I am not able to get evolution to start up. I have tried removing the .evolution and .gconf/apps/evolution and, uninstalling and re-installing evolution and the most i could get is the initial config screen to setup the mail account. After i do all of that, the window disappears and does not come back. Does anyone know how to start up evolution?
View 3 RepliesI set up a new machine w/ f15 this past weekend. Everything seems to work fine except Evolution.The first time I ran Evolution I restored my Evolution v2.3 (mbox) files that I had backed up from F13. I did this from the setup wizard so I actually never "opened" Evolution. The conversion to maildir appeared to go OK, and I can see the files in /home/oldan/.local/share/evolution/mail/local/cur. Each file (there are 17,000+) can be opened, so the data conversion is intact.
However, I am unable to open the application at all. In the GUI (KDE) I get a spinning icon that goes away in about 30 sec. From a command prompt as a regular user I get:[oldan@Fedora15-001 Documents]$ evolution (evolution:4822): Unique-GDBus-WARNING **: Error while sending message: Timeout was reached
As root I get[root@Fedora15-001 Documents]# evolution No protocol specified Cannot open display: Any one have a clue as to what might be happening?
I have had some problems with Evolution. It sometimes freezes on start-up: I have to force it to quit. If I open "System Monitor", and end the evolution-alarm-notify task, then I can restart evolution successfully. I therefore suspect it is that which is causing trouble. What is it and how do I stop it?
View 9 Replies View RelatedI've been running the Evolution mail system under Fedora-15/KDE for about a month now, and it has some very serious problems. I just noticed that it is available for SUSE, and figured that since KDE is the principal desktop supported by KDE the SUSE version may be fixed. Before I go through the very tedious process of getting the SUSE version to compile on Fedora, I'd like to know whether anyone has seen these problems with the SUSE version of Evolution:It ignores font control from the KDE Settings->Applications Appearance window, both KDE font control and GTK+ font control, also its own internal font control window.
It has trouble sending messages to an SMTP server, sometimes taking a l-o-n-g time, sometimes timing out. This can be temporarily cured by restarting it It crashes when a filter attempts to refile an outgoing message. It often asks if I want to recover messages that have never been lost. It often locks up receiving mail from a remote POP3 server. I can live with these, except for items 1 and 2, since I have workarounds. If you are fairly sure that you have not seen these problems with the SUSE version of Evolution
I had configured the evolution to send/recive email. After it had been configured, it could receive emails. Suddendly it can't fetch email anymore. In the inbox of evolution, there were about 200 emails. There are maybe 5K emails in the server, I guessed. I'm not sure whether it's the problem that there's one email in the server too big, so the evolution can not fetch it. The error of evolution is: error while fetching email. Evolution version: Evolution 2.28.0. OS version: Linux xxx2.6.32.9-70.fc12.i686.PAE #1 SMP Wed Mar 3 04:57:21 UTC 2010 i686 i686 i386 GNU/Linux I'm sure my network is fine, I use pop3 to receive email.
nslookup result:
$ nslookup pop3.163.com
Server:221.6.96.178
Address:221.6.96.178#53
Non-authoritative answer:
pop3.163.comcanonical name = pop.163.com.
pop.163.comcanonical name = pop3.163.idns.yeah.net.
Name:pop3.163.idns.yeah.net
Address: 123.125.50.29
I have fedora 10 and vista in my system. however,all was working fine ,but suddenly today when i tried to boot into fedora , i found that the avahi demon was not starting , and when the systemn booted , a message was shown that thre wasn't enough memeory space , and a blacjk scereen was shown , then i booted into vista and tried t acess the linux partiotion by Explore 2f software... At first it showed not enough memory space , but on rescanning the partition,it is showing the /boot folder.So how do i delete some data in fedora ?
View 1 Replies View RelatedI can start my webservers sometimes, but not at everytime. After restarting the system, again I can start my web server as usual. Whether it is a problem of fedora9 or web servers?
View 1 Replies View RelatedI am trying to start FTp service both from Terminal and Cpanel interface but unable to start. it says cannot start ftpd service. contact administartor
It's Redhat Linux can anybody help me to fix this issue?
I just installed Ubuntu 10.04 fresh and was putting my preferences back in for Firefox and MythTV and such when I noticed Evolution wouldn't start. I would click on it and the cursor would change for about 5 seconds and then nothing. I tried uninstalling Evolution (big mistake), but after I got back into the desktop, Evolution still wouldn't start. I can't seem to find anything around here that deals with this. Where should I start to debug this?
View 3 Replies View RelatedI have a dell studio 1555 laptop , i m facing the very strange problem with my bluetooth , my bluetooth is not working on my F11 , means to say i cant be enable the bluetooth on my box , i thing its a driver issue
View 2 Replies View RelatedI installed ardour on my F11 box, and both jack1 (0.xx, in /usr/bin) and jack2( 1.9.5, in /usr/local/bin/). Now when I try to start ardour, it balks about being unable to start jack. On the ardour settings page, I tried changing the JACK server path field from /usr/local/bin to /usr/bin, to no avail.
On the cmdline, here's what I get when I run, manually jack1 and jack2:
JACK1:
[root@localhost yati]# /usr/bin/jackd
jackd 0.118.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with absolutely No Warranty
This is free software, and you are welcome to redistribute it
under certain conditions; see the file copying for details .....
That prompts me to think that JACK1 is fine... but still ardour won't start up.
i am installing oracle database 10g2 in my fedora12 with the help of this link ORACLE-BASE - Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora 7 (F7)Now i am start my Database using sqlplus:[oraclelocalhost ~]$ sqlplusSQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep 16 10:53:47 2010Copyright (c) 1982, 2005, Oracle. All rights reserved.Enter user-name: /as sysdbaConnected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
[code]...
Suse 11.3/Gnome 2.30.0
Evolution 2.30.1.2
I cannot get the monthly view to start the week on Sunday. The settings seem right but they don't stick. Restarting Evolution always defaults to a week start on Monday even though the defaults display Sunday. I've viewed the default settings the following two ways:
Within Evolution... Edit > Preferences > Calendar and Tasks > week starts on "Sunday"
GNOME Configuration editor.../apps/evolution/calendar/display/week_start_day = 0 (Sunday)
Haldaemon, pscd not starting... cannot force to start. Do not start when running service pscd start. Just failed. Boot message is below:
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
[code]...
after executing the commands
1. ./startup.sh
2. tail -f ../logs/catalina.out
the following error comes on the terminal
.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(Abs tractAutowireCapableBeanFactory.java:1245)
[code]....
when i start evolution from terminal i get debug
-(evolution:3869): DEBUG: mailto URL command: evolution %s
-(evolution:3869): DEBUG: mailto URL program: evolution
I have a Toshiba laptop with dual boot W7 & Ubuntu 11.4. Evolution Mail Program was installed and running perfect. My mistake was to try to import my e-mail contacts address book backup for evolution,ever since I cannot start it as it shows a notification that it is still migrating my files. I have uninstall and install the same program but unfortunately the issue remains and I can no more start my evolution email application.
View 5 Replies View RelatedWhen I start up Evolution Mail client by any means (toolbar, applet or command-line) it starts up, but then the window turns grey immediately and freezes. I am forced to close it with the "killall" command.
I love the small mailbox in my toolbar (GNOME) and I don't want to lose it. I am concerned that removing Evolution by the Ubuntu Software Center will eliminate this wonderful tool. Otherwise I would re-install it.
I have made no changes to the mail client in months. My wife who uses Thunderbird on Windows 7 is still operating normally, so I do not believe anything changed on the mail server.
I remember a friend of mine was able to get my computer to boot under CUI, and the command 'start x' started the GUI. with booting up my computer through CUI.
View 3 Replies View RelatedCan anyone help me with how to create an init.d script that will startup a vm machine in virtualbox at boot? I found this script:[URL]..But it is for ubuntu. I am running fedora 12 x386 and using it as an Amahi server. Very cool, but it would be extra cool if I had a virtual windows machine startup when I booted up this server. Then I could just rdp into it when I needed something in windows.
View 3 Replies View RelatedI'm fighting to make wifi work on an HP dv6-3194.
The symptom is that I'm always asked to enter the WPA passwd.
1-This is a fresh FC15 install:
Linux localhost.localdomain 2.6.38.6-26.rc1.fc15.i686.PAE #1 SMP Mon May 9 20:36:50 UTC 2011 i686 i686 i386 GNU/Linux
2- Network interfaces are detected:
3- pci card is RT3090
4- lsusb returns:
5- lsmod returns:
6- iwlist wlan0 scanning detects wifi networks without problems.
7- relevant dmesg entries:
8- wpa_supplicant.log
I've tried many suggestions from this forum about RT3090 or RT2800, but none worked :-(none seemed to be close to my problem:
Most of them relates to interface not seen, wifi networks not detected, system freeze.
Just did a fresh install of 10.04, everything working great, and I was pretty excited about the integration with gwibber, evolution, and empathy. I was fiddling around, getting things the way I wanted them (startup programs and such), and upon a test restart, noticed that unlike the first couple of times I had restarted with 10.04, the Evolution icon no longer came up in the tray, and my "Me" menu was useless - didn't have me signed in to Gwibber or Empathy, didn't give the option to do so.
Yes, I can still run these programs no problem, and I could probably get it such that they ran at the start... but what I would like is for them to run minimized, in the tray, like they did the first time I booted up 10.04. Again, I trust this is a mere couple of lines in the command prompt, I just don't know what they are.
I am relatively new to Fedora 15, but used 13 for a while with no issues. Yesterday a windows user put a flash drive into my computer for me to copy something on to. (This may be conincidental.) I then put the computer into suspend or hibernate or whatever and now it won't start up. At all. And I'm stuck as 'everything' I need is on that computer.
View 1 Replies View RelatedUnable to start tftpd service after starting xinetd
View 9 Replies View RelatedDon't know what is going on here, but Evolution won't start. I've tried reinstalling. When I click the icon to open it, the little loading cursor displays for a few seconds then it disappears and nothing else happens.
View 9 Replies View RelatedI am unable to configure evolution,i am using ubuntu 10.04.
View 3 Replies View RelatedI get the following message when I try to send an e-mail with the option "PGP Sign" in Evolution:
Code: Select allCould not create message.
Because "gpg: skipped "67449612": No secret key gpg: signing failed: No secret key", you may need to select different mail options.
I have "Preferences > Mail Accounts > Edit > Security > OpenPGP key ID " set as 67449612, which is my subkey for signing, and this configuration has worked properly until two days ago when I upgraded a bunch of packages with evolution and gnupg among them. Since I am not sure this is really a bug or what package would it belongs to I am asking here first before submitting any bug.
I believe signing works and the secret subkey is "find-able" because I am actually able to do the following without any errors, and this is why I don't understand the error given by Evolution:
Code: Select all$ gpg --output random.sig --detach-sig random.txt
You need a passphrase to unlock the secret key for
user: "Rock Storm <rockstorm@gmx.com>"
4096-bit RSA key, ID 67449612, created 2016-02-21 (main key ID C96832FD)
$ gpg --verify random.sig random.txt
gpg: Signature made Sun 28 Feb 2016 11:47:47 AM CET using RSA key ID 67449612
gpg: Good signature from "Rock Storm <rockstorm@gmx.com>"
My gpg's keys configuration, notice that the "defaut-key" option in gpg.conf is commented out. This configuration worked for sending signed e-mails at least once before the upgrade.
Code: Select all$ gpg --list-keys rock
pub 4096R/C96832FD 2015-12-13
uid Rock Storm <rockstorm@gmx.com>
sub 4096R/7C2F5752 2015-12-13 [expires: 2018-03-12]
sub 4096R/67449612 2016-02-21 [expires: 2018-03-12]
[Code] ....
From the bunch of packages upgraded the ones I believe to be related to Evolution were the following:
Code: Select allgnupg:amd64 (1.4.20-3, 1.4.20-4)
evolution-data-server-common:amd64 (3.18.3-1, 3.18.5-1)
evolution-common:amd64 (3.18.3-1, 3.18.5-1)
evolution-data-server:amd64 (3.18.3-1, 3.18.5-1)
evolution-plugins:amd64 (3.18.3-1, 3.18.5-1)
libevolution:amd64 (3.18.3-1, 3.18.5-1)
evolution:amd64 (3.18.3-1, 3.18.5-1)
I searched current known bugs in Evolution and I could not find anyone related to this.
I tried downgrading it to the previous version but I wasn't able to downgrade every package related to Evolution. Curiously the previous version for some of them seems no longer available:
Code: Select all# apt-get -qq update
# apt-get -s install evolution-data-server=3.18.3-1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Version '3.18.3-1' for 'evolution-data-server' was not found
# apt-cache show evolution-data-server | grep -i version
Version: 3.18.5-1
Version: 3.12.9~git20141128.5242b0-2+deb8u2
Anyway, downgrading only the following four packages did not resolve the issue, and I am still getting the same message in Evolution:
Code: Select allDowngrade: evolution-common:amd64 (3.18.5-1, 3.18.3-1), evolution-plugins:amd64 (3.18.5-1, 3.18.3-1), evolution:amd64 (3.18.5-1, 3.18.3-1) libevolution:amd64 (3.18.5-1, 3.18.3-1)
Current package's state:
[Code] ....
I can't seem to track down. In Evolution, I am unable to receive mail. I tried every configuration method I know and still no success. I'm even tried using a hotmail and verizon account settings with no luck.
View 1 Replies View RelatedI have configured Evolution to use my Gmail account. I am able to read my Gmail, but I have not been able to send email. I have found instructions to do this from several sources, which include the Gmail website and Ubuntu help at HTML Code: [URL]. The instructions from all sources have been consistent:
Instructions for Sending(smtp) Mail from Gmail:
1. Server: smtp.gmail.com
Note: Some ISPs block port 25, if you are having a problem sending mail, substitute smtp.gmail.com:587 for the server information above.
2. Server requires authentication: Checked
3. Security: TLS encryption
4. Authentication: Plain or Login
5. Username: johndoe@gmail.com
I have also tried using port 587 and 465 as alternates. When I try to send an email, there appears to be two stages: it successfully completes the first stage that refers to POP, but gets stuck on the second stage that refers to SMTP.
I have Ubuntu 10.04 (I think) using Evolution 2.28.3. When new messages come into the inbox, I get a message "Unable to retrieve message" in the lower screenI can work around it by clicking on the first folder under Inbox and then back to Inbox. When I click to the subfolder I have a message at the bottom that says "Error while Storing folder 'Inbox'".It would be nice if it simply worked the first time. It feels like it thinks there are two or more folders that might be "Inbox".
View 6 Replies View Related