General :: 10.04 Update Fail, Get A BusyBox V1.10.2 Error" Update?
May 30, 2010
I have tried numerous times to install ubuntu 10.04 through a CD and it always fails to boot. I get a message similar to this one: "BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) -"
I have ubuntu 9.10 installed at the moment, and when I update it to 10.04, through update, I still get the same message.
If I were installing from a cd like I was, I could MD5 test the ISO I downloaded and check the CD for defects, but what about when all I'm doing is updating from the update manager?
View 7 Replies
ADVERTISEMENT
Jul 13, 2010
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies
View Related
Jan 3, 2010
Ok. Using Release 12 Constantine Gnome 2.28. Whenever I try to update my computer via de Software Update Manager that pops up every now and then I get an error and the Software Update fails.
The error says its a repository not found, but I am very new at this and have no clue as to where to fix this. Alongside of this, is the fact that since one of the updates is failing, the rest don't install either. So the updates keep on piling.
This is the error shown in the More Details window:
Code:
View 9 Replies
View Related
Apr 29, 2010
i've installed 9.10 today on my dell studio 1558. and with the new release of 10.4 i want to update my ubuntu but it say
Error: No Internet connection (although I've connected threw wifi + cable)
then goes onto say: Cant download relevant package information
View 8 Replies
View Related
Mar 17, 2010
I cant update my fedora its give me this error "Internal system erro has eccurred"
Code:
View 2 Replies
View Related
Sep 4, 2010
I installed all recommended updates as suggested by the update manager, after installing was asked to restart. During this restart I get the error message "udevadmin trigger is not permitted while udev is unconfigured. After this I am left with a BusyBox v1.13.3 [...] (initramfs)_
View 1 Replies
View Related
Oct 13, 2010
Last week I took up the courage to replace my windows 7 completely with Ubuntu 10.04 (Lucid). The Installation went fine and was happy with it.
And then on 10th I upgraded from 10.04 to 10.10 (so called perfect 10), when the laptop restarted it showed me BusyBox v 1.15.3 message on the Boot screen.
View 2 Replies
View Related
Jan 1, 2010
So after a win7 wubi install, I updated through system update. Now after I choose ubuntu in the win bootloader it takes me to a grub screen. How can I boot into linux and remove grub? (This isn't my computer otherwise I would dual boot and let grub take care of it).
View 5 Replies
View Related
Nov 10, 2010
I was assigned to do all the RHEL5 updates. All installed fine including the new kernel except for the updated libX11 and python packages. Does anyone have any suggestions relating to a fix for this?
View 3 Replies
View Related
Jun 4, 2010
I was trying to install subversion on Ubuntu with the command "apt-get install subversion" . It successfully started installing svn , but unfortunately my laptok bettery failed and it didnt completed installation. But I couldnt reinstall again. I am facing with the following error whenever i deal with apt-get.
Quote:
I cant do anything with apt-get now .
View 3 Replies
View Related
Aug 21, 2010
I have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
View 3 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Aug 4, 2010
The system is an old AMD Duron 650MHz that was dug out of the garbage, trying to set it up as a light duty server. I installed ubuntu 10.04 with no errors or troubles during the install, however whenever the system is booted it sits at a cursor for about a minute then goes into busybox giving the error "Gave up waiting on root device." and says that the hard drive does not excist. If I sit at busybox for about another minute and type exit it then boots ubuntu 10.04 with no errors or issues.
View 7 Replies
View Related
Aug 17, 2010
get this error when trying to build busybox on slackware64:Code:Makefile:1288: *** mixed implicit and normal rules. Stop.I've tried googling and there seems to be no mention of this error, if I download the precompiled binary it works fine
View 1 Replies
View Related
Apr 30, 2010
Why use nash instead of busybox in initrd and initramfs? I'm just looking for pros and cons of both really (and any other applications with similar functionality). I'm currently leaning towards busybox being the better option, why redhat and fedora use nash in their initrd.
View 2 Replies
View Related
Jan 25, 2011
As the name says, I'm new to Linux. I've never even seen Linux. Super noob. I have installed Ubuntu 10.04 onto a Dell Dimension 2350 P4 1.8ghz, 1g ram, GForce 4x 128mb video card running XP. I installed from a Live CD and rebooted. The screen says "finishing Ubuntu install" does a countdown and loads into BusyBox instead. This is what I see:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter help for a list of built-in commands.
(initramfs)cannot mount /dev/sda1/tmpmountpoint
If I boot from the CD I get: Unable to find a medium containing a live file system I'm stuck, I don't know many commands so step by step. Simply saying 'load grub' means nothing to me.
View 1 Replies
View Related
Feb 1, 2010
Host - Debian 5.0 32bit
VM - Ubuntu 9.10 32bit
KVM
On running $ sudo apt-get update
Code:
err http://hk.archive.ubuntu.com karmic release.gpg
could not resolve 'hk.archive.ubuntu.com'
......
The feature System --> Shutdown/Restart/etc. are missing
View 3 Replies
View Related
Feb 26, 2010
I have a Linksys WRT54G with the Tomato firmware on it. So the system running on the router is Busybox 1.14., which as far as I know is Linux-based. I want to update the busybox to the newest version, using ipkg which is the only package manager it has installed on it. By the way, I use telnet to access the router. So I use # ipkg install (the url to newest busybox release) but at some point it stops and says:
mkdir: cannot create directory '//opt/usr/': Read-only file system
so what can I do? How can I make the filesystem read-write?
View 1 Replies
View Related
Apr 28, 2011
I am building a floppy linux distro and have compiled a custom kernel, toolchain, uClibc and busybox. It all fits and boots but says "Failed to execute /busybox attempting defaults" /busybox is executable and should have the shared libraries available. I created both a dynamic and static hello world program and nether will boot as init. The root fs mounts without issues. What is the problem? (Sorry, Do not have the log since this is a different box) (May try to get it over serial console)
View 9 Replies
View Related
Apr 9, 2010
I apologize if this is posted elsewhere, but after a few searches I came up blank. My question is how do I redirect apt-get to look under current distro repositories? I upgraded recently to Karmic from Jaunty, yet apt-get is still looking for Jaunty. ie
[Code]...
E: Some index files failed to download, they have been ignored, or old ones used instead.ernie@ubuntu:~$I know this has to be an easy fix, I'm just too new to know what to do about it.
View 2 Replies
View Related
Jul 10, 2011
I amend the grub file at /etc/default/grub as administrator, I then open a terminal and perform 'sudo update-grub', but I receive the following error message:
Quote:
/etc/default/grub: 1: If: not found
What could this mean? How can I update Grub successfully?
View 5 Replies
View Related
Sep 27, 2009
Prior to posting this I entered search arguments, "Busybox," then "initramfs" to attempt to find another user who may have experienced the same thing; if the solution is imbedded in the message threads, I must have missed it. On hand is a Ubuntu Server 8.04.3 installer CD. What works: Installs to a Mac Pro under both Parallels, and then under Fusion both were successful first try.
Install to a newly purchased 2 gig Acer Aspire One seems to have succeeded, but upon launching from Grub, Busybox/initramfs intercepts and halts the launch with an error I don't understand:
Starting up ...
Loading, please wait ...
Check root = bootary cat /proc/cmdline
[code]....
The new Acer-PC Aspire One was partitioned into four 80 gig partitions using the Paragon software to do the partitioning. XP is on the first, and Ubuntu Server on the next 80 gig partition. Install was "successfully" done from a Lite-On external CD/DVD over USB.
During the install I changed the default name from Ubuntu to something else (probably a bad idea), and I naively entered "/" root to answer the mount question (finding nothing to tell me what to do). Ubuntu required a disk driver choice from a long list - finding no reference or guidance as to what to enter, I naively entered IDE Generic, and it took (I guess it "took").
FWIW the Ubuntu installer didn't require me to indentify the mount entry or the disk driver during installs on my Mac (Fusion/Parallels).I did connect the Internet during the install. I did checkoff/install LAMP during the install from CD. Goal: To use Joomla in a mock server environment.
View 3 Replies
View Related
Jun 15, 2009
I just upgraded from Fedora 10 to 11 using yum preupgrade method. After what seems to be a successful upgrade, I get 2 boot errors warning icon at the log-in screen - one for ntpd and the other for httpd, both fail.
When trying to start http by command line the following error line appears:
Starting httpd: httpd: Syntax error on line 196 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared object file: No such file or directory
[FAILED]
In "Services" it shows httpd as being enabled, but not started. When I try to start it, it just gets stuck on refreshing.
View 9 Replies
View Related
May 5, 2011
10.10 -> 11.04 Update hang and fail I used Update manager to update and the screen froze at the end of the "installing updates" phase with 1 minute remaining, with the last message "Installed liblvm2app2.2"
After a power cycle I get the grub boot menu but after that a blank screen and then nothing
The PC is a triple boot with Windows XP and Slackware. I can still boot into Windows.
View 2 Replies
View Related
Jun 2, 2011
I tried to update Linux kernel (2.6.39) but after installation procedure PC won't boot into NEW kernel, I get only BLANK screen, but hopefully older kernel works just fine (2.6.38-9), how to fix it, that I can fluently boot into 2.6.39?
View 4 Replies
View Related
Jan 8, 2011
Howto install busybox with Gnome on a USB memory stick and make it bootable?
[URL]
View 2 Replies
View Related
Sep 24, 2010
I'm trying to run a shell script on a kern board (av1100) that shows some text output on the attached screen. The big problem is that the screen goes to blank in like 2 minutes.I'd just like to have the script showing it's output while the thing is on.Isn't there a command to stop the screen from going to blank?p.s. there is no bash available, just #!/bin/sh
Code:
#!/bin/sh
###########################################################
[code]....
View 2 Replies
View Related
Jun 11, 2010
Last nights updates of: java-1.6.0-openjdk-1.6.0.0-39.b18.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-39.b18.fc13.i686 no longer work with Ameritrade Command Center. I was really happy when OpenJDK got to a point where I didn't have to install Sun's Java, and it has been working great for quite a few months now, but today, when trying to bring up Command Center, it's telling me that there is a missing plugin, then points me to the Sun Java site. This is when using Firefox or Chrome. It may just be the plugin or the way it's positioned, so, hopefully this weekend I'll get time to investigate a little further. If not I'll downgrade to the previous version. <sigh> I really didn't want to install Sun's Java on my F13 boxes.
View 13 Replies
View Related
Mar 2, 2011
i updated and now the bar at the top of the screan does not extend all the way across my 2 screans and most of my icons have failed, ill upload a picture
View 1 Replies
View Related
Mar 11, 2009
I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.
I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).
Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...
View 14 Replies
View Related
