Fedora :: Sound Breakup In 12 - WARNING: Connection Failed Reconnecting
Apr 2, 2010
I have serious sound breakup with fedora 12. When I try I get: gnome-volume-control: WARNING **: Connection failed, reconnecting over and over. I know there is a price to be paid in terms of time and effort to run Linux. But I don't really want to have to fiddle with my sound system each time I upgrade. Every time I get my hopes up that Linux is easy enough to attract wide appeal, something comes along to show me I'm wrong. Most people don't want to live with the hassle. I will continue whether I get an answer or not. I will figure this out one way or another. But if more people were attracted to use Linux it would be easier for all of us.
View 4 Replies
ADVERTISEMENT
Sep 26, 2010
I am running F13 on my Desktop (with a Ralink RT2870 wireless card) and also on my Laptop (Acer Aspire 5738Z) and am connecting to the internet via a NetGear router. On my Laptop I can connect to the internet fine with no problems. However on my Desktop when I turn my computer on it connects to the internet fine, and works, however after some time (maybe 5-10 minutes) it disconnects and the box asking for the password reappears, then I click connect but no joy.
The connection box just keeps reappearing and it won't connect again until I restart the computer (although sometimes it takes more than 1 restart!). This is not a signal issue, as my Desktop also has a Windows partition and that connects to the internet fine and does not drop off. I have installed the RT2870 driver through rpmfusion, which didn't fix the problem, although uninstalling the driver didn't stop the card from working.
View 1 Replies
View Related
Mar 9, 2010
I have a Dell Inspiron 6000 laptop running Fedora 12. Recently my wireless connection has begun dropping every few hours and not reconnecting. After trying for about 30-45 seconds, the WPA password prompt comes up but still doesn't connect.
Fedora release 12 (Constantine)
Kernel Linux 2.6.32.9-67.fc12.i686
GNOME 2.28.2
Memory: 2.0 GB
Processor: Intel Pentium R 1.60 GHz
View 14 Replies
View Related
Jul 6, 2010
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies
View Related
Jan 10, 2011
I've just loaded the new Hamachi2 Linux beta with Haguichi for a GUI. Everything installed & connects OK, but the connection at the hub is dropping & reconnecting every minute or so. I tried adding a line to the sshd_config file to keep it alaive but it didn't make a difference.
View 3 Replies
View Related
Aug 13, 2010
I've been using network-manager-pptp to create a PPTP VPN connection in my Ubuntu virtual machine for a while now, but I have constant problems with random disconnects. I don't know what the cause of the problem is, but I suspect that network-manager-pptp is not the most well-written piece of software around...
Is there another way of instantiating PPTP connections in a more robust manner? The same PPTP server works reasonably OK with Windows 7 (some disconnects, fewer than in Ubuntu, and Windows has an auto-reconnect feature).
I read some guides on using the pptp command, but they all seemed pretty low-level, messing around with ppp. I never found the time to figure out how it all was supposed to fit together. Has anyone accomplished what I'm trying and is willing to share the knowledge?
EDIT: Tried kvpnc, and it seems the stability is more or less the same as network-manager-pptp. The error message is "Modem hangup".
To clarify, I understand that the connection can go down, but I want to be able to reconnect automatically when disconnected.
View 1 Replies
View Related
Jun 15, 2009
Have you guys had this weird nautilus error? When I su to root and run "nautilus" in terminal, errors popped out:
Code: (nautilus:3979): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported(nautilus:3979): Eel-WARNING **: GConf error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
[Code]...
View 4 Replies
View Related
Feb 27, 2010
this started to happen recently after a reboot due to updates. The screen displays many, meaning more than 12 of: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/ which is then followed by: Boot has failed, sleeping forever.
I deleted /etc/modprobe.conf, so that is not the problem. The normal boot process will display the modprobe warning twice and all is well. If the warning is displayed more than twice, the boot will fail and I have to try again.
View 1 Replies
View Related
Feb 16, 2011
On my linux machine, I've enforced a password expiry policy every 45 days. So, today when I tried to ssh to the host, I get the typical "WARNING: Your password has expired". Fine, no big deal. But when I enter my new password and confirm, instead of giving me a login prompt, it tells me passwd all auth tokens updated successfully, then next line, "Connection to <host> closed". I can re-ssh back into that host and all is well from here, but it's a nuisance having to go through the extra step. Is this something in the /etc/ssh/sshd_config somewhere or perhaps a PAM config issue?
View 2 Replies
View Related
Jun 26, 2010
Let me show you the Details:
[code]...
So that means the User Test can connect from any host without password and with the named privileges, but he has no right to grant any privileges. CONSOLE:
[code]...
View 1 Replies
View Related
Jan 22, 2011
I need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies
View Related
May 18, 2011
I am not sure why sometime ssh failed to connect from my old Suse at home (Linux POMDESKTOP 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux) to my Fedora core 14 at work. I used the command
"ssh -X -l login_name IP_of_fedora"
Sometime it connected very fast but most of the time error with 'connection time out'. Also ping remote desktop often failed. How I can get reliable connection every time. Both desktops has been rebooted several times and both have internet access.
View 5 Replies
View Related
Dec 12, 2010
I've been trying since yesterday to install autoten per instructions below [URL]. However it has failed each time I have tried. Below is the terminal response.
Code:
[colyn@Fedora ~]$ su
Password:
[root@Fedora colyn]# rpm -Uvh [URL]
Retrieving [URL]
curl: (6) Could not resolve host: dnmouse.org; Connection timed out
error: skipping [URL] - transfer failed
[root@Fedora colyn]#
I am doing a copy/paste so I am not mis-typing the information. It says that the connection has timed out but I get the error message within 5 seconds of hitting enter.
View 8 Replies
View Related
Mar 13, 2010
If you start gedit from the command line, then you can see this assertion error:
[bart@vectra ~]$ gedit &
(gedit:17187): GLib-CRITICAL **: g_string_append: assertion `val != NULL' failed
sys:1: Warning: g_string_append: assertion `val != NULL' failed
View 2 Replies
View Related
Jan 30, 2011
I recently installed Fodora 14 on a PC with Asus mainboard.
CPU is AMD LE-1100.
The sound card is Realtek ALC662-GR Azalia High Definition Audio
Unfortunately after installation, there is no sound.
In fedora, System->Preferences->Sound window, Hardware tab is empty.
I tried to install two versions of sound card driver.
One came from the CD of the mainboard called realtek-linux-audiopack-4.06x
First I tried to run the "install", it went through to the final GUI stage searching for the sound card but failed to find.
Then I tried to do a manual install following the readme file.
Basically, unpack->configure->make
but make failed with the following error message
make[1]: Entering directory '/home/user/00Sound/realtek-linux-audiopack-4.06x/alsa-driver-1.0.14rc3-4.06x/acore' .....
/lib/modules/2.6.35.6-45.fc14.i686/build/include/linux/types.h:4:23: fatal error: asm/types.h: No such file or directory
compilation terminated.
make[1]: *** [memalloc.o] Error 1
make[1]: Leaving directory '/home/user/00Sound/realtek-linux-audiopack-4.06x/alsa-driver-1.0.14rc3-4.06x/acore'
make: *** [compile] Error 1
Later I tried to download another version of the driver from Realtek website
realtek-linux-audiopack-5.15
make also failed but with a different error:
make -C /lib/modules/2.6.35.6-45.fc14.i686/source SUBDIRS=/home/user/00Sound/realtek-linux-audiopack-5.15/alsa-driver-1.0.23 CPP="gcc -E" CC="gcc" modules .....
make: *** [compile] Error 2
View 1 Replies
View Related
Nov 11, 2009
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
View 2 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
May 9, 2011
i need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies
View Related
Feb 6, 2010
I've been using synergy on Ubuntu 9.04 and windows xp.Synergy 1.3.1 on both machines.My problem is that the server keeps cutting out. It seems to happen a lot when I watch flash videos on the server machine (ubuntu). This is what the server side looks like:
Code:
NOTE: synergys.cpp,500: started server
INFO: CServer.cpp,1141: screen "server" shape changed
NOTE: CClientListener.cpp,127: accepted client connection
[code]....
I dont think I usually get disconnected when doing other tasks. Mostly only when watching flash videos. Sometimes it doesnt automatically reconnect, and I have to kill synergys and restart it.
View 1 Replies
View Related
Feb 26, 2010
I am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10
I have KDBG version 2.1.1
I have GDB version 7.0-0ubuntu1
I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
View 9 Replies
View Related
Mar 30, 2010
Currently running 10.04. Just did some updates and when it finished rebooting it just doesn't work right. Whenever I click on my user name to enter my password it freezes for 3-5 seconds then the screen reloads. If I do Ctrl+Alt+F7 I get this error(the title of the thread). I have no earthly idea what this means but everything was working great until I did my updates just a couple hours ago. on??
View 9 Replies
View Related
Aug 8, 2010
Glib-Warning **:getpwuid_r(): failed due to unknow user id (0)
when you restart the following message appears : [URL]
View 1 Replies
View Related
Aug 13, 2009
I am trying to setup multipath with failover policy on openSuSE 11. I have two qla2xxx HBA's installed and they appear to be working. Here is the output of "multipath -l" command
[Code]....
While testing, I pulled one of the two connection to SAN, and the connection failed over to second HBA connection to SAN. When I plug the cable back in, it does not fall back to original connection... It stays in failed state. Also, I noticed that failed disk (sdd disk) comes back as (sdg disk), which is probably why connection does not fall back to original HBA. But, when I run "/sbin/service multipathd restart" sdg disk shows as as enabled in multipath -l...
View 9 Replies
View Related
Jul 4, 2010
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
View 9 Replies
View Related
May 21, 2011
I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .
View 1 Replies
View Related
Apr 28, 2010
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies
View Related
Jun 5, 2010
I ran Movie Player to play .mov file, but it generate the following error message:
pa_stream_writable_size() failed: Connection terminated
The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.
View 5 Replies
View Related
Aug 8, 2010
I recently decided that I want to install mplayer on fedora 13. Problem is, everytime I try, a new problem arises. I've tried add/remove software, and it said "package download failed, check internet connection" which doesn't make sense because I'm connected to the internet and my connection is fine. So, then I tried yum install mplayer, that gave me an error.
View 5 Replies
View Related
Nov 24, 2010
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
View 2 Replies
View Related
Feb 19, 2013
My system has stopped to boot at all...
Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
[Code] ....
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
View 14 Replies
View Related
