I'm looking for a simple to use relational database with a graphical front-end. What are the options on Fedora?
For those that know Filemaker, I'm looking for something like that and I'd llike not to have to build one in Qt.
I'm looking for a simple to use relational database with a graphical front-end. What are the options on Ubuntu?
For those that know Filemaker, I'm looking for something like that and I'd like not to have to build one in Qt.
I'm not a database guru, so be patient with me: Is there some kind of "wrapper" software you can put around an SQL database (MySQL perhaps) that allows you to internally configure database rules on a higher level than the database itself can actually implement? (E.g., "rows in table A can be deleted, but only if there are no related rows in table B and only if column x for the row in table A is in state y.")The idea would be to keep from having to trust this kind of logic to the client programs, while also avoiding the need to write a full fledged server daemon just for your application. The clients submit their SQL insert requests to the wrapper daemon, and the daemon passes them on to the database if they pass a rules table defined for that particular database.
View 3 Replies View RelatedI have never worked with databases before, and would like to create one to be a "workout generator." i.e. have a name of workout, list of equipment, list of exercises, and instructions. Then be able to search by any of the above parameters (for example dumbells and pullups) to get a list of options. I assume a relational database is my best option, but my brief looks at SQL etc they seem quite complicated. A GUI frontend and good documentation are highly desired. GTK is also preferred.
View 6 Replies View RelatedI'm trying to switch from debian to fedora (13) and I'm stuck at getting yum to remove leave dependencies.
So far I've installed "yum-plugin-remove-with-leaves" and I'm able to remove leave dependencies if I invoke yum with the "--remove-leaves" argument from command line.
But this doesn't work with graphical front ends and I want to remove unused leave dependencies every time if I remove a package not just if I remember to invoke yum with the "--remove-leaves" argument.
Later on I discovered an option in "/etc/yum/pluginconf.d/remove-with-leaves.conf" named "remove_always = 1" and uncommented it. But yum doesn't seem to care. I still need to add the "--remove-leaves" argument otherwise yum isn't going to remove the leave dependencies.
How to configure yum to handle dependencies the way I used to know from apt under debian? Install a package with a graphical front end and dependencies get pulled in as needed. Uninstall a package later on and dependencies installed in the first place are removed as well if not needed by anything installed in between.
Is there a graphical front end for xrandr that also allows you to save your setup so that it automatically sets up the X configuration at boot time thereby simplifying this process. For example, at the moment if i want to use an external monitor on my laptop i have to manually set it up after booting as it defaults to the laptop resolution which is not a big deal but would still be nice to have this happen automatically. I tried putting a script into rc.local to do this but didnt work.I have tried programs such as lxrandr, grandr, arandr which are all good but dont allow you to save your choices so that they are automatically applied at the next boot of the X system.
View 1 Replies View RelatedDoes anyone have or know where I can find a front end application that will inventory personal contacts or equipment such as model, serial #, location, etc etc etc? Looking for a PHP or front end proprietary application that will let me input data based on their database configuration so that I can see how schema's, databases, tables, and more are generated. I don't know how to program anything so I would think there are some available applications I could download / use to build my PostgreSQL database.
View 3 Replies View RelatedWhat graphical programming front is best to use for Java and Objective-C programming. I have something in mind like Xcode on Mac.
View 4 Replies View RelatedI know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedThe microphone input of the soundcard itself (it is an on-board Realtek card, standard with most Nforce4 boards) works just fine. Recording quality is very good. But when I try to use the mic input on the front of my PC case, pulseaudio receives no signal from the microphone. Skype doesn't work, Audacity can't record anything either.
Everything is wired inside the case just fine, Windows XP has no problems in using the input on the front. Also the Line-out at the same panel on the front works in F12 without problems, it is just the mic input that doesn't work.
Really interested if anyone knows of any pre-compiled or pre-built demo applications that could run on a MySQL back-end with a web-based front-end?
Ideally, it would be really, really simple having a web front-end that attaches to the database and just either reads data from it (or even enter data into it). Nothing too flash.
I'm thinking along the lines of a LAMP (Linux, Apache, MYSQL, PHP) install but I'm not a developer so if I have to build something I'll probably be out of my league here Does MySQL/Apache etc. have sample/demo databases with a web-front end application that could be fired up and installed without having to build the environment?
Years ago I remember M$ had the PetShop .Net app running on a SQL2000 environment easy to setup and simple enough to showcase the database and a simple front-end. A colleague wrote a small .NET app to just read the data from it and continuously scroll the data in a text box which was fine. Something like that on Linux would be perfect.
When I tried to run an application on terminal in Fedora 10. It occurs an error as following: cannot load front 8*13bold. Does it mean I should install a front package with 8*13bold? If yes, where and how can I install it? I am a beginner.
View 2 Replies View RelatedI have a list of domains in "domains.txt" , and I wanted to put an "nslookup" in front of each line and run it.. However I could not figure out a command for it.. Any ideas how to do this simple task?
View 7 Replies View RelatedI cannot use my front mic port in KDE on Fedora 14 (Upgraded from Fedora 13if that matters) on Skype.In Gnome I can select "Microphone 2" in sound preferences and it works, but in KDE I see no place to select front mix. I tried KMix and the "Phonon" in System Settings.
View 3 Replies View RelatedRelational databases usually have their data over in /var/lib/something. Users are in /home (with data in /var/www). How can I apply a single total disk space quota across all of these independent software systems (file systems, RDBMS, etc.)?
P.S. There's a bet going on around me as to just how awesome SU is. Let's see what you've got.
I have a 2U Rackable Systems server and I'm the engineer in charge of setting up the images for 3 of them for various tasks. The previous engineer was able to change the LCD display on the front of the server to read as the hostname and IP address which was very useful I can't find the script that he used to do it.
How is it possible to change the LCD status screen on the front of the server?
I have a soundblaster audigy 2 connected to 5.1 speakers. The setup was working perfectly with Fedora 11.
I recently upgraded to Fedora 13 and found that it will only play through the center channel, the subwoofer, and the rear channels. The front speakers don't work.
I've tried all possible 5.1 configurations in the "Hardware" section of the "Sound Preferences" dialog. I've also played with the "PulseAudio Volume Control" tool (which seems to have the same functionality).
I also disabled all other sound devices on the system just in case.
I am using F14 Laughlin on my laptop HP Compaq6715b AMD turion 64x2. Installation went fine, only problem is with printer LQ680 24pin series. It is not a real problem that printer want print, it just want print 10 or 15 or 20 pages from tractor bin. I get message: '/usr/lib/cups/filter/rastertoepson failed. It stopped printing after every page, send message, I have to cancel error message, then I can print again. All this is happened if I try to print one by one page from front of printer, I just have to print page with command <ctrl>P.
View 1 Replies View RelatedI have small sound issue - no sound on front panel and headphones are greyed out in alsamixer. This issue appeared after i installed new video card (New video card also adds a pseudo audio device "HDA Nvidia" (without any controls in alsamixer).
View 6 Replies View RelatedI'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
I just installed the Catalyst drivers under FC13 (package xorg-x11-drv-catalyst-10.9-1.fc13.i686 ) and I am superhappy, as it worked straight out of the box.
The only little annoying thing is that I lost the Plymouth graphical boot, which is now substituted with the text scrollbar...
I edited grub.conf and added
Code:
Somewhere I read that that attribute is now obsolete and has to be changed to
Code:
But that did not work either.
am using zabbix open source solution for systems monitoring. I am facing a problem and discussed it on zabbix forum. my post was as "My zabbix server is behaving abnormally, approximately daily from 9 to 12, the server stop accumulating logs. I observed that the server report is RUNNING but it did not accumulate log values and also the machine have no extra load. Its shown in the graph image attached.t the following reply,"database performance?are you monitoring database IO and available database threads? "So any one have any idea that how can I do this as I am using MySQL as backend database on RHEL 3.
View 1 Replies View RelatedThere are times that I would like to open an app as root user without having to use the command line in order to do that. I learned of a nice app in the Fedora repos called beesu and I will show you how to set up a menu entry to be able to use this nice app.
From man beesu:
Code:
See man beesu for more information.
Beesu can be installed in Fedora with the following command:
Code:
IMPORTANT: Beesu must be installed in order to successfully complete this tutorial.
You can use beesu from the command line with the following example:
Code:
This will open gedit as root user after the correct root password has been entered into the password prompt. This is great. However, I'd like to open an app as root user without having to use the command line or alt+f2 run box. So, I wrote a small bash script that uses zenity to prompt the user for an app to open as well as the root password.
Copy the following code into a new text file and name it mybeesu.sh.
Code:
You need to change the /path/to bit in step 4 "Command" to reflect the path to which you saved the mybeesu.sh script. Click the OK button to save the new menu item.
Now, when you click the new menu item from the gnome menu, a zenity window will open asking which app you want to open. After that, a second window will open prompting you for the root password. If all goes well, and you entered the correct root password, your desired app should open as if you used su -c 'foo' to launch it.
I recently installed fedora 13, everything was going great, now when my computer boots it shows the slash screen and then a blank screen and nothing. its been doing it the past few days, after a few reboots it'll work but i'm unable to figure out what is causing it and today it won't show the graphical login screen at all. after the Fedora slash screen the screen goes black the power button shuts it down as normal. ctrl - alt - F2 works and lets me login text wise but I can't get the graphical login to work. nor can I boot to KDE or gnome.I do have Nvidia drivers installed, normall it'll show the nvidia slash screen before the graphical login prompt comes up and that doesn't happen. I did try init 5 and it says Nvidia drivers are loaded. 3d was working just fine I haven't done anything that I can think of to provoke this.
View 3 Replies View RelatedJust recently installed Fedora 12 (GNOME) on my Netbook, just trying to get the boot as fast as possible. So I was wondering how do I turn off the graphical boot? That should save a few seconds.
View 2 Replies View RelatedWhat is a good Ftp server application (preferably with a GUI interface)? I would like something in which you may set a login password. Also, how would you login to an FTP server which is through a router, as the computer IP address will be assigned now by the router, right? Take Linksys router for example, don't they all assign IP addresses to network computers based on the router IP Address, 192.168.1.100, 192.168.1.200, etc?Since post above, I have installed vsftpd. I cannot figure out, as stated above, how to find the IP address to log into from offsite.
View 2 Replies View RelatedDoes Fedora 11 gnome have that gksu graphical authentication program which allows a normal user to open tools such as that NTFS Configuration Tool to enable full ntfs write support ? I did try to find it with both yum in a terminal, and the package manager, but is not found.
View 11 Replies View RelatedMy Fedora11 hangs on boot. I have no idea where or why it is hanging so I want to disable graphical boot. I booted the installation media, the root file system mounted on /mnt, seted /mnt as my root with the chroot command and edited /etc/inittab, then unmounted and rebooted but it didn't help me. Is it possible to run gconf-editor under live cd and disable splash? How can I boot Fedora in single mode? For example use the following steps I'll be able to boot RHEL into single-user mode:
At the GRUB splash screen at boot time, press any key to enter the GRUB interactive menu.
Select Red Hat Enterprise Linux with the version of the kernel that you wish to boot and type a to append the line.
Go to the end of the line and type single as a separate word (press the Spacebar and then type single ). Press Enter to exit edit mode.
Is there a way to run graphical apps as su without launching from the terminal? For example is there a way to open File Browser as su? And if the only way is via the terminal, then how can I find out the names of apps like the File Browser so I can launch them?
View 8 Replies View RelatedRecently, I accidentally erased plymouth from my Fedora 12 system.I now have reinstalled plymouth.But I still do not have my graphical boot. How do I switch back to graphical boot?
View 2 Replies View Related