I recently was having problems with F13([URL].. and I just fixed it by reinstalling F13 and this time selecting "Install Fedora with basic video driver" which is one of the options on the F13 boot screen. This completely fixed the problems.
View 1 RepliesWhen you put in the Fedora disk, it has an option "Install system with basic video driver". What does that mean? If I am not going to download a video driver, is that the better choice?
View 9 Replies View RelatedI am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies View RelatedI've installed the nvidia driver from nvidia website. I don't want to mess up my system So my question is how can I uninstall this nvidia driver? (I want to install the one from youm repo)
And my second question - when I'll be installing my nvidia drivers from repo, this is the best way to go: [URL]
Basically I've just set up a very basic network connecting my vista laptop to fedora 10 laptop via ethernet. I download from the fedora box to an external hd which I can access from both computers. So, my question is, is it possible to have the same video play on both machines, in sync?
View 4 Replies View RelatedI just recently acquired a PII 333 w/ 160M ram (I know, grossly underpowered for anything by today's standards) but mostly wanted it for internet & to use for printer / scanner & camera stuff. So, while checking it out I tried a few live cd's on it (fedora 10 & a ham version of puppy linux) the puppy worked just fine but the fedora "puked" when it got to the GUI (I had this happen with F11 on another computer) The thing that confuses me is, doesn't fedora's live cd have a basic, generic (like a vga 640 x 480) driver that SHOULD work with any video card & monitor or am I missing something here?
View 6 Replies View RelatedI installed Fedora 14 in (Basic Video) mode. How to do i enable nouveau?
View 4 Replies View RelatedI'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
View 7 Replies View Relatedhow do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedI am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
I'm trying to install an ati video card driver, but can't seem to get past this (see screenie)
When I click okay, I expected a prompt to put in my password, but everything just closes.
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI am using Fedora 13 (64-bit). My video card is ATI Radeon HD 4650. I am having problems with the standard Linux driver and somebody has suggested that I should install an ATI-specific video driver. I am told that I should start the PC in failsafe mode, and then tell it to install the "restricted" ATI driver.
View 2 Replies View RelatedFor some reason my laptop runs hotter when running Fedora, than it does with windows. I am wondering if the problem is with video. Currently using default video driver.
View 6 Replies View Relatedhow do I tell if F12 has installed the correct driver for my Dell GX260?
View 10 Replies View Relatedcould anybody tell me how to install fedora14 on X201, especially the video driver. Post added at 12:48 PM GMT Previous post was at 12:40 PM GMT it is Fedora14, i wrote the wrong title.
View 8 Replies View RelatedRecently I got an hp pavilion g4-1016tx laptop, I installed Fedora 15on it, I chose the "install with basic video driver" option, first it workedwell, but yesterday I could only log in with text mode.There are two videocards on my laptop: AMD Radeon HD 6470M Intel GMA HDI tried to install the ATI driver on my laptop, and I still failed to makeit work properly.My error messages are as follows:
# aticonfig --initial
aticonfig: No supported adapters detected
# fglrxinfo
[code]....
Code:
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
server glx extensions:
client glx vendor string: ATI
client glx version string: 1.4
[Code]...
write me a 100% working step-by-step guide to remove all Ati VGA driver and restore the original "mesa" and other things? It's good too if i can just switch back. I have ugly glitches, slowdowns etc. since i installed the driver with fedora "easy life". I know there are many threads about this but i didn't find a clear working explanation.
However, I have had this issue with Windows computers as well, I just don't know how to beat around this problem and fix it with the new OS.
For starters, I have a Sony Vaio laptop (VGN-NS295J) that's running a ATI Mobility 3430 Video card on F14 64bit.
From the beginning, my device was not recognized with a good driver, so I started jumping through hoops reading forums of how to properly install this driver and get rid of the on board video. After I was successful (so I thought) I rebooted my system, and now after Fedora finishes loading the operating system, the screen goes gray and I can start typing in whatever I want.
I can still log in by Ctrl+Alt+F2 or whatever it is, but I'm stuck to text, and don't know my way around well enough yet.
I believe the issue is that it's trying to treat my laptop as two moniters, or defaulted my monitor incorrectly perhaps? At least this is what always happened to me in the past with Windows.
I just fresh installed F14 today, so I don't have anything of importance on the HD.
*UPDATE* Okay, so i've figured out hitting escape lists two versions of Linux there off the boot. The top one repeats the message I've just given, and the second one will go to the Fedora screen right after the boot (where it fills the emblem diagonally), then the screen flashes like it's starting to run my video card, and the screen goes black.
I am running fedora 11 64bit version and just installed cedega to run a few games. I have Nvidia Geforce 9800M GTS 1GB graphics card. and installed my graphics drivers via: yum install kmod nvidia. i downloaded and installed the cedega application from the Cedega download
[Code]...
I have a new Fedora 11 install with all updates working on my: Dell XPS M1330 laptop with nVidia GeForce 8400M GS
I wanted to install compiz fusion on Gnome so I followed these step by step instructions from:
Fedora refused to boot, locking up during the process.
Here is what happens...
After updates I had 3 options at boot up:
A) If I choose the TOP one (newest) it will boot up to a black screen and nothing else, I get a white block which moves with mouse. I cant get a shell and any key I hit just echoes back...ctr-alt-del will result in normal shutdown process displaying.
If I watch the services start (F1) I see all -OK- except: nvidia.ko: Driver already enabled
The boot continues with all OK until it gets to:
STARTING atd:
at which time the screen flashes for about 7 seconds and locks up.
B) If I choose MIDDLE boot option and watch the boot process I see most services start OK except:
-[OK]
Checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.30.8-64.fc11.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until found [WARNING]
Driver already disabled
-[OK]
Then the services continue on with [OK] until a few seconds later the screen halts with a mess of colors and symbols on screen and system stops booting. Any key pressed simply echoes back with no other result. Again ctrl-alt-del refreshes screen and shutdown of services proceeds normally.
Host: CentOS 5.4 x32
Guest: FC12 x32
Virtual machine: Virtual Box (VBox) 3.1.4
The 640 x 480 video display on my FC12 guest is driving me nuts! The VBox Guest Additions are installed. How do I get FC12 to recognize the VBox video driver?
Extra information:
Auto resize works great on my Windows guests. On FC12, I just get a lot of extra white space.
FC12's installer does not detect a video card. You have to use the stand display option (second one down) to get FC12 to go into a full graphical installer. If you use the regular install, hoping to do a graphical install, FC 12 only install the bare basics. No video support. You get what looks like a rescue cd. No Gnone, no X etc.
I do believe that FC12 has no idea that the VBox's fake video adapter even exists.
Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies View RelatedLooking for an option to get Fedora working again, I followed Leighs guide to install the kernel nvidia driver. On Reboot however I am stuck a the Fedora splash.Is there a way when booting to disable splash, or enter in safe mode?I have an nvidia geforce 9 card and I used the non-PAE install.
View 6 Replies View RelatedI install security updates - did so and ended up with a copy of fedora that goes into a loop. I suspect the prob is the driver to my video adapter. To run, I need to interrupt grub with an escape. It then shows me two choices the bad one 2.6.32.12-115.fc12.i686 and the old good one 2.6.31.5.- 127.fc12.i686 It defaults to the bad one, I change it to the good one and tell it ot proceed. this is inconvenient
I see that in /boot/grub/grub.conf the 2 systems are described I beleive that if I merely edit that file, taking out the refernece to the bad one, I will be ok That will leave the bad one on the disk but at least I wont have to go thru the ritual of interrupting grub. If I want to delete the bad one - after I've taken care of the grub.conf file, what do I do?
Attempting to install 10.04... I can get to the "Where are you?" screen, then the little circular "please wait" cursor spins forever and ever.
Here are a few things I've tried, with no success:Leaving it alone for hours, hoping it was just taking a really long time. No Dice. Unplugging any hardware that might be causing a problem, including the network card. No dice. Burning it to CD, DVD, and booting from a USB key. No dice. Trying every combination of kernel options I could find in the forums, and setting most combinations found in the "more options" menu in the boot screen. No dice. Booting into the live environment, then installing from there (instead of just choosing "install" directly). No Dice. Booting both from the 32-bit and 64-bit ISOs (my machine is 64-bit)
Note: I have not tried just upgrading from my 9.10 install, and I will not try this. If I can't get a live CD to boot, there's no way I would voluntarily hose my current system by upgrading.
Also note: I checked the MD5 of the ISO, and did the "check the disk for defects" menu option as well. Everything checks out fine.
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies View RelatedUnder Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies View Related