the box:
Code:
Linux brokenbox 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
It uses/used the atl1c driver. It was working on the same install just about a day ago!
View 9 Replies
View Related
Jan 18, 2011
I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO
The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.
View 1 Replies
View Related
Nov 24, 2010
For some reason, Ubuntu will not connect to a wireless network. It will occasionally connect, but I will open a page and it will not load. Soon after it would disconnect.
View 2 Replies
View Related
Jan 23, 2011
after finally getting this machine tot run with ubuntu i am now on an ethernet connection because all of a sudden, my wireless says its disabled. When iwconfig is entered, it shows my wlan 0 but says power management : off. It is so frustrating because I feel like there should just be a button that says to switch it on haha. Please help, my wifi was working, and after a boot it is no longer.
View 1 Replies
View Related
Apr 29, 2011
This bug has been around for years now?!? Surely this can be fixed by now, would somebody please feel this very common issue. I've installed Ubuntu 11.04 on my Acer Aspire One 110AB netbook and everything seems to work fine except the wireless - I can connect via ethernet no problem.
While the wireless can scan for networks - it seems them but they seem to be rather weak signals and also no matter never connect UNLESS I turn off ALL WEP/WPA security clearly not an option.
View 4 Replies
View Related
Aug 29, 2010
I usually used freebsd. Now I decided to try linux and selected CentOS 5.5. I installed it on my notebook Acer Aspire 5930G (I tried both i386 and x86_64 versions) and I have problems with cable networking. I selected static network configuration during install. Internet access is working via NAT on freebsd server.
I can ping anything in my LAN, I can ping any host in internet, nslookup works fine, but nothing else isn't working. I can't wget even in my LAN, can't connect to FTP server in my LAN etc. The same with internet hosts. Iptables turned off, iptables -l shows that all chains are in ACCEPT. SElinux turned off. NAT for accessing internet works fine - when I reboot to windows 7 with same network config internet is working. I guess this could be problem with driver for my NIC - Marvell Yukon 88E8071 PCI-E Gigabit Ethernet. But I can't change it on notebook :)
View 2 Replies
View Related
Mar 22, 2010
I had UBR installed and working fine for a month or so, wireless and everything. Then I did a clean re-install while trying to add WinXP to half of my drive.Anyway, with the new install, my wireless chip (BCM4312 802.11b/g) isn't switching on at all. I've tried installing the Broadcom driver that appears when I run Hardware Drivers, but that doesn't help.With the old install, the wireless switch and indicator light on the front of the netbook worked, now nothing.
Output from lshw -C network is:
*-network
description: Network controller
product: BCM4312 802.11b/g
vendor: Broadcom Corporation
[code]....
View 4 Replies
View Related
Apr 26, 2010
I just installed Ubuntu on my computer, and it will not display wireless.I researched other posts and found something to do to display info, perhaps someone will be able to tell me what is wrong?
View 9 Replies
View Related
Mar 22, 2010
my aspire one netbook which uses linux will not start. when i press the power button, it starts booting then will just give me a blank screen. my problem is that i dont know my system user password so can go into setup.
View 1 Replies
View Related
Jan 31, 2010
It's a Acer Aspire 4520 Laptop running Vista Ultimate. All Drivers are working fine except Wireless. No wireless adapter is shown in Device Manager. Acer website was no help at all, has the drivers but no adapters for download. This laptop shows that it has Acer signalUp, also shows 802.11b/g WLAN on the sticker. I've downloaded Athero AR??? wireless driver, did not do anything to help the problem, downloaded the broadcom one also and it did nothing. Works fine on the LAN cable but no wireless.
View 1 Replies
View Related
Feb 20, 2010
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
[Code]....
View 2 Replies
View Related
Jun 18, 2011
I have just installed Ubuntu 11.04 in my acer aspire 4710z laptop. After logging in, I am not able to turn on Wireless Radio, hence not able to connect to my wireless router.
arindam@arindam-ubuntu:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]...
View 2 Replies
View Related
Jan 5, 2010
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies
View Related
May 7, 2009
Have a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
Here is the result of my iwconfig:
View 14 Replies
View Related
Aug 30, 2010
I have followed the directions to install the Netbook Edition onto my Acer Aspire One via usb drive. When I created the USB using the Universal USB Installer app, I created a 1GB persistence on my 4GB USB. I now want to install rather than run from the thumb drive, except when I get to partition area, it's showing no drives at all. I had XP, but I'd like to use the entire disk for UNE now. how to get it to install?
View 7 Replies
View Related
Sep 13, 2010
after messing with fstab + mtab, my aspire one netbook completely failed , so i rebooted using a live USB. My desktop and default settings were restored. When i tried to install firefox 3 (default browser is firefox 2 ), yum hangs and refuses to do anything. I tried deleting and reinstalling yum, and it was mostly successful until i tried the "make" command which according to bash does not exist. how to install make without using yum?
View 5 Replies
View Related
Mar 21, 2011
I recently installed Ubuntu 10.10 onto my Acer Aspire D260 netbook.I find it much easier to use than Windows 7.Everything has been working fine until I recently tried going on the internet via battery power instead of my A/C charger. My update manager is showing that I am up to date and Additional Drivers is showing that the Broadcom STA wireless driver is installed and in use.
View 2 Replies
View Related
May 13, 2011
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
View 14 Replies
View Related
May 10, 2010
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies
View Related
Jul 30, 2010
I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.
so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...
"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"
View 2 Replies
View Related
Dec 2, 2010
I have been using my Acer Aspire One Netbook, with Linux Lite v1.0.13.E as loaded on purchase, happily for a year or so. Yesterday, when I clicked on the Browser picture to open up Firefox, nothing happened. I can't find how to access anything which will let me check if the icon has lost a link. I have looked on the File Manager and can see the .mozilla folder but don't know what to look for, nor what to do from here.
I have now managed to add the sub-menu which was linked to here: [URL] as a way to Install apps. I can now use this directory to try and open Firefox Web Browser - I then get the message "Failed to execute default web browser Input/output error.
View 14 Replies
View Related
