Ubuntu :: GLib-WARNING **: Getpwuid_r(): Failed Due To Unknown User Id (0)?
Mar 30, 2010
Currently running 10.04. Just did some updates and when it finished rebooting it just doesn't work right. Whenever I click on my user name to enter my password it freezes for 3-5 seconds then the screen reloads. If I do Ctrl+Alt+F7 I get this error(the title of the thread). I have no earthly idea what this means but everything was working great until I did my updates just a couple hours ago. on??
View 9 Replies
ADVERTISEMENT
Apr 14, 2011
"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
View 1 Replies
View Related
Jul 20, 2011
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
View 3 Replies
View Related
Nov 6, 2010
Installing 10.10 from disk, at some point during installation an error occurs and this appears:
(process:426): GLib-WARNING** getpwuid_r(): failed do to unknown userid (0)
View 6 Replies
View Related
Aug 8, 2010
Glib-Warning **:getpwuid_r(): failed due to unknow user id (0)
when you restart the following message appears : [URL]
View 1 Replies
View Related
Jul 6, 2010
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies
View Related
May 9, 2010
I'm getting strange error after the splash screen in lucid
(process:290):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
(process:315):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
after this error the screen just hangs.
View 4 Replies
View Related
Feb 4, 2010
I'm running an up-to-date Lucid Lynx, full encryption with LUKS on my Eee 1005HA. Since yesterday, after booting, the only "X" is can see is the mouse cursor above a console-like text, saying:
Code:
(process_290) GLib-WARNING **: getpwuid_(): failed due to unknown user id (0)
init: ureadahead main process (410) terminated with status 5
fsck [clean, blah bla, check deferred, on battery]
[code]....
So, I googled for the getpwuid_r thing. I found a blog saying to install nscd (did so) and run it. But: To my inconvenience, after every booting, I have to switch to console 1, log in, run "sudo /etc/init.d/nscd restart" and then "sudo restart gdm".
View 8 Replies
View Related
May 5, 2010
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
View 2 Replies
View Related
Jun 15, 2011
Quote:
(gimp:4216): GLib-WARNING **: /build/buildd/glib2.0-2.28.6/./glib/goption.c:2132: ignoring no-arg, optional-arg or filename flags ( on option of type 0
segmentation fault
gimp stopped working on kubuntu after installing updates, any fix?
View 9 Replies
View Related
Mar 10, 2010
I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
View 1 Replies
View Related
Aug 3, 2010
Whenever I try to install Xubuntu onto my really old computer (not this one), it goes to a screen that shows nothing except the Xubuntu logo and the name. After a bit, my monitor falls asleep, and I am unable to wake it back up.If I press enter while at this screen, it brings up the error message in the title. The same thing happens with all the options I try to press.
View 1 Replies
View Related
May 24, 2011
i have ubuntu 10.10 but now i have problem to access it so i boot from my live CD this what i get in checkcdfordefects.png when i select Try Ubuntu without any change to your computer that i get logo of ubuntu and take long time to load and not see desktop when press esc this error that i get GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
remark
in bootf4.png
F4.mode
i don't have option safe Graphics Modes i need to acess Try Ubuntu but i don't know what problem?
View 2 Replies
View Related
Jun 1, 2010
I recently installed Kubuntu 10.04 Lucid Lynx Desktop 64-bit edition. The install worked and I was able to restart the machine no problems. Last week (5/27/10) I shut down my machine and since then I cannot boot. I assume it's because of new software maybe a new kernel; I did an "apt-get update; apt-get upgrade" on May 28th or 27th. Upon booting if I hit Esc right away I see:
(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
[About 5 minutes passes then this next line prints]
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) [this is some kind of shell...who can't see my harddrive]
View 4 Replies
View Related
Mar 31, 2011
As root, type "zypper update" and get several lines of the following error:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
View 5 Replies
View Related
Dec 29, 2010
This is my slackware 13.1 new installation `.xsession-errors'.
Code:
<stdin>:1:3: error: invalid preprocessing directive #Those
<stdin>:2:3: error: invalid preprocessing directive #or
<stdin>:3:3: error: invalid preprocessing directive #Xft
[code].....
(polkit-gnome-authentication-agent-1:1742): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:1742): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
View 1 Replies
View Related
Jul 26, 2010
My recent issue is that when i start firefox 3.6.7 OS 9.10 is that the terminal will pop up and have this error: (firefox-bin:2690): GLib-WARNING **: g_set_prgname() called multiple times. I can only have firefox running when the terminal is running.If I close the terminal firefox will close as well
View 2 Replies
View Related
Dec 21, 2009
Read an article on Lifehacker about the new Thunderbird 3; decided to install it. I installed just Thunderbird itself first,
Code:
sudo yum -y install thunderbird
but when I try to run it I get this error:
Code:
(thunderbird-bin:17467): GLib-WARNING **: g_set_prgname() called multiple times I've since updated completely (which changed nothing, since I updated right before I installed Thunderbird) and installed thunderbird-lightning and thunderbird-enigmail, as they are both extensions I used in the past, to see if they would pull in any odd dependencies to solve the problem.
Code:
Installed Packages
thunderbird.x86_64 3.0-4.fc12 @updates
thunderbird-enigmail.x86_64 1.0.0-1.fc12 @rpmfusion-free-updates
thunderbird-lightning.x86_64 1.0-0.16.20090916hg.fc12 @updates
View 4 Replies
View Related
Feb 9, 2010
I have set up a debian 5 server with ISPConfig and PostFix using Perfect Server toturial [url].
Now i have huge problem i'm getting eather "No such user here" message from SMTP server hosted at hosting provider or Unknow User: name from my ISP's SMTP server (free mails they provide)...
Mail LOG:
Code:
View 1 Replies
View Related
Feb 25, 2010
I'm struggling to get my wireless connection working. During an install of the compat-wireless-kmp-desktop driver a warning occurs:
WARNING: /lib/modules/2.6.31.12-0.1-desktopp/kernel/drivers/net/wireless/wl12xx/wl12xx.ko needs unknown symbol_ieee80211_rx
and
Symbolieee80211_beacon_get
What can I do next to get this to work? Running Opensuse 11.2 on Asus 1005PE.
View 5 Replies
View Related
Feb 6, 2010
I've been using synergy on Ubuntu 9.04 and windows xp.Synergy 1.3.1 on both machines.My problem is that the server keeps cutting out. It seems to happen a lot when I watch flash videos on the server machine (ubuntu). This is what the server side looks like:
Code:
NOTE: synergys.cpp,500: started server
INFO: CServer.cpp,1141: screen "server" shape changed
NOTE: CClientListener.cpp,127: accepted client connection
[code]....
I dont think I usually get disconnected when doing other tasks. Mostly only when watching flash videos. Sometimes it doesnt automatically reconnect, and I have to kill synergys and restart it.
View 1 Replies
View Related
Feb 26, 2010
I am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10
I have KDBG version 2.1.1
I have GDB version 7.0-0ubuntu1
I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
View 9 Replies
View Related
Mar 13, 2010
If you start gedit from the command line, then you can see this assertion error:
[bart@vectra ~]$ gedit &
(gedit:17187): GLib-CRITICAL **: g_string_append: assertion `val != NULL' failed
sys:1: Warning: g_string_append: assertion `val != NULL' failed
View 2 Replies
View Related
Apr 23, 2011
i have tried going through this old post but its still not working ... tried googling but i do not seem to find any conclusive solution for this. [URL]i am getting this error during boot time:
Apr 23 15:43:57 ftp kernel: hda: status timeout: status=0xd0 { Busy }
Apr 23 15:43:57 ftp kernel: ide: failed opcode was: unknown
Apr 23 15:43:57 ftp kernel: hda: no DRQ after issuing MULTWRITE_EXT
Apr 23 15:43:57 ftp kernel: ide0: reset: success
there is no immediate effect due to this but after sometime the HDD goes in read-only mode. have tried changing bios setting from IDE to AHCI, did a disk check using hiren boot disk which did not give any errors.even now the error still persists. Linux 2.6.18-164.el5PAE #1 SMP Thu Sep 3 04:10:44 EDT 2009 i686 i686 i386 GNU/Linux CentOS release 5.4 (Final) i know i should probably upgrade my kernel but i see people with latest kernel also facing the same issue (mostly with samsung hdd but mine is seagate)
hdparm -I /dev/hda ------------
/dev/hda:
ATA device, with non-removable media
Model Number: ST380215AS
Serial Number: 6QZ6ENV1
[code]...
View 13 Replies
View Related
Apr 22, 2010
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
View 1 Replies
View Related
Mar 12, 2011
I started up my computer and suddenly, I saw that there was a new user account. I didn't create it and no one else uses my computer (let alone has access to user account creations). It was called dtc. It didn't seem to have any privileges and the only file in its home folder was called Examples. Should I worry that I might have some kind of malware? I deleted the user and the folder (and it came back after a while). It's main group is dtcgrp. The User ID is 1004.
View 2 Replies
View Related
May 23, 2011
i have an admin-account and an user-account on a computer. It's automatically log in to the user-account, but I have forgott the passwordt. I want to change it, but to how change it? I need the precent. How do i do? I have the admin password.
View 2 Replies
View Related
Apr 2, 2010
I have serious sound breakup with fedora 12. When I try I get: gnome-volume-control: WARNING **: Connection failed, reconnecting over and over. I know there is a price to be paid in terms of time and effort to run Linux. But I don't really want to have to fiddle with my sound system each time I upgrade. Every time I get my hopes up that Linux is easy enough to attract wide appeal, something comes along to show me I'm wrong. Most people don't want to live with the hassle. I will continue whether I get an answer or not. I will figure this out one way or another. But if more people were attracted to use Linux it would be easier for all of us.
View 4 Replies
View Related
Dec 10, 2010
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
View 2 Replies
View Related
Apr 6, 2010
I have download file from this site and have done these steps [URL].
tar -xvf ntfsprogs-2.0.0.tar.gz
chown root.root -R ntfsprogs-2.0.0
cd ntfsprogs-2.0.0
./configure
make && make install
Still I have failed to mount ntfs partition with this command..
mount -t ntfs /dev/hda1 /mnt
or
ntfs-3g /dev/hda1 /mnt
The error is .................
mount: unknown filesystem type 'ntfs'
I am using RHEL5.4 and kernel is 2.6.18-164.el5
View 3 Replies
View Related
