I am trying to configuring name server on Centos 5(the latest version) but when I am going to install the named server rpm package it shows the dependices failed of lib and bind packages..however I installed these both packages so it shows again the dependices failed of these packages. My yum is working fine because I have tried some other rpm like dilaog, samba and many more.
View 11 Replies
I try to install my Fedora 12 machine from my http server.but i fail to install it on the client side machine give me a error like
unable to retrieve.Here is the step what i did.
1)I copy the entire my rpm of F12 DVD to the /var/www/html/rpm
2) and start the http server (my http server is start without any problem).
3)on the client side machine i booted from f12 dvd after askmethod i select url.
4)and enter the ip address of 192.168.10.2(for client ip address),192.168.10.1(gateway),and 192.168.10.1(nameserver)
5)after that i enter the [URL] this is my http.conf file
<VirtualHost 192.168.10.1>
ServerAdmin root@server.homepc.com
DocumentRoot /var/www/html/
DirectoryIndex index.html
ServerName server.homepc.com
</VirtualHost>
Note => i configure the dns server on 192.168.10.1 machine , and this machine is also a my http server.
192.168.10.1 has a domain name of server.homepc.com
192.168.10.2 has a domain name of client.homepc.com
I am not able to install RHEL5 through httpd(apache) server , i checked on the host system , apache server is working fine and i am also able to navigate to my installation dir through browser.
problem:
I want to install RHEl5 from guest OS in Vmware:
1.I inserted cd-rom and change bios setting to cd rom
2."linux askmethod" , then select http protocol.
3. but system never retrive files from installtion dir instead retrive from cd rom used for only booting purpose.
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
I used to run Fedora linux a long time ago but this is my first time back to linux in a while.
In short I am trying to install Ubuntu Server 10.4 LTS on this machine:
Dell XPS Server
Intel core 2 quad q6600
8 GB DDR2 667 MHZ Ram
500 GB WD Blue Sata Hard Drive
The install CD boots fine, asks me if I want to install Ubuntu Server, I select that option, and the only thing that follows is the blinking cursor and a black screen, nothing else happens.
install sshfs in centos 5.5 but i was not able to get the correct package to install.
View 5 Replies View RelatedI am trying to install CentOS on my netbook and I am referring the following documentation: [URL]
However, after completing the steps mentioned in the documentation when I plug in the USB to boot in CentOS it says: Unable to find the kernel load image and then sits at the boot: prompt.
So I just got a new centOS box with PHP 5.1.something but I wanted it on PHP 5.2, initialy running
Code:
yum update php
returned
Code:
php-pecl-memcache-2.2.6-1.el5.x86_64 from installed has depsolving problems
--> Missing Dependency: php-zend-abi = 20050922 is needed by package php-pecl-memcache-2.2.6-1.el5.x86_64 (installed)
[Code].....
I've tried installing mysql-server on Lucid, and I get errors that it cannot set the root password. A screenshot is attached.
I have no idea what to do. I've tried purging configuring and reinstalling. Same problem. I can't find anything in the logs.
I can connect by using ssh with my server. However I am not able to use the following. Which software do I need to install on the server?
ssh X <username>@<IP address>
I completed an install of Ubuntu server 11.04 last night. After the initial reboot I receive a message stating there is no boot disk. Needless to say, this was irritating. I have run Fedora 14 w/Amahi on this computer for several months but, I wanted to try something different. I am running the following:
Intel DG965WH MB
Intel Core 2 6300 @ 1.86Ghz
4gb Ram
3 2T HD's (WDCWD20EARS-00M, ST32000542A5 and, ST2000DL003-9VT1)
Nvidia 9600GT
Creative X-FI
Sony DVD Optical Drive.
I wanted to use server so I can setup an LV during setup, which doesn't appear to be offered with the Desktop version (during setup I mean). So, ANY help would be really awesome. I don't care which version, of the OPSYS, I use as long as it can do the following:
[Code]...
I recently decided to convert my old NAS gox from Gentoo to Unbuntu Server. For reasons that I do not understand I cannot install 10.04 or 11.04 on it. I've downloaded both the i386 and the AMD64 ISO images to the same machine, burned the the image on the same DVDRW drive onto the same CDRW disc but when I try to install on the D945GCLF board, it consistently fails at the same step - Unable to install base system.
The ISO image all indicate a good MD5 sum and I've burned the ISO image at the slowest possible rate. I've even tried moving the image onto a USB drive and installing from it - same error. The D945GCLF has parallel and serial ports disabled; I'm using the SATA drive for the OS and installing from a USB CDROM drive
I'm installing FreePBX for one of the servers at my work. Im having problems and theres error's coming up saying "amportal binary can not be found" has anyone else had an error like this? Because the installation was going through a tunnel before and the router died so I tried it again by having the installation file locallaly on the machine and then the amportal error comes up towards the end of the installation, But I do a locate, and the file is actually there,
View 1 Replies View RelatedI did a port scan on my server from outside my network and saw that port 10080 AMANDA is open.Amanda isn't installed on any of my computers or my server and the port is not forwarded by my modem or router. So why is this port open and how can I close it?
View 6 Replies View RelatedI have working apache/php/mysql on my Gentoo server. But I have to enable some extensions in php (json, exif).
I did: USE="dev-lang/php json exif" emerge dev-lang/php
Working in CentOS. Want to have drag-and-drop SCP access to another system.
Opened up the file manager (nautilus) and went under File -> "Connect to Server". Filed in the information, hit connect. The connection will sit forever and will never properly establish. It creates an icon on my desktop, but noting else.
If I go into terminal, su to root, open nautilus and then repeat the process as a root user, then it works successfully. Connection established after I trust the remote host. File transfer works fine.
what is occurring when I attempt to connect as my normal user?
There seems to be some problem in my dns server.
The configuration is perfectly ok.But what happens sometimes is,
it couldn't resolve some domains sometimes.After restarting the
named,it again resolves the domain.
whats happening on my dns server
I have Squid 2.5 stable3 in a RedHAt machine, the problem i have is that i can't connect to an FTP site, i got the squid screen:
An FTP authentication failure occurred while trying to retrieve the URL: [URL]
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.
I'm able to browse anonymous FTP sites like ftp://ftp.ea.com, but not any with authentication.
i have setup
acl FTP proto allow ftp
http_access allow ftp
but still can't connect. I also can't connect to secure port 443 for an application in th network.
when i connect the machines outside te SQUID i can use the ftp and secure ports.
On the server having live ip address, I have installed vnc server using:
yum install vnc-server
yum groupinstall "X Window System" "GNOME Desktop Environment"
yum install xinetd vnc-ltsp-config
/sbin/chkconfig xinetd on
/sbin/chkconfig vncts on
/sbin/service xinetd restart
On my local machine connected to internet via LAN, I have installed vnc viewer using: yum install vnc When I connect to the vnc server using vncviewer ipaddressofvncserver:1 it shows unable to connect to host. No route to host (113)
Facing this issue where I need to ssh from a solaris server to Linux server.The flow is as below:
-Oracle Webserver on solaris server (oracle user) initiates a cgi script
-The CGI script then executes a shell on the solaris server that tries to ssh to linux server
Have already tried the below:
-Checked the permissions for the .ssh and related folder/files
-authorized keys updated correctly
-tried alternative ssh login from another user which works fine
Issue could be-
-I must try the first login manually, where I'll need to enter password and then the solaris server will get registered in the known_hosts of the linux server
-Cant do this because I donot have the oracle user access.
Please suggest a work-around to the issue that can be done from my end.
Or is it that I must simply ask the DBA to execute an ssh from their ends?
Why am I not able to telnet to a Windows server machine? Is it because the telnet server is not running there? A remote desktop connection works though.
Does a telnet server run by default on a Unix machine?
Client unable to listen to NIS domain server.I have configured an NIS server, which is working fine.I then configured an NIS client to share some like passwd, shadow, etc.By default the client was trying to communicate to the NIS server using the broadcast method..However if I restart the client computer, it fails to communicate or Listen to the domain server. Once I login to the pc, I then check the /etc/yp.conf file and it switched back to the broadcast method.Is there any way that I can make this entry: domain naman.com server station51.naman.com permanent so that even after the reboot it should communicate using the client-server connection rather than the broadcast connection.
View 8 Replies View RelatedI have installed Debian lenny with software RAID0 (i think it makes no sence to my problem but maybe...) I have installed apache2+php+MySQL (everything worked) I have installed proftpd (to enable users to put files over FTP) after this i tried to connect over SSH to my server i have got:
Code:
$ ssh -l shark 192.168.0.254 -v
OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code].....
I thought it is problem with SSH i have tried to connect with another machine over putty, but no success... then i have removed ~/.ssh dir and tried to connect again... i got the same error. Then i connected keybord and monitor to my Linux box, tried to connect there... no success... neither root or my regular user shark. but i should mention my FTP users who have shell: /bin/ftp (symlink to /bin/false) log into the system and then automatically disconnect...
i have tried to boot my linux box to debian safe mode... it asked for a root pass. after i provided correct root pass it didn't fit. I remember once i have made my linux boot to init 1 without asking to provide a pass (it was mandriva Free 2005 or 2006.0) how to do it with a debian machine using grub or any other fixing possibilities?
P.S. i can not how provide server side /var/log/syslog or any other info because i cannot log into my Linux "server"
Unable to run programs as su - (root) from command line. example: kfind or yast2error:cannot connect to X ServerAfter I exit as root, I am able to excute both commands successfully.I will not work as su -. Operating System: SLES 9 (using KDE).
View 2 Replies View RelatedI have to haredisk in my system "sda" and "sdb" in sda there are 2 OS installed which are RHEL5 and windoesXP
Now I tryed to install Ubuntu and it got installed successfully.when I reboot my PC I found that my RedHat grub has got crashed.
I Again booted my system with RHEL5 DVD and entered in that rescue mode and and installed that Redhat grub (grub-install /dev/sda(#pwd /boot)) and when i see my system after getting reboot that Ubuntu grub was missing
This issue as my requirment is that i want my system to detect all that three OS which are installed..
I installed dtc, dtc-postfix-courier and a few other depend software. When I re-started the server, I was unable to login with my usual login information. I am able to go to recovery mode to change the password but I am still unable to login to the system. Essentially, only root is able to access data on the server.
View 14 Replies View RelatedI am able to traceroute but unable to ping a external mail server ? What could be the reason ?
View 3 Replies View Related
