General :: Acer Aspire One D255e - N57 And Ubuntu Installation?
Jun 5, 2011
The acer netbook D255e - N57 comes with a factory installed linux OS but Acer reps seem unable to fully instal Ubuntu 10.1 or 10.04. Even linux lite lacked the drivers to run several things. Is it possible to do this??? If it can be fully installed I will definitely go for a new cyber life with linux but if not I may have to remain a thrall to bill gates and go for a Eee PC netbook instead.
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following: 1. I tried rfkill unblock all with negative results 2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes 3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: firstname.lastname@example.org
I've got an Acer Aspire AM3920 (Intel Core i5) Desktop PC. I want to upgrade my Ubuntu Maverick Meerkat to Natty Narwhal, but it just isn't working. I've tried to upgrade two times, both resulting in a crash while installing. When I try to install it from a Live CD, I'm getting a black screen and when I press a key in the purple screen of the Live CD and select nomodeset, it doesn't work either. So my question is: Is it possible to install/run Ubuntu 11.04 on this PC?
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
I have an Acer Aspire 5610 and since installing Ubuntu 9.10, the computer tends to shutdown by itself while I'm using it. Does this happen to anyone else? I would like to know what's causing this so I can either fix/solve it. I never had this problem on Ubuntu 9.04, 8.10 or 8.04. Checking the system log file viewer hasn't given me any clues to what's causing this. I just know the issue started when I installed 9.10.
I am a new user of Ubuntu, I use Ubuntu 10.04 Lucid Lynx on my laptop Acer Aspire 4741G and the specification are:
1. Intel(r) Core(tm) i5-430M Processor 2. Intel(r) HD Graphics 3. 2GB Memory 4. HD LED LCD
I have a problem in adjusting brightness, before this laptop, I used Ubuntu on my Acer Extensa, all shortcut buttons are working properly, include Fn button. To adjusting brightness, I only have to push Fn button + arrow left or arrow right. And now, I try in Aspire 4741G, it does not work. I also try to type command via terminal:
I have followed the directions to install the Netbook Edition onto my Acer Aspire One via usb drive. When I created the USB using the Universal USB Installer app, I created a 1GB persistence on my 4GB USB. I now want to install rather than run from the thumb drive, except when I get to partition area, it's showing no drives at all. I had XP, but I'd like to use the entire disk for UNE now. how to get it to install?
Is there a problem with Intel video cards and 11.04? I have tried upgrading and using a live CD and live USB with the same results on this notebook. After upgrading or booting off live CD/USB, I see a black screen, not lit. I can here the login prompt and when I press [Enter] and type my password I hear the Ubuntu theme which means everything is up, but still have a black screen. If I try to go to a console, I am still working with a black screen. Yikes ... I know my Live CD is ok, because it boots fine on my Lenovo S10-3 netbook.
Upgraded from Ubuntu 10.10 32 bit, live CD is 11.04 32 bit. Hardware: Acer Aspire 5732Z with Intel Mobile 4 series chipset integrated graphics controller (rev 09) and 3Gb ram.
flashing the BIOS in my Acer Aspire 5720z. Issue is that fan won't switch on since update to Natty and so laptop overheats and shuts down. I know the risks and I'm pretty sure these issues are BIOS related so I am wanting to do it. The file from Acer is BIOS_v1.45.exe file and can be further extracted. Files are InsydeFlash.exe, iscflash.dll, iscflash.sys, platform.ini, CL50145A.fd, iscflashx64.sys. I have tried a few different methods and the closest I have come is creating a Dos Boot Disc with .exe file on it (although during creating it said there was no more space for .exe file but seemed to work ok)I can then boot into dos and find .exe file but it says file cannot be executed in DOS.
have tried to replace WindowsXP with ubuntu netbook 10.10 on my Acer Aspire one (model ZG5), I opted for erasing the disk completely to just have ubuntu on the machineit runs perfectly from the USB drive, but will not boot up after a full installation, I just get a black screen with flashing underscore cursorthere are several threads about this problem but I cannot glean a solution, I have used 2 downloads as I thought the first iso might be corrupted, but still cannot get the system to start upwhat is the next step, is it worth persevering or trying an alternative distro?
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
My laptop is an Acer Aspire 5515. BIOS Version is V1.0 (latest) from Acer. PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
I tried to install ubuntu 10.10 NBR on an acer aspire one and the install crashed, it is a known problem but my main problem is that the 250gb SATA is partitioned in two and then i deleted linux swap and the ubuntu 10.10 partition to make free space.
a) how can i resize the windows 7 (dreadful OS) to what size it originally was b) if i install an older version of ubuntu (10.04) will it boot up as if i chose the partition alongside other OS or will i have to install a bootloader (I have never done a specify partitions install) C) is it that acer aspire one's cant load any version of ubuntu (I know a mad idea as ubuntu has many drivers and should work with it.)
I've been running Ubuntu on one of my old notebooks (Acer Aspire 5516) for the past two years. My problem started when I tried to upgrade to 11.04 64 bit. The installation seemed to go fine, but when I restarted to finish, after I would log in all I would see is the background with no menus or anything. I tried doing a fresh install and seeing if that helped, but it didn't. I had to downgrade back to 10.10. Does anyone know if 11.04 works at all on the Acer Aspire 5516 or a similar model? Even at 32 bit?
I have tried and failed to install the lastest netbook version 10.10 on my Acer aspire one 110 netbook, this is the one with a 8gb ssh. It booted fine on a usb drive and I was able to test drive the distro. The installation went all the way through without any problems but when it came to rebooting the netbook just showed a blank screen with a dash in the top left of the screen. There is no sign of the computer looking for the hard drive it just sits there! If I reboot using the usb key I could see that all the files have been installed on the 8gb drive. I have reloaded 10.04 which works just great and during that installation the installer could see that 10.10 was installed. Has anybody else had this problem? I was wondering is there is a problem with GRUB , however it would be nice to install the new version it's so frustrating to have failed.
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
I have a problem with certain web sites, mainly BBC when the page just disappears and it just reverts to my desktop.I tried installing more up to date version of Firefox but it keeps on happening- mainly it seems when BBC site has fancy graphics.
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
my aspire one netbook which uses linux will not start. when i press the power button, it starts booting then will just give me a blank screen. my problem is that i dont know my system user password so can go into setup.
I just purchased an Acer Aspire 5050, and was trying to install Ubuntu on it for my mother. (No, I am not forcing it on her, she actually asked for it.) I burned a CD and put it in the drive, and it said Operating System not found. So I went into the BIOS and told it to boot nothing but the optical drive. Same error. I burned another disk with the same computer, and then another computer. Same error. (Hereafter referred to as "nothing")
So I went and purchased a 4GB flash drive from micro center. Converted my iso to img and DDed from my Mac, then set the BIOS to boot it. The BIOS recognizes the disk, but won't boot from it, giving the same error. So I thought: Fine, I guess I can't get _nix to boot, how about Windows 7? Put the disk in that I used to install on my laptop, genuine Windows 7 disk, nothing. I tried the Vista disk that came with the computer, also nothing.
Any ideas on how to install ANY operating system on this machine? I get absolutely no POST errors. I turned off Quiet Boot and looked, no errors there either. I would be fine installing any _nix based, it doesn't have to be an easy install. I can provide more information as needed, not a problem. I can't think of any more useful information at the moment.
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.
so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...
"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
no internal record or web cam, hence no phone capability either with Skype. Acer will have zero warranty conversations due to OS system change. Previously the machine was crashing mostly while using Open Office